• Structural Engineering and Mechanics
• /
• v.48 no.1
• /
• pp.103-124
• /
• 2013

This paper studies the static and dynamic characteristics of composite plates subjected to an arbitrary periodic load in hygrothermal environments. The material properties of composite plates are depended on the temperature and moisture. The governing equations of motion of Mathieu-type are established by using the Galerkin method with reduced eigenfunction transforms. A periodic load is taken to be a combination of axial pulsating load and bending stress in the example problem. The regions of dynamic instability of laminated composite plates are determined by solving the eigenvalue problems based on Bolotin's method. The effects of temperature rise and moisture concentration on the dynamic instability of laminated composite plates are investigated and discussed. The influences of various parameters on the instability region and dynamic instability index are also investigated. The numerical results reveal that the influences of hygrothermal effect on the dynamic instability of laminated plates are significant.

• Architectural research
• /
• v.10 no.1
• /
• pp.25-32
• /
• 2008

Stability is a very important part which we must consider in structural design. In this paper, we take advantage of finite element method to study parametrical instability of lattice dome structures, which is subjected to harmonically pulsating load. We consider elastic stiffness and geometrical stiffness simultaneously during the calculation of stiffness matrix, and adopt consistent mass matrix to make the solution more correct. In order to obtain instability regions, we represent displacements and accelerations in dynamic equation by trigonometric series expansions, and then obtain Hill's infinite determinants. After first order approximation, we can get first and second order dynamic instability regions eventually. Finally, we take 24-bar star dome and 90-bar lamella dome as examples to investigate dynamic instability phenomena.

• Structural Engineering and Mechanics
• /
• v.65 no.1
• /
• pp.91-98
• /
• 2018

Three structure-dependent integration methods with no numerical dissipation have been successfully developed for time integration. Although these three integration methods generally have the same numerical properties, such as unconditional stability, second-order accuracy, explicit formulation, no overshoot and no numerical damping, there still exist some different numerical properties. It is found that TLM can only have unconditional stability for linear elastic and stiffness softening systems for zero viscous damping while for nonzero viscous damping it only has unconditional stability for linear elastic systems. Whereas, both CEM and CRM can have unconditional stability for linear elastic and stiffness softening systems for both zero and nonzero viscous damping. However, the most significantly different property among the three integration methods is a weak instability. In fact, both CRM and TLM have a weak instability, which will lead to an adverse overshoot or even a numerical instability in the high frequency responses to nonzero initial conditions. Whereas, CEM possesses no such an adverse weak instability. As a result, the performance of CEM is much better than for CRM and TLM. Notice that a weak instability property of CRM and TLM might severely limit its practical applications.

• Structural Engineering and Mechanics
• /
• v.3 no.3
• /
• pp.229-244
• /
• 1995

The parametric instability behaviour of a plate subjected to localized in-plane compressive or tensile periodic edge loading is studied, considering the effects of damping into the system. Different edge loading cases have been considered. Damping has been introduced in the form of proportional damping. Dynamic instability behaviour under compressive or tensile periodic edge loading shows that the instability regions are influenced by the load band width and its location on the edge. The effects of damping on the instability regions show that there is a critical value of dynamic load factor beyond which the plate becomes dynamically unstable. The critical dynamic load factor increases as damping increases. Damping generally reduces the widths of the instability regions.

• Wind and Structures
• /
• v.10 no.1
• /
• pp.61-82
• /
• 2007

This paper presents a novel finite element (FE) model for analyzing coupled flutter of long-span bridges using the commercial FE package ANSYS. This model utilizes a specific user-defined element Matrix27 in ANSYS to model the aeroelastic forces acting on the bridge, wherein the stiffness and damping matrices are expressed in terms of the reduced wind velocity and flutter derivatives. Making use of this FE model, damped complex eigenvalue analysis is carried out to determine the complex eigenvalues, of which the real part is the logarithm decay rate and the imaginary part is the damped vibration frequency. The condition for onset of flutter instability becomes that, at a certain wind velocity, the structural system incorporating fictitious Matrix27 elements has a complex eigenvalue with zero or near-zero real part, with the imaginary part of this eigenvalue being the flutter frequency. Case studies are provided to validate the developed procedure as well as to demonstrate the flutter analysis of cable-supported bridges using ANSYS. The proposed method enables the bridge designers and engineering practitioners to analyze flutter instability by using the commercial FE package ANSYS.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.04a
• /
• pp.69-76
• /
• 2003

We investigate the fundamental mechanisms of the dynamic instability when the sinusoidal shaped arch structures subjected to sinusoidal harmonic excitation with pin-ends. In nonlinear dynamics, examining the characteristics of attractor on the phase plane and investigating the dynamic buckling process are very important thing for understanding why unstable phenomena are sensitively originated by various initial conditions. In this study, the direct and the indirect snap-buckling of shallow arches considering geometrical nonlinearity are investigated numerically and compared with the step excitation critical load.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1998.10a
• /
• pp.233-242
• /
• 1998

Many papers which deal with the dynamic instability for shell-like structures under the step load have been published, but there are few papers which treat the essential phenomenon of the dynamic buckling using the phase plane for investigating occurrence of chaos. Dynamic buckling process in the phase plane is a very important thing for understanding why unstable phenomena are sensitively originated in nonlinear dynamics by various initial conditions. In this study, the direct and the indirect snap-buckling of shallow arches considering geometrical nonlinearity are investigated numerically and compared with the static critical load.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.10a
• /
• pp.153-160
• /
• 2002

Based on a generalized variational principle for magneto-thermo-elasticity, a theoretical model is proposed to describe the coupled magneto-thermo-elastic interaction in soft ferromagnetic plates. Using the linearized theory of magneto-elasticity and perturbation technique, we analyze the magneto-elastic and magneto-thermo- elastic instability of simply supported ferromagnetic plates subjected to thermal and magnetic fields. A nonlinear finite element procedure is developed next to simulate the magneto-thermo-elastic behavior of a finite-size ferromagnetic plates. The effects of thermal and magnetic fields on the magneto-thermo-elastic bending and buckling is investigated in some detail.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.10a
• /
• pp.185-192
• /
• 2002

In this study, we choose the sinusoidal shaped arch with pin-ends subjected to sinusoidal distributed excitation to investigate the fundamental mechanism of the dynamic instability. We derive the nonlinear equations of motion to investigate the instability phenomenon of arch structures and Identify the buckling characteristics of sinusoidal shaped arch structures through the nonlinear eigenvalue analysis with discreted equations of motion by Galerkin's method. We examine that phenomenons which direct snapping and indirect snapping with backbone curves to understand occurrence paths of the dynamic buckling.

• Journal of the Korean Society of Physical Medicine
• /
• v.2 no.2
• /
• pp.219-228
• /
• 2007

Objective : The purpose of this study was conducted to find treatment of forward head posture and shoulder instability with proprioceptive neuromuscular facilitation concept. Methods : This is literature study with books, seminar note and international course. Results : Forward head posture and shoulder instability has related each other. Forward head posture will make muscle instability, weakness and stiffness on neck and shoulder girdle. It will make pain also. Important muscle are suboccipital muscle, omohyoid muscle, sternoclaidomastoid muscle, scaleni, pectoralis minor, levator scapular and digastric. Conclusion : Treatment of the forward head posture and shoulder instability is provided. It is that treatment of stiff muscle with eccentric muscle work, muscle elongation, muscle strengthening at the structure level and at the functional level for daily activities.