• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 봄 학술발표회 논문집
• /
• pp.160-167
• /
• 1993

In earthquake structural engineering towards a better understanding of both the earthquake ground motion and structural response, the design of concrete structures to resist strong ground input motions is not a simple matter, and analytical models for such structures must be developed from a design perspective that accounts for the complexities of the structural responses. The primary objective earthquake structural engineering research is to ensure the safety of structures by understanding and improving a design menthodology. Ideally, this would require the development of an analytical model related to a design methodology that ensures a dectile performance. For the accurate assessment of the adequacy of analytically developed model, experiments conducted to study the inplane inelastic cyclic behavior of structures should verify the analytical approach. The paper is to demonstrate experimentally verified analytical method that provide the adequate degree of safety and confidience in the behavior of R.C. structural components and further attempts to extend the developed modeling technique for use by practicing structural engineers.

• 한국전산구조공학회논문집
• /
• 제36권4호
• /
• pp.273-282
• /
• 2023

원자력발전소 지진 확률론적 안전성 평가인 PSA(Probabilistic Safety Assessment)는 오랜 기간에 걸쳐 확고히 구축되어 왔다. 반면에 다양한 공정 기반의 산업시설물의 경우 화재, 폭발, 확산(유출) 재난에 대해 주로 연구되어 왔으며, 지진에 대해서는 상대적으로 연구가 미미하였다. 하지만, 플랜트 설계 당시와 달리 해당 부지가 지진 영향권에 들어갈 경우 지진 PSA 수행은 필수적이다. 지진 PSA를 수행하기 위해서는 확률론적 지진 재해도 해석(Probabilistic Seismic Hazard Analysis), 사건수목 해석(Event Tree Analysis), 고장수목 해석(Fault Tree Analysis), 취약도 곡선 등을 필요로 한다. 원자력 발전소의 경우 노심 손상 방지라는 최우선 목표에 따라 많은 사고 시나리오 분석을 통해 사건수목이 구축되었지만, 산업시설물의 경우 공정의 다양성과 최우선 손상 방지 핵심설비의 부재로 인해 일반적인 사건수목 구축이 어렵다. 따라서, 본 연구에서는 산업시설물 지진 PSA를 수행하기 위해 고장수목을 바탕으로 확률론적 시각도구인 베이지안 네트워크(Bayesian Network, BN)로 변환하여 리스크를 평가하는 방법을 제안한다. 제안된 방법을 이용하여 임의로 생성된 가스플랜트 Plot Plan에 대해 최종 BN을 구축하고, 다양한 사건 경우에 대한 효용성있는 의사결정과정을 보임으로써 그 우수성을 확인하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.717-723
• /
• 2002

Recently, the interest in safety assessment of civil infrastructures is increasing in Korea. Especially, as bridge structures become large-scale, it is necessary to monitor and maintain the safety state of bridges, which requires the monitoring system that can make a long-term measurement during the service time of bridge. In this paper, advanced fiber optic sensors for long-term measurement, setup techniques of bridge monitoring system and the assessment of measured data are introduced. Attached or embedded optical fiber sensors to structural members of small and big structures including Sung San Bridge are surveyed. For the Sung San Bridge, the responses of the fiber optic sensors by 30 ton weigh truck loads with various speeds ate measured. Monitoring system is also applied to the mock-up of bridges. The monitoring capability of the advanced fiber optic sensor system was confirmed.

• 전산구조공학
• /
• 제11권4호
• /
• pp.351-360
• /
• 1998

본 논문에서는 실용적 체계신뢰성에 기초한 강사장교의 안전도평가를 위한 체계적인 모형을 제안하였다. 공용중인 강사장교의 시스템 안전도평가를 위하여 요소신뢰성해석을 위한 케이블, 주형 그리고 주탑의 한계 상태모형과 각 요소들간의 조합파괴를 포함하는 주파괴경로를 정의할 수 있는 체계신뢰성해석 모형을 제안하였다. 요소신뢰성해석을 위한 수치해석기법으로는 AFOSM(Advanced First Order Second Moment) 방법을 사용하였고, 체계신뢰성해석을 위해서는 부분 ETA(partial Event Tree Analysis) 모형을 사용하였다. 제안된 방법의 타당성을 고찰하기 위하여 진도대교의 안전도 평가에 적용하였다. 부분 ETA 모혀을 사용한 체계신뢰성 평가 방법은 기존의 요소신뢰성 방법에 비해 구조물의 여용성을 충분히 반영하는 상당히 합리적이며 실제적인 결과를 보여주는 실용적인 방법으로 판단된다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1990년도 봄 학술발표회 논문집
• /
• pp.37-43
• /
• 1990

This paper develops practical models and methods for the assessment of safety and rating of damaged and/or deteriorated bridges by incorporating a system identification technique for the explicit inclusion of the degree of deterioration or damage and of the actual bridge response. And, based on the proposed model, reliability-based rating methods are proposed as LRFR(Load and Resistance Factor Rating) and system reliability-index rating criteria. The proposed limit state model explicitly accounts for the degree of deterioration or damage in terms of the damage and response factors. The damage factor in the paper is proposed as the ratio of the current stiffness to the intact stiffness. Based on the observation and the results of applications to existing bridges, it may be concluded that the proposed rating models, which explicitly account for the uncertainties and the effects of degree of deterioration or damage based on the system identification technique, provide more realistic and consistent safety-assessment and capacity-rating.

• 한국압력기기공학회 논문집
• /
• 제7권4호
• /
• pp.31-37
• /
• 2011

Pressurized Water Reactor Owners Group(PWROG) proposed and applied a risk-informed inservice inspection(RI-ISI) program to alternate existing ASME Section XI periodic inspections. The RI-ISI programs enhance overall safety by focusing inspections of piping at high safety significant(HSS) and locations where failure mechanisms are likely to be present, and by improving the effectiveness on inspection of components because the examination methods are based on the postulated failure mode and the configuration of the piping structural element. The RI-ISI programs can reduce NDE, man-rem exposure, costs of engineering analysis, outage duration and chance of complicating plant operations etc. RI-ISI methods of piping inservice inspection were applied on 3 units(KSNP : Korea Standard Nuclear Power Plant) and are scheduled to apply on the other units. In this paper, we compared and showed the results of the 2 units and we concluded that the RI-ISI application could enhance and maintain plant safety and give unquantifiable benefits.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 가을 학술발표회 논문집
• /
• pp.118-125
• /
• 2004

The assessment of fatigue property is one of the most indispensable factors to design mechanical structures or parts. For accurately assessing fatigue property, it is necessary to precisely identify the loading condition and material property of the objective structure. However, there are many kind of problems in conducting predictive activity for a design concerned with variable factor such as fatigue phenomenons and environments. Therefore, most of the fatigue problems have been assessed from exiting experiment data and prediction method. In this study, expert system is developed for simply conducting performance assessment of weldments based on Finite element Analysis carrying out performance improvement and safety assessment of welded structures.

• 한국산학기술학회논문지
• /
• 제21권10호
• /
• pp.40-47
• /
• 2020

화재예방 및 신속대응을 위한 다양한 기술, 시스템 및 법제도가 도입되고 있지만 매년 화재로 인한 인명 및 재산피해는 줄지 않고 있다. 화재로 인한 재난을 관리하기 위해서는 공간정보 기반의 안전상태지도의 개발이 필요하며, 각 위치정보에 대한 속성정보의 적합성을 확보하는 것이 필요하다. 안전상태지도는 목적에 맞는 안전상태 평가의 평가항목을 도출하고, 지수화 한 후, 다양한 방법으로 조사한 결과를 위치정보에 정합시켜서 제작된다. 본 논문에서는 3D 안전상태지도 제작을 위한 건물 화재안전 평가항목을 도출한다. 우선, 국내외 안전평가 모델의 평가항목을 조사하여 한국 3D 안전상태지도로의 적용성을 분석한다. 다음으로 화재안전 평가모델의 평가항목을 도출한다. 평가항목은 정보수집 활동에 따라 '건물의 기본정보를 통하여 평가가 가능한 항목'과 '현장조사를 통하여 평가가 가능한 항목'으로 구별되어 도출된다. 항목 도출 결과, 다섯 개 카테고리(업종위험, 건물 안정성, 소방 설비 시설, 화재위험성, 화재대응상태)에 걸쳐 총 14개의 평가항목을 도출하였다.

• Structural Engineering and Mechanics
• /
• 제49권2호
• /
• pp.163-182
• /
• 2014

Safety factors proposed in codes CEB, B.A.E.L 91 and EUROCODE 1 cover a great number of uncertainties; making them inadequate for the assessment of existing structures. Suitable safety factors are established using a probabilistic assessment, once real dimensions, materials strength and existing structures deterioration mechanisms are taken into account. This paper presents a calibration method for safety factors using a typical set of RC bridges in France. It considers the principal stages of corrosion provoked by $CO_2$ and $Cl^-$ penetration and threshold indexes (${\beta}_0$) for existing structures. Reliability indexes are determined by the FORM method in the calibration method.

• 한국안전학회지
• /
• 제27권1호
• /
• pp.44-48
• /
• 2012

The seismic safety of long-period cable-stayed bridges is assessed by probabilistic finite element analysis and reliability analysis under NFE. The structural response of critical members of cable-stayed bridges is evaluated using the developed probabilistic analysis algorithm. In this study, the real earthquake recording(Chi-Chi Earthquake; 1997) was selected as the input NFE earthquake for investigating response characteristics. The probabilistic response and reliability index shows the different aspect comparing the result from FFE earthquake. Therefore, the probabilistic seismic safety assessment on NFE earthquakes should be performed for the exact evaluation of long-period cable-stayed bridges and the earthquake resistant design criteria should be complemented.