• Structural Engineering and Mechanics
• /
• 제42권4호
• /
• pp.489-505
• /
• 2012

In this study, it is aim to perform the construction stage analysis of suspension bridges using time dependent material properties. Fatih Sultan Mehmet Suspension Bridge connecting the Europe and Asia in Istanbul is selected as an example. Finite element models of the bridge are modelled using SAP2000 program considering project drawing. Geometric nonlinearities are taken into consideration in the analysis using P-Delta large displacement criterion. The time dependent material strength variations and geometric variations are included in the analysis. Because of the fact that the bridge has steel structural system, only prestressing steel relaxation is considered as time dependent material properties. The structural behaviour of the bridge at different construction stages has been examined. Two different finite element analyses with and without construction stages are carried out and results are compared with each other. As analyses result, variation of the displacement and internal forces such as bending moment, axial forces and shear forces for bridge deck and towers are given with detail. It is seen that construction stage analysis has remarkable effect on the structural behaviour of the bridge.

• 한국전산구조공학회논문집
• /
• 제17권4호
• /
• pp.413-421
• /
• 2004

본 논문에서는 깊은 지하 500m에 처분된 가압경수로(PWR) 고준위폐기물 처분용기에 지하수압과 벤토나이트 팽윤압이 가해지는 동안 처분용기에 발생하는 크립변형을 예측하기 위하여 처분용기에 대한 구조해석을 수행하였다. 보통 이러한 크립변형은 처분용기에 추가적인 외력이 작용하지 않더라도 처분용기에 작용하는 압력과 내부의 높은 열에 의하여 발생될 수 있다. 처분용 기내부의 열분포의 복잡성 덴 시간의존성으로 인하여 일단 외부 지하수압 및 팽윤압만 고려하여 크립해석을 수행하였다. 이를 위하여 적당한 크립함수를 사용하였으며, 해석은 1억$(10^8)$초 동안 수행하였다. 해석결과 1억초 동안 발생하는 크립 변형률은 매우 작으며 주희 처분용기의 위아래 덮개에 발생함을 알 수 있었다. 그러나 처분용기의 구조강도에 중요한 내부 주철삽입물에는 훨씬 더 작은 미소한 변형률만 발생하여 처분용기에 발생하는 크립변형은 처분용기의 구조적인 안전성에는 큰 영향을 미치지 않음을 알 수 있었다. 해석 초기에 처분용기 내에 급격히 응력이 증가하여 최고치에 도달한 후 잠깐동안 이 응력 값을 유지하다가 그 이 후에는 급격히 응력 값이 감소하는 응력이완현상을 보이고 있기 때문에 발생 응력 측면에서도 전혀 처분용기의 구조적인 안전성에 문제가 없음이 확인되었다.

• 한국자기공명학회논문지
• /
• 제18권1호
• /
• pp.41-46
• /
• 2014

In order to obtain information on the structural geometry of $NH_4HSeO_4$ near the phase transition temperature, the spectrum and spin-lattice relaxation time in the rotating frame $T_{1{\rho}}$ for the ammonium and hydrogen-bond protons were investigated through $^1H$ MAS NMR. $T_{1{\rho}}$ for the hydrogen-bond protons abruptly decreased at high temperature and it is associated with the change in the structural geometry in $O-H{\cdots}O$ bonds. This mobility of the hydrogen-bond protons may be the main reason for the high conductivity.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.496-499
• /
• 2006

In this study, a practical method of shrinkage stress analysis on concrete slab in multi-story building is proposed, which considers both internal restraint and external restraint variation resulting from construction sequence. The shrinkage stress due to external restraint is obtained by multiplying relaxation coefficient to elastic shrinkage stress. The additional shrinkage stress due to internal restraint is obtained by residual strain of the elastic analysis. A verification example was analyzed and compared by the proposed method and commercial analysis program that is capable of time-dependent analysis of concrete. The results of 10-story example building show that the internal restraint of reinforcement increases the shrinkage stress considerably at the slabs under loose external restraint.

• 한국자기공명학회논문지
• /
• 제19권3호
• /
• pp.119-123
• /
• 2015

The thermodynamic properties and structural geometry of $KMgCl_3{\cdot}6H_2O$ were investigated using thermogravimetric analysis, differential scanning calorimetry, and nuclear magnetic resonance. The initial mass loss occurs around 351 K ($=T_d$), which is interpreted as the onset of partial thermal decomposition. Phase transition temperatures were found at 435 K ($=T_{C1}$) and 481 K ($=T_{C2}$). The temperature dependences of the spin-lattice relaxation time $T_1$ for the $^1H$ nucleus changes abruptly near $T_{C1}$. These changes are associated with changes in the geometry of the arrangement of octahedral water molecules.

• 전산구조공학
• /
• 제7권2호
• /
• pp.69-75
• /
• 1994

시간영역에서는 경계요소법을 이용하여 실제점탄성체에 대한 응력 및 변위 해석과정을 논의하였다. 기본해와 응력커널들은 탄성-점탄성 대응원리를 사용하여 구하였다. 이완함수는 지수함수들의 합으로 전개되고, 변형된 기본해와 응력커널들은 실제시간 공간으로 수치적인 방법에 의해 전환된다. 제안된 과정정은 수치해석을 수행하는데 큰 노력을 요하지 않으며, 실제점탄성체 해석에 응용될 수 있다. 예저의 결과들은 제시된 방법의 효율성과 응용 가능성을 보여준다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1997년도 가을 학술발표회 논문집
• /
• pp.134-141
• /
• 1997

A geometrically non-linear finite element formulation of spatial cable networks is presented using three cable elements. Firstly, derivation procedures of tangent stiffness and mass matrices for the space truss element and the elastic catenary cable element, and the isoparametric cable element are summarized. The load incremental method based on Newton-Raphson iteration method and the dynamic relaxation method are presented in order to determine the initial static state of cable nets subjected to self-weights and support motions. Furthermore, static non-linear analysis of cable structures under additional live loads are performed based on the initial configuration. Challenging example problems are presented and discussed in order to demonstrate the feasibility of the present finite element method and investigate static non-linear behaviors of cable nets.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.557-562
• /
• 2007

In order to analyze the PSC box-girder bridge by the cantilever construction method, three dimensional analysis method using the PSC shell clement is suggested. The time dependent material functions are based on the ACI and CEB code. The time dependent concrete material properties considered are changes in strength, elastic modulus, creep and shrinkage. For the prestressing tendon, relaxation effects are considered. Anchorage and friction loses during tendon installations are also included. The ACI and CEB material models for creep and elastic modulus are also included.

• 한국전산구조공학회논문집
• /
• 제14권3호
• /
• pp.309-315
• /
• 2001

탄성 반도체 칩과 점탄성 접착제층의 계면에 존재하는 모서리 균열에 대한 응력확대계수를 조사하였다. 이러한 균열들은 자유 경계면 부근에 존재하는 응력 특이성으로 인해 발생할 수 있다. 계면 응력상태를 해석하기 위해서 시간 영역 경계요소법이 사용되었다. 작은 크기의 모서리 균열에 대한 응력확대계수가 계산되었다. 점탄성 이완으로 인해 응력확대계수의 크기는 시간이 경과함에 따라 작아진다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2001년도 학술논문발표회
• /
• pp.118-123
• /
• 2001

The objectives of this research are to verify the structural stability and estimate the resisting performance of Stressed-Arch system during the construction process. Full scale models are taken to obtain the objective shape by the Dynamic Relaxation Method. As a result, it measured more strain than yielding strain at the extreme fiber of top chord member on the crown, but it is shown that members have the sufficiently compressive resisting performance as well as a considerable strain recovery capacity under unloading. Therefore, it is confirmed that Stressed-Arch system apparently have sufficient range of the structural capacity, but it is required that the elasto-plastic behavior of this system must be verified more detailed by numerical analysis and experiments.