• Structural Engineering and Mechanics
• /
• 제5권3호
• /
• pp.221-237
• /
• 1997

This paper presents a new uniaxial material model for rate-sensitive analysis addressing both the transient and steady-state responses. The new model adopts visco-plastic theory for the rate-sensitive response, and employs a three-parameter representation of the overstress as a function of the strain-rate. The third parameter is introduced in the new model to control its transient response characteristics, and to provide flexibility in fitting test data on the variation of overstress with strain-rate. Since the governing visco-plastic differential equation cannot be integrated analytically due to its inherent nonlinearity, a new single-step numerical integration procedure is proposed, which leads to high levels of accuracy almost independent of the size of the integration time-step. The new model is implemented within the nonlinear analysis program ADAPTIC, which is used to provide several verification examples and comparison with other experimental and numerical results. The companion paper extends the three-parameter model to trilinear static stress-strain relationships for steel and concrete, and presents application examples of the proposed models.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 봄 학술발표회 논문집
• /
• pp.419-426
• /
• 2003

Simplified modeling approach for the seismic behavior of a reinforced concrete bridge is investigated in this paper. For this purpose, a hysteretic axial-flexure interaction model was developed and implemented into a nonlinear finite element analysis program. Thus, the seismic response of reinforced concrete bridge piers was evaluated by the simplified point hinge representations. Comparative studies for reinforced concrete bridge piers indicated that the analytical predictions obtained with the new formulations showed a good correlation with experimental results. In addition, seismic response analysis of a reinforced concrete bridge utilizing the simplified point hinge model revealed the adequacy and applicability of the present development.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권5호
• /
• pp.27-36
• /
• 2020

이 논문의 목적은 말뚝식 계류시설에 대해 현행 실무에서 주로 적용하고 있는 응답스펙트럼 해석법에서 표준설계응답스펙럼의 적용성에 대해 연구하는 것이다. 이를 위하여 다양한 지층조건을 고려한 Proshake 1차원 부지응답을 수행하여 현행 표준설계응답스펙트럼과 비교하고, Abaqus를 활용한 지반-말뚝 모델링으로 시간이력해석을 수행하여 지반-말뚝 동적거동 특성을 분석하였으며, 잔교시설이 설치되는 경사지반에 대해 Abaqus를 활용한 2차원 부지응답해석을 수행하여 응답스펙트럼의 기준면 선정방안을 검토하였다. 연구 결과 말뚝식 계류시설의 지반-말뚝 동적거동 특성과 경사지반의 특성을 고려할 경우 현행 표준설계응답스펙트럼의 적용성에 문제가 있으며 개선이 필요하다는 것을 확인하였다.

• 전산구조공학
• /
• 제22권3호
• /
• pp.35-40
• /
• 2009

• 전산구조공학
• /
• 제37권2호
• /
• pp.16-23
• /
• 2024

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1995년도 봄 학술발표회 논문집
• /
• pp.107-113
• /
• 1995

This paper presents the earthquake response analysis results on the Large-Scale Seismic Test (LSST)structure which was built at Hualien in Taiwan. The seismic analysis is carried out using a computer code KIESSI, which has been developed based on the three-dimensional axisymmetric finite element method incorporating infinite elements for the far field soil region. The soil and structural properties obtained from the post-correlation study of the forced vibration tests (FVT) are utilized to predict seismic responses. The ground accelerations recorded at a site 56.5 m from the test structure are used as control motions. It has been found that the predicted responses are reasonably compared with the observed responses.

• Structural Engineering and Mechanics
• /
• 제6권8호
• /
• pp.841-856
• /
• 1998

During the 1995 Hyogoken-Nanbu Earthquake, a reinforced concrete building, called Jeunesse Rokko, suffered intermediate damage by forming a beam-yielding (weak-beam strong-column) mechanism, which has been regarded as the most desirable earthquake resisting mechanism throughout the world. High cost to repair damage at many beam ends and poor appearance expected after the repair work made the owner decide to tear down the building. Nonlinear earthquake response analyses were conducted to simulate the behavior of the building during the earthquake. The influence of non-structural members was considered in the analysis. The calculated results were compared with the observed damage, especially the location of yield hinges and compression failure of spandrel beams, and the degree of cracking in columns and in column-girder connections.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.525-525
• /
• 2005

This study is for the seismic analysis and the structural integrity evaluation of the box beam for supporting nuclear fuel-transfer-basket of the HANARO reactor pool. For performing the seismic analysis and evaluating the structural integrity in air or submerged condition, the finite element model of the fuel-transfer-basket and its supporting box beam(the coupled model) was developed. The hydrodynamic effect is also considered by using added mass concept. The seismic response spectrum analyses of the coupled model under the design floor response spectrum loads of Safe Shutdown Earthquake(SSE) were performed. Through the numerical experiments, the analysis results show that the stress values of the coupled model lot the structural integrity are within the ASME Code limits.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.295-300
• /
• 2007

Probabilistic Risk Assessment considering statistically random variables is performed for the preliminary design of a Arch Bridge. Component reliabilities of girders have been evaluated using the response surfaces of the design variables at the selected critical sections based on the maximum shear and negative moment locations. Response Surface Method (RSM) is successfully applied for reliability analyses for this relatively small probability of failure of the complex structure, which is hard to be obtained by Monte-Carlo Simulations or by First Order Second Moment Method that can not easily calculate the derivative terms of implicit limit state functions. For the analysis of system reliability, parallel resistance system composed of girders is changed into parallel series connection system. The upper and lower probabilities of failure for the structural system have been evaluated and compared with the suggested prediction method for the combination of failure modes. The suggested prediction method for the combination of failure modes reveals the unexpected combinations of element failures in significant]y reduced time and efforts compared with the previous permutation method or system reliability analysis method.

• 전산구조공학
• /
• 제10권3호
• /
• pp.217-223
• /
• 1997

본 논문은 집중 질량 구조물의 천이응답에 대한 시간영역 민감도 해석의 기본 개념을 설명한다. 외부 가진에 따른 구조물의 응답에 미치는 설계변수 변화의 영향을 구하기 위해 시간영역 민감도 함수를 구하는 방법을 제시하였다. 시간영역에서 구조물의 설계변수 민감도는 1차 표준 민감도 함수와 백분율 민감도 함수를 통해 확인하였다. 이러한 민감도 함수와 그 계산은 설계변수에 대한 시스템 상태변수의 편미분에 의한 것이다. 또한, 직접 미분법에 의한 해석적 방법의 편미분 결과와 수치적 방법에 의한 결과를 비교하였다.