• Journal of Welding and Joining
• /
• 제19권2호
• /
• pp.182-190
• /
• 2001

A marine structural material was well known to have high tensile strength, good weldability and proper corrosion resistance. Cu-containing high strength low alloy(HSLA) steel was recently developed for their purposes mentioned above. And the steel is free about preheating for welding, therefore it is reported that shipbuilding cost by using it can be saved more or less. However the marine structural materials like Cu-containing HSLA steel are being generally adopted with cathodic protection method in severe corrosive environment like natural sea water but the high strength steel may give rise to Hydrogen Embrittlement due to over protection at high cathodic current density for cathodic protection. In this study Cu-containing HSLA steel using well for marine atructure was investigated about the susceptibility of Hydrogen Embrittlement as functions of tensile strength, strain ratio, fracture time, and fracture mode, etc. and an optimum cathodic protection potential by slow strain rate test(SSRT) method as well as corrosion properties in natural sea water. And its corrosion resistance was superior to SS400 steel, but Hydrogen Embrittlement susceptibility of Cu-containing HSLA steel was higer than that of SS400 steel. However Hydrogen Embrittlement of its steel by SSRT method was showed with pheonomena such as decreasing of fracture time, strain ratio and fracture mode of QC(quasi-cleavage). Eventually it is suggested that an optimum cathodic protection potential not presenting Hydrogen Embrittlement of Cu-containing of HSLA steel by SSRT method was from-770mv(SCE) to - 900mV(SCE)under natural sea water.

• Corrosion Science and Technology
• /
• 제2권6호
• /
• pp.283-288
• /
• 2003

The cathodic protection method is being widely used in marine structural steel, however a high tensile steel like RE 36 steel for marine structural steel is easy to get hydrogen embrittlement due to over protection during cathodic protection as well as preferential corrosion of HAZ(Heating Affected Zone) part. In this paper, corrosion resistance and mechanical properties such as elongation and hydrogen embrittlement were investigated with not only in terms of electrochemical view but also SSRT(Slow Strain Rate Test) method with applied constant cathodic potential, analysis of SEM fractography in case of both As-welded and PWHT(Post-Weld Heat Treatment) of $550^{\circ}C$. The best effect for corrosion resistance was apparently indicated at PWHT of $550^{\circ}C$ and elongation was increased with PWHT of $550^{\circ}C$ than that of As-welded condition. On the other hand. Elongation was decreased with applied potential shifting to low potential direction which may be caused by hydrogen embrittlement, however the susceptibility of hydrogen embrittlement was decreased with PWHT of $550^{\circ}C$ than that of As-welded condition and Q.C(quasi cleavage) fracture mode was also observed significantly according to increasing of susceptibility of hydrogen embrittlement. Eventually it is suggested that an optimum cathodic protection potential range not causing hydrogen embrittlernent is from -770 mV(SCE) to -850 mV(SCE) in As-welded condition while is from -770 mV(SCE) to -875 mV(SCE) in PWHT of $550^{\circ}C$.

• 한국융합학회논문지
• /
• 제8권9호
• /
• pp.161-174
• /
• 2017

본 연구는 성인의 구강건강실천 결정요인에 관한 인과관계를 융합적으로 분석하여 성인의 구강건강증진을 위한 기초자료로 활용되고자 함이다. 연구방법은 부산 경남지역에 거주하는 성인을 대상으로 설문 조사한 자료 204부를 Smart PLS v2.0 M2 소프트웨어를 통해 연구모형을 검증하였다. 그 결과 구강건강신념 요인 중 구강병의 심각성 및 감수성과 구강관리행위의 유익성이 구강 건강 관련 자기효능감에 영향을 미치는 것으로 나타났고, 일상적 구강건강관리행위 자기효능감은 구강건강실천 전반에 유의한 영향을 미치는 것으로 나타났다. 구강건강신념 요인 중 구강병의 심각성 및 감수성과 구강병 예방행위의 유익성은 칫솔질 관련 자기효능감을 경유하여 칫솔질 습관과 구강검진 및 교육에 영향을 미치는 것으로 나타났다. 따라서 성인의 계속 구강 건강관리 프로그램 개발을 통한 구강건강신념에 대한 인식 개선과 함께 다양한 교육 매체를 개발하는 등의 전략적 노력이 이루어진다면 구강건강관련 자기효능감이 높아져 지속가능한 구강건강실천이 이루어질 것으로 기대된다.

• Journal of Welding and Joining
• /
• 제17권5호
• /
• pp.47-54
• /
• 1999

It is well known that solidification cracking often occurs in welds of root pass for one-side welding under the conditions of high welding currents and speeds. In this study, the solidification in 590MPa class steel for pressure vessels SPPV490 was investigated by using flux-cored arc welding(FCAW) with 4 types of welding wires and welding conditions of 200∼280A and 2.8∼ 4.2mm/sec. In order to compared the result of cracking in SPPV490, 0.2%C steel for welded structure of SWS400 and 0.45%C steel for machine structural SM45C were also used as base metals. As the results, all the cracks formed in some welding conditions were observed near the center of weld bead. The solidification cracks were generally initiated near the upper surface of bead and propagated toward the inner part. The solidification cracking generally increased with welding current and welding speed in the same base metal and welding material. In cracking susceptibility, SPPV490 showed higher cracking susceptibility than SWS400 in all welding conditions and welding materials. It was considered that cracking susceptibility could not be evaluated with the hardness of weld metals. The cracking ratio increased with decreasing of a/b(a and b; the width of the upper surface and the back surface of the bead) as shape factor of bead. The cracking tendency with shape factor of bead was extended under the condition of higher welding currents.

• 자원환경지질
• /
• 제54권6호
• /
• pp.629-647
• /
• 2021

Located in the eastern part of the Anti-Atlas, the Tafilalet region shows numerous dykes and sills that crosscut the Paleozoic terrains. The magmatic structures (dykes and sills) of the Tadaout-Tizi n'Rsas (TTR) anticline is studied here, it located neighboring the main branch of the Anti-Atlas Major Fault (AAMF), known in this location as the Oumejrane-Taouz Fault (OJTF). The N20° to N60° trending dykes crosscut the Paleozoic formations (Ordovician to Devonian), whereas sills are injected into the Silurian and Devonian ones. The dyke swarms of TTR have been studied using the Anisotropy of Magnetic Susceptibility (AMS), petrographic study and structural analyses. The petrographic study of the TTR doleritic dykes shows a dominance of plagioclase feldspars, alkali feldspars, amphiboles, pyroxenes and biotite. The dykes contain also mesotype (natrolite), sphene (titanite), apatite, actinolite and pegmatitic enclaves of biotite, orthoclase feldspars and pelites. Concerning field works, they show the deformation of TTR dykes by the Variscan tectonics events, it is marked by the presence of displacements (strike-slip faults) and cleavages. The Magnetic Susceptibility (MS) measured on magmatic specimens show the dominance of ferromagnetic and paramagnetic minerals. The high values of MS in the dykes are due to the presence of hematite, amphibole, pyroxene and biotite. In addition their magnetic fabric, determined by our AMS study, allows us to reconstitute the tectonic event which affected the magmatic bodies. This one is characterized by a magnetic foliation and a NNW-trending lineation that reflect the Variscan shortening orientation.

• Structural Engineering and Mechanics
• /
• 제61권6호
• /
• pp.755-763
• /
• 2017

In this study, the susceptibility of different symmetric steel buildings with dual frame system to Progressive Collapse (PC) was assessed. Some ten-story dual frame systems with different type of braced frames (concentrically and eccentrically braced frames) were considered. In addition, numbers and locations of braced bays were investigated (two and three braced bays in exterior frames) to quantitatively find out its effect on PC resistance. An Alternate Path Method (APM) with a linear static analysis was carried out based on General Services Administration (GSA 2003) guidelines. Maximum Demand Capacity Ratio (DCR) for the elements (beams and columns) with highest DCRs ($DCR_{moment}$ and $DCR_{shear}$) is given in tables. The results showed that the three braced bays with concentric braced frames especially X-braced and inverted V-braced frame systems had a lower susceptibility and greater resistance to PC. Also, the results represented that the beams were more critical than columns against PC after the removal of column.

• Journal of Advanced Marine Engineering and Technology
• /
• 제41권2호
• /
• pp.171-175
• /
• 2017

The high-tech large warships are minimal and they are always monitored by opponents, and become primary targets when conflicts occur. The improvement in reducing susceptibility has significant importance because it is difficult for a ship to maintain mission capability and functionality once it is damaged. Ordinary decoys are effective only under the premise that the ship has already been exposed. Traditionally, for naval vessels, techniques related to the radar have been used in military stealth techniques to ensure confidentiality. The corner reflector, on the other hand, can produce rather large radar cross sections. Continued use of deceptive systems such as chaff during operations will help to improve survivability of naval ships. From this viewpoint, corner reflector was considered for making radar countermeasures and deception technology. This paper reviews the current status of corner reflector basis decoys and the technical feasibility of corner reflectors for developing structural decoys.

• 대한화학회지
• /
• 제29권3호
• /
• pp.304-310
• /
• 1985

송아지 흉선 nucleohistone의 DNase 1에 對한 susceptibility와 相互作用의 cooperativity에 미치는 spermine의 效果를 nucleostone의 構造變移와 關聯시켜 調査하였다. 이들 data로 부터 nucleohistone은 遊離 DNA와는 對照的으로 spermine에 의하여 monomoclecular condensation을 일으키지 않고 intermolecular aggregation을 이루며 nucleohistone의 DNase 1과의 相互作用 cooperativity가 spermine에 의하여 增加됨을 推理할 수 있다. Nucleohistine의 histone 部分의 cooperativity에 關한 機能的 役割을 究明하기 위하여 histone 部分을 단실化시킨 DNS-nucleohistone을 製造하여 DNase 1 과의 相互作用을 調査하여 보았는바 negative cooperativity로 나타났다. 이로 부터 nucleohistone의 histone部分은 nucleohistone의 cooperativity에 影響을 미치리라고 推理할 수 있다.

• Bulletin of the Korean Chemical Society
• /
• 제11권6호
• /
• pp.564-567
• /
• 1990

A lithiated compound $Li_{0.1}Pr^{3+}Ba_2Cu_3O_y$ has been successfully prepared by electrochemical method, which is achieved with a two electrode cell of the type: Metal(Li)/($Li^+\;,\;ClO_4^-$) + propylene carbonate/$PrBa_2Cu_3O_y$. All Pr ions in the lithiated compound are stabilized with a trivalent state as the other rare earths (Ⅲ) substituted in the 90K superconductor lattice ($Y_{1-x}Ln_x^-Ba_2Cu_3O_{7-{\delta}}$). Powder X-ray diffraction analysis shows that both compounds, $PrBa_2Cu_3O_y$ and $Li_{0.1}PrBa_2Cu_3O_y$ are isostructural with the 90 K superconductor, ($YBa_2Cu_3O_{7-{\delta}}$), nevertheless both of them are non-metallic and also non-superconducting down to 10 K. Magnetic susceptibility ${\chi}$ vs. temperature data indicate that Curie contribution from the magnetic ions (Pr and Cu) is weakened on the one hand, but on the other hand temperature-independent part of susceptibility ${\chi}_o$ increases depending upon the rate of lithium intercalation in $PrBa_2Cu_3O_y$ lattice.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권11호
• /
• pp.253-264
• /
• 2021

The COVID-19 pandemic has imposed a number of restrictions on the lives of people and services, forcing them to adopt a "New Normal" way of living. Contactless technologies provide a mechanism to reduce the risk of infection, encouraging people to use touchless payment methods. The aim of this study is to develop an integrated framework based on the Health Belief Model and the Unified Theory of Acceptance and Use of Technology to justify the use of mobile payment during the COVID-19 pandemic in Vietnam. Based on a survey of 434 samples, the proposed conceptual model was empirically justified using structural equation modeling (SEM). This study found that performance expectancy, effort expectancy, enjoyment, perceived severity, and perceived susceptibility significantly and positively influenced behavioral intention of using contactless payment technologies. In addition, this study discovered that effort expectancy, perceived severity, and perceived susceptibility all have a positive impact on performance expectancy, while enjoyment triggered users' effort expectancy. By adding novel insights into the literature on the acceptance of technology during the pandemic, this study makes a major contribution to justifying how contactless payment technologies can reduce the risk of getting infected by COVID-19.