• 제목/요약/키워드: structural inversion

검색결과 108건 처리시간 0.022초

반전 시간의 변화가 정상인의 뇌 체적에 미치는 영향에 대한 고찰 (A Study of Changes of Inversion Time Effect on Brain Volume of Normal Volunteers)

  • 김주호;김성후;신화선;김지은;나재범;박기수;최대섭
    • Investigative Magnetic Resonance Imaging
    • /
    • 제17권4호
    • /
    • pp.286-293
    • /
    • 2013
  • 목적 : 본 연구는 20대 건강한 성인을 대상으로 반전 시간 (inversion time, TI)의 차이에 의한 뇌 영상을 획득하여 체적을 분석하였다. 대상 및 방법 : 20대 건강한 성인을 대상으로 MPRAGE (magnetization prepared rapid acquisition gradient echo) pulse sequence, 절편두께 1.5 mm, 4개의 반전 시간 (800 ms, 900 ms, 1000 ms, 1100 ms)을 이용해 뇌 영상을 획득하였다. 획득된 뇌 영상을 이용해 백질 (white matter, WM), 회백질(gray matter, GM), 그리고 전체 뇌 체적(intracranial volume, ICV)을 측정하고 각 TI 별로 뇌 체적 및 성별에 따른 통계적인 차이가 있는지 분석하였다. 결과 : Freesurfer로 산출된 뇌 체적은 평균 ICV=$1278.94{\pm}154.92cm^3$를 이용하여 정규화 하였고, 평균 WM=$486.52{\pm}48.64cm^3$, 평균 GM=$646.83{\pm}57.12cm^3$ 이었다. 남자의 뇌 체적 (WM, GM, ICV)은 여자보다 컸다. 측정간 신뢰도 테스트에서 급내 상관 계수는 모두 높은 수치를 나타내었다 (WM 0.992, GM 0.988, ICV 0.997). 반복측정 분산분석에서는 GM과 ICV는 각 TI에서 유의수준 내에서의 차이가 없었지만 (GM p=0.143, ICV p=0.052) WM는 유의수준 내에서의 차이가 있었다 (p=0.001). 선형 구조 관계 분석에서는 피어슨 상관 계수가 모두 높은 수치를 보였다. 결론 : WM, GM, ICV는 높은 신뢰도와 선형 구조 관계를 나타내었고 WM는 각 TI에서 유의수준 내에서의 차이를 보였다. 20대 건강한 성인의 뇌 체적의 자료는 환자들과의 비교에 참고자료로 사용될 수 있을 것이며, 뇌의 구조적인 변화를 예측하는데 도움을 줄 것이다. TI의 변화에 따라 대조도, 잡음비 그리고 병변의 검출 능력을 조사하는 추가적인 연구가 필요할 것이다.

추계학적 지진동모델에 기반한 2D Q 토모그래피 수치모델 역산 (Numerical Test for the 2D Q Tomography Inversion Based on the Stochastic Ground-motion Model)

  • 연관희;서정희
    • 지구물리와물리탐사
    • /
    • 제10권3호
    • /
    • pp.191-202
    • /
    • 2007
  • 한반도 남부지역의 세부적인 지진파 감쇠특성 규명을 위해, 기존에는 적용이 불가능하였던 Q 토모그래피 역산을 위한 사전 수치검증 연구를 수행하였다. 특히 강지진동모사를 위해 일반적으로 사용되고 있는 추계학적 점지진원 지진동 모델(stochastic point-source ground-motion model; Boore, 2003)에서 사용되는 Q 값에 대한 2차원(2D; 2 Dimensional) 토모그래피 역산을 시도함으로써 역산 결과가 강지진동모사에 직접 활용될 수 있도록 하였다. 수치검증 방법으로는 Q 토모그래피 checkerboard 시험방법이 사용되었는데, 이를 위해 광역 단일 Q 모델의 추계학적 지진동모델 파라미터 역산결과의 지진원과 부지효과 모델 파라미터 값을 이용해서 관측자료와 지진규모-거리-주파수-오차 분포가 동일한 스펙트럼 합성자료를 생성하였다. 수치검증을 위한 Q 블록 격자의 총 개수는 75개(내륙지역=69개(약 $35{\times}44km^2$의 격자크기); 해양지역=6개)로 설정하였으며, $Q_0f^{\eta}$ 함수형태의 Q 블록 값은 $Q_0$=100, 500, ${\eta}=0.0{\sim}1.0$의 분포를 갖도록 하고, 파선의 깊이는 별도로 고려하지 않았다. 스펙트럼 합성자료 생성에 이용된 모델파라미터의 정해와 모델파라미터의 역산결과를 비교하기 위한 checkerboard 수치검증은 3단계에 걸쳐 수행되었는데, 1단계는 블록별 Q의 초기값 추정 단계이며, 2단계는 관측소별 부지증폭함수를 추정하는 단계, 마지막 3단계에서는 최종적인 Q를 도출하는 단계이다. 관측소별 부지증폭함수의 초기 추정값으로는 기 분류된 관측소 등급에 대한 평균 부지증폭함수(연관희, 서정희, 2007)가 사용되었으며, 3단계의 checkerboard 수치검증 결과 최종적으로 추정된 부지효과 모델에는 오차가 발생하였으나 블록별 Q의 정해는 만족할 정도로 추정할 수 있었다.

구조동역학-열탄성학 연성문제의 유한요소 정식화 및 분류 (The Finite Element Formulation and Its Classification of Dynamic Thermoelastic Problems of Solids)

  • Yun, Seong-Ho
    • 한국전산구조공학회논문집
    • /
    • 제13권1호
    • /
    • pp.37-49
    • /
    • 2000
  • 본 논문은 구조물의 동역학 및 열탄성 연성문제 해석을 위한 통합된 유한요소법을 개발하는데 초점을 두고있다. 첫째로, 열전도 방정식에 열변위라는 물리량을 도입하여 동역학의 운동 방정식과 유사하도록 유도한 후, 변분법과 일반좌표계를 이용하여 시간영역에서 정식화하였다. 둘째로, 두 방정식에 라플라스 변환을 동시에 도입하고, 공간변수만을 갖는 형상함수와 가중잔여법을 적용하여 유한요소식을 변환영역에서 표현하였다. 연성된 방정식을 문제의 특성에 따라서 분류하였고 정식화 과정을 검증하였다. 또한 수치해석 알고리듬이 갖는 수치 역 변환의 정성적인 경향에 대하여 검토하였다.

  • PDF

호주 북부 Victoria주 MT 탐사 자료의 2차원 해석 (Two-dimensional Analysis of MT Data across Northern Victoria, Australia)

  • 이성곤;이태종;;박인화;송윤호
    • 지구물리와물리탐사
    • /
    • 제13권4호
    • /
    • pp.407-415
    • /
    • 2010
  • 호주 Victoria주에서 2007년에 이어 2008년에도 한국, 호주, 일본의 공동연구로서 Victoria주 북부 지역에서 2차로 MT 탐사 자료를 획득하였다. 이 연구의 주 목적은 MT 탐사로부터 얻은 전기비저항 구조로부터 이 지역의 광상 및 화성 활동과 밀접하게 관련이 있을 것으로 생각되는 이 지역의 지구조 활동에 대한 이해를 높이고자 함이다. 탐사 지역은 호주 남동부의 Tasman 습곡대의 하나인 Lachlan 습곡대에 위치한다. 2008년의 MT 탐사 측선은 2007년도의 측선과 50 km 정도 북쪽으로 거의 나란하게 설계하였으며 획득된 자료에 대해 2차원 역산을 수행하고 지질 구조를 해석하였다. 2차원 역산 결과와 이 지역의 지질자료와 비교 해석한 결과 2007년의 MT자료 해석으로부터 확인된 고비저항 및 저비저항대의 공통적인 특징을 새로운 측선에서도 확인할 수 있었으며, 또한 이 지역의 대규모 단층대도 영상화할 수 있었다. 2차원 역산 결과 고비저항대 및 저비저항의 경계가 Stawell Zone과 Bendigo Zone, Bendigo Zone과 Melbourne Zone의 경계를 이루는 Avoca 단층 및 Heathcote 단층대와 정확히 일치하였으며, 또한 Bendigo Zone 내의 단층들이 사일루리아기의 횡압력에 의하여 생성되었음을 암시하는 listric 형태임을 보여주었다.

콘크리트 구조의 재료 물성 재구성을 위한 전기 임피던스 단층촬영 기법 (Electrical Impedance Tomography for Material Profile Reconstruction of Concrete Structures)

  • 정봉구;김보영;강준원;황진하
    • 한국전산구조공학회논문집
    • /
    • 제32권4호
    • /
    • pp.249-256
    • /
    • 2019
  • 이 논문은 재료의 전기 전도도 분포를 재구성하는 전기임피던스 단층이미지 기법(electrical impedance tomography; EIT)을 제시한다. 이 문제는 구조물 표면의 전극에서 측정된 전위와 계산된 전위의 차를 최소화하여 전기 전도도의 공간적 분포를 재구성하는 최적화 문제로 정의된다. 전류 입력 시 전위를 구하는 정해석 문제의 수학적 모델로서 완전전극모델(complete electrode model; CEM)을 사용하였다. 완전전극모델은 전기 포텐셜에 대한 라플라스 방정식과 전류 입력에 따른 경계조건들로 구성되는 경계값 문제이다. 완전전극모델 해의 정확성을 검증하기 위하여 유한요소법을 이용해 구한 원형 구조물의 전위해와 Technology Computer Aided Design(TCAD) 소프트웨어를 사용해 얻은 결과를 비교하였다. 완전전극모델의 지배방정식과 경계조건을 구속조건으로 하는 최적화 문제를 라그랑주 승수법(lagrange multiplier method)을 이용해 비구속 최적화 문제로 전환하고 라그랑지안의 1차 최적화 조건으로부터 전극에서의 전위 차를 최소화하는 최적의 전기전도도 분포를 도출하였다. 원형 균일영역의 전기 전도도 분포를 재구성하는 역해석 예제를 통해 완전전극모델 기반 EIT 프레임워크의 적용성을 검토하였다.

후쿠오카 지진('05. 3. 20, $M_{JMA}=7.0$)에 대한 일본 인근 지진관측소와 국내 지진관측소의 주파수응답특성 비교 (Site responses of Japanese stations near the epicenter and Korean stations for the Fukuoka earthquake)

  • 연관희;박동희;장천중;최원학;이대수
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2005년도 공동학술대회 논문집
    • /
    • pp.79-86
    • /
    • 2005
  • 2004년까지 국내에 축적된 지진파 스펙트럼 D/B를 기반으로 비교적 상세하게 추정된 국내 지진특성으로부터, 190km${\omega}^2$ 지진원모델에 개략적으로 근사되었으나, 2-corner 지진원모델의 특성을 보다 뚜렷하게 보여주었다. 또한 지진원 인근 지역 (R<100km) 일본 지진관측망(F-net, KiK-net 지중, Hi-net, K-net)별로 개략적인 지진원 스펙트럼을 추정하였으며, 국내 지진관측자료부터 추정된 지진원스펙트럼과 비교하였다. 비교 결과 KiK-net 지중 및 Hi-net 등의 심부시추공 관측자료로부터 추정된 지진원스펙트럼이 국내 지진파기저면 지진원스펙트럼과 $1Hz^{\sim}30Hz$에서 유사한 수준을 나타내었다. 이러한 결과로부터 한반도 주변 해상 지진에 대해 국내 지진관측자료만으로 추정한 지진원스펙트럼의 적합성 및 추정에 사용된 국내 지진파전달, 관측소응답 특성 등의 신뢰성을 입증할 수 있었다. 또한 지진원 인근 지역의 KiK-net 지중 및 Hi-net 관측소의 응답특성과 국내 지진파기저면 관측소응답특성이 유사함을 확인하였다.

  • PDF

Kinematic Interpretation for the Development of the Yeonghae Basin, Located at the Northeastern Part of the Yangsan Fault, Korea

  • Altaher, Zooelnon Abdelwahed;Park, Kiwoong;Kim, Young-Seog
    • 지질공학
    • /
    • 제32권4호
    • /
    • pp.467-482
    • /
    • 2022
  • The Yeonghae basin is located at the northeastern part of the Yangsan fault (YSF; a potentially active fault). The study of the architecture of the Yeonghae basin is important to understand the activity of the Yangsan fault system (YSFS) as well as the basin formation mechanism and the activity of the YSFS. For this study, Digital Elevation Model (DEM) was used to highlight the marginal faults, and structural fieldwork was performed to understand the geometry of the intra-basinal structures and the nature of the bounding faults. DEM analysis reveals that the eastern margin is bounded by the northern extension of the YSF whereas the western margin is bounded by two curvilinear sub-parallel faults; Baekseokri fault (BSF) and Gakri fault (GF). The field data indicate that the YSF is striking in the N-S direction, steeply dipping to the east, and experienced both sinistral and dextral strike-slip movements. Both the BSF and GF are characterized dominantly by an oblique right-lateral strike-slip movement. The stress indicators show that the maximum horizontal compressional stress was in NNE to NE and NNW-SSE, which is consistent with right-lateral and left-lateral movements of the YSFS, respectively. The plotted structural data show that the NE-SW is the predominant direction of the structural elements. This indicates that the basin and marginal faults are mainly controlled by the right-lateral strike-slip movements of the YSFS. Based on the structural architecture of the Yeonghae basin, the study area represents a contractional zone rather than an extensional zone in the present time. We proposed two models to explain the opening and developing mechanism of the Yeonghae basin. The first model is that the basin developed as an extensional pull-apart basin during the left-lateral movement of the YSF, which has been reactivated by tectonic inversion. In the second model, the basin was developed as an extensional zone at a dilational quadrant of an old tip zone of the northern segment of the YSF during the right-lateral movement stage. Later on, the basin has undergone a shortening stage due to the closing of the East Sea. The second model is supported by the major trend of the collected structural data, indicating predominant right-lateral movement. This study enables us to classify the Yeonghae basin as an inverted strike-slip basin. Moreover, two opposite strike-slip movement senses along the eastern marginal fault indicate multiple deformation stages along the Yangsan fault system developed along the eastern margin of the Korean peninsula.

A GN-based modified model for size-dependent coupled thermoelasticity analysis in nano scale, considering nonlocality in heat conduction and elasticity: An analytical solution for a nano beam with energy dissipation

  • Hosseini, Seyed Mahmoud
    • Structural Engineering and Mechanics
    • /
    • 제73권3호
    • /
    • pp.287-302
    • /
    • 2020
  • This investigation deals with a size-dependent coupled thermoelasticity analysis based on Green-Naghdi (GN) theory in nano scale using a new modified nonlocal model of heat conduction, which is based on the GN theory and nonlocal Eringen theory of elasticity. In the analysis based on the proposed model, the nonlocality is taken into account in both heat conduction and elasticity. The governing equations including the equations of motion and the energy balance equation are derived using the proposed model in a nano beam resonator. An analytical solution is proposed for the problem using the Laplace transform technique and Talbot technique for inversion to time domain. It is assumed that the nano beam is subjected to sinusoidal thermal shock loading, which is applied on the one of beam ends. The transient behaviors of fields' quantities such as lateral deflection and temperature are studied in detail. Also, the effects of small scale parameter on the dynamic behaviors of lateral deflection and temperature are obtained and assessed for the problem. The proposed GN-based model, analytical solution and data are verified and also compared with reported data obtained from GN coupled thermoelasticity analysis without considering the nonlocality in heat conduction in a nano beam.

2 -관능성 에폭시 수지 블렌드의 굴곡 특성과 열 안전성 (Flexural Properties and Thermal Stability of Bifunctional/Tetrafunctional Epoxy Blends)

  • 유희열;이재락;이종문
    • 한국재료학회지
    • /
    • 제4권1호
    • /
    • pp.75-80
    • /
    • 1994
  • 2-관능성 DGEBA-4-관능성 TGDDM 블렌드를 DDM으로 경화시킨 경호물의 굴곡 특성과 열 안정성을 혼합비에 대하여 조사하였다. 굴곡 탄성율과 유리 전이 온도는 TGDDM이 증가 될수록 증대되었고, 20-40 중량%의 TGDDM조성에서 불연속적으로 변화하는데, 이것은 이 저성 부근에서 ductile/brittle의 구조적 상변화가 일어나고 있기 때문인 것으로 추정된다. TGDDM성분이 증가될수록 최대 열분해 온도는 고온쪽으로 shift되는 경향을 보이지만, 분해에 대한 활성화 에너지는 오히려 감소했다.

  • PDF