• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.1
• /
• pp.43-58
• /
• 2002

A methodology to nondestructively locate and estimate size of damage in beam-type structures using a few natural frequencies or a few mode shapes is presented. A damage-localization algorithm to locate damage from changes in natural frequencies and a damage-sizing algorithm to estimate crack-size from natural frequency perturbation are outlined. A damage index algorithm to localize and estimate severity of damage from monitoring changes in mode shapes is outlined. The frequency-based method and the mode-shape-based method are evaluated for several damage scenarios by locating and sizing damage in PS concrete beams lot which a few natural frequencies and mode shapes are generated from finite element models. The result of the analyses indicates that the two methods correctly localize and closely estimate the size of the crack simulated in the test beam.

• The Journal of Fisheries Business Administration
• /
• v.37 no.2 s.71
• /
• pp.111-139
• /
• 2006

Cold storage warehouse industry in Japan has been extended in its scale in terms of both the number of storages and cold storage capacity in order to meet the extended reproduction of the marine products industry. However, increasing total amount of the stored goods since mid 80s led to relative decrease of marine products while the number of storages was remained the same or decreased, though cold storage capacity was gradually increased and is maintained the increase of the average cold storage capacity. As structural change in the cold storage warehouse industry emerges, cold storage warehouses require new approach to individual storage management with 1)diversity of the stored goods; 2) more competition due to increase of the cold storage capacity; and 3) sizing of the average cold storage capacity. Therefore, this study analyzed how cold storage warehouse management activity with individual storage sizing changes; and significance of sizing and functional change in cold storage warehouses experiencing sizing, by observing leading cold storage warehouse industry of the metropolitan area in Japan. In conclusion, reorganization of cold storage warehouse industry in the metropolitan area in Japan can be summarized as follows: First, competition among cold storage warehouses in the metropolitan area in Japan is not simply limited to storage industry but extended to establishment and securing physical distribution function. Second, since cold storage warehouse industry is in Scrap & Build phase, decision of management executives on whether taking direction to maintain/continue enhancement of physical distribution function may cause drastic reorganization in the cold storage warehouse industry, Third, since profit of physical distribution management based on cold storage warehouses is insignificant, it is not easy to accomplish expected management outcome, Fourth, today's cold storage warehouse industry mainly characterized by diversity of the stored goods needs facility reorganization with comprehensive and functional integration covering from F class cold storage capacity to F&C class.

• Structural Engineering and Mechanics
• /
• v.5 no.1
• /
• pp.59-68
• /
• 1997

A two-step method is presented for the optimum design of trusses with available sections under stress and Euler buckling constraints. The shape design of the truss is used as a means to convert the discrete solution into a continuous one. In the first step of the method, a continuous solution is obtained by sizing and shape design using an approximate polynomial expression for the buckling coefficients. In the second step, the member sizes obtained are changed to the nearest available sections and the truss is reconfigured by using the exact values for the buckling coefficients. The optimizer used is based on the sequential quadratic programming and the gradients are evaluated in closed form. The method is illustrated by two numerical examples.

• Computers and Concrete
• /
• v.3 no.5
• /
• pp.313-334
• /
• 2006

A novel formulation aiming to achieve optimal design of reinforced concrete (RC) structures is presented here. Optimal sizing and reinforcing for beam and column members in multi-bay and multistory RC structures incorporates optimal stiffness correlation among all structural members and results in cost savings over typical-practice design solutions. A Nonlinear Programming algorithm searches for a minimum cost solution that satisfies ACI 2005 code requirements for axial and flexural loads. Material and labor costs for forming and placing concrete and steel are incorporated as a function of member size using RS Means 2005 cost data. Successful implementation demonstrates the abilities and performance of MATLAB's (The Mathworks, Inc.) Sequential Quadratic Programming algorithm for the design optimization of RC structures. A number of examples are presented that demonstrate the ability of this formulation to achieve optimal designs.

• Structural Engineering and Mechanics
• /
• v.10 no.4
• /
• pp.313-336
• /
• 2000

The focus of this paper is on the development and implementation of a methodology for automated design of discrete structural systems. The research is aimed at utilizing Genetic Algorithms (GA) as an automated design tool. Several key enhancements are made to the simple GA in order to increase the efficiency, reliability and accuracy of the methodology for code-based design of structures. The AISC-ASD design code is used to illustrate the design methodology. Small as well as large-scale problems are solved. Simultaneous sizing, shape and topology optimal designs of structural framed systems subjected to static and dynamic loads are considered. Comparisons with results from prior publications and solution to new problems show that the enhancements made to the GA do indeed make the design system more efficient and robust.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.21 no.1
• /
• pp.62-67
• /
• 2013

Human Powered Aircraft (HPA) should be light in weight and have high efficiency because power source of propulsion is human muscles. Airframe structure takes up most of empty weight of aircraft, so weight reduction of structure is very important issue for HPA. In this paper, design/analysis/test procedures for ultra light weight structure of the HPA developed by Korea Aerospace Research Institute (KARI) are explained briefly. Structural design is conducted through case studies on HPA in the USA and Japan. Loads analysis is performed to calculate design loads which is needed for structural design and analysis. Structural analysis is conducted for structure sizing. Static strength test of main wing spar which is primary structure of wing is performed to verify structural integrity.

• Structural Engineering and Mechanics
• /
• v.50 no.3
• /
• pp.365-382
• /
• 2014

In this article, the force method and Charged System Search (CSS) algorithm are used for the analysis and optimal design of truss structures. The CSS algorithm is employed as the optimization tool and the force method is utilized for analysis. In this paper in addition to member's cross sections, redundant forces, geometry and topology variables are considered as the optimization variables. Minimum complementary energy principle is used directly to analyze the structure. In the presented method, redundant forces are calculated by the CSS in order to minimize the energy function. Combination of the CSS and force method leads to an efficient algorithm in comparison to some of the optimization algorithms.

• Structural Engineering and Mechanics
• /
• v.3 no.4
• /
• pp.359-372
• /
• 1995

This study presents an efficient method for optimum design of plate and shell structures, when the design variables are continuous or discrete. Both sizing and shape design variables are considered. First the structural responses such as element forces are approximated in terms of some intermediate variables. By substituting these approximate relations into the original design problem, an explicit nonlinear approximate design task with high quality approximation is achieved. This problem with continuous variables, can be solved by means of numerical optimization techniques very efficiently, the results of which are then used for discrete variable optimization. Now, the approximate problem is converted into a sequence of second level approximation problems of separable form and each of which is solved by a dual strategy with discrete design variables. The approach is efficient in terms of the number of required structural analyses, as well as the overall computational cost of optimization. Examples are offered and compared with other methods to demonstrate the features of the proposed method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.149-154
• /
• 2004

The design sensitivity analysis of Zwicker's loudness with respect to structural sizing design variables is developed. The loudness sensitivity in the critical band is composed of two equations, the derivative of main specific loudness with respect to 1/3-oct band level and global acoustic design sensitivities. The main specific loudness is calculated by using FEM, BEM tools. i.e. MSC/NASTRAN and SYSNOISE. And global acoustic sensitivity is calculated by combining acoustic and structural sensitivity using the chain rule. Structural sensitivity is obtained by using semi-analytical method and acoustic sensitivity is implemented numerically using the boundary element method. For sensitivity calculation, sensitivity analyzer of loudness (SOLO), in-house program is developed. A 1/4 scale car cavity model is optimized to show the effectiveness of the proposed method.

• International Journal of High-Rise Buildings
• /
• v.8 no.2
• /
• pp.83-94
• /
• 2019

Diagrid structures have emerged in recent decades as an innovative solution for tube tall buildings, capable of merging structural efficiency and aesthetic quality. This paper investigates the effect of the building slenderness (grossly quantified by means of the aspect ratio, i.e., the ratio between the height and the plan dimension) on the structural behavior and on the optimal design parameters of diagrid tall buildings. For this purpose, building models with different slenderness values are designed by adopting preliminary design criteria, based on strength or stiffness demands; in addition, a design method based on a sizing optimization process that employs genetic algorithms is also proposed, with the aim to compare and/or refine the results obtained with simplified approaches.