• Journal of Welding and Joining
• /
• 제33권1호
• /
• pp.35-40
• /
• 2015

Recently, there have been the increase of ship size and the development of oil and gas in arctic region. These trends have led to the requirements such as high strength, good toughness at low temperature and good weldability for prevent of brittle fracture at service temperature. There has been the key issue of crack arrestability in large size structure such as container ship. In this report for the first time, crack arrest toughness of thick steel plate welds was evaluated by large scale ESSO test for estimate of brittle crack arrestability in thick steel plate. For large structures using thick steel plates, fracture toughness of welded joint is an important factor to obtain structural integrity. In general, there are two kinds of design concepts based on fracture toughness: crack initiation and crack arrest. So far, when steel structures such as buildings, bridges and ships were manufactured using thick steel plates (max. 80~100mm in thickness), they had to be designed in order to avoid crack initiation, especially in welded joint. However, crack arrest design has been considered as a second line of defense and applied to limited industries like pipelines and nuclear power plants. Although welded joint is the weakest part to brittle fracture, there are few results to investigate crack arrest toughness of welded joint. In this study, brittle crack arrest designs were developed for hatch side coaming of large container ships using arrest weld, hole, and insert technology.

• 한국소음진동공학회논문집
• /
• 제15권12호
• /
• pp.1370-1377
• /
• 2005

The bottom structure of an instrumented capsule is a part which is joined at the receptacle of the flow tube in the reactor in-core. A geometrical change of the bottom structure has an effect on the pressure drop and the vibration of the capsule. The out-pile test to evaluate the structural integrity of the material capsule called 04M-17U was performed by using a single channel and a half core test loop. From the pressure drop test, the optimized diameter of the cone shape's bottom structure which satisfies HANARO's flow requirement (19.6 kg/s) is 71 mm. The maximum displacement of the capsule measured at the half core test loop is lower than 1.0 mm. From the analysis results, it is found that the test hole will not be interfered with near the flow tubes because its displacement due to the cooling water is very small at 0.072 mm. The fundamental frequency of the capsule under water is 9.64 Hz. It is expected that the resonance between the capsule and the fluid flow due to the cooling water in HANARO's in-core will not occur. Also, the new bottom structure of a solid cone shape with 71 mm in diameter will be applicable to the material and special capsules in the future.

• Steel and Composite Structures
• /
• 제1권1호
• /
• pp.17-32
• /
• 2001

The Rosette-joining system is a completely new press-joining method for cold-formed steel structures. One Rosette-joint has a shear capacity equal to that of approximately four screws or rivets. The Rosette thin-walled steel truss system presents a new fully integrated prefabricated alternative to light-weight roof truss structures. The trusses are built up on special industrial production lines from modified top hat sections used as top and bottom chords and channel sections used as webs which are joined together with the Rosette press-joining technique to form a completed structure easy to transport and install. A single web section is used when sufficient but can be strengthened by double-nesting two separate sections or by using two lateral profiles where greater compressive axial forces are met. An individual joint in the truss can be strengthened by introducing a hollow bolt into the joint hole. The bolt gives the connection capacity a boost of approximately 20%. A series of laboratory tests have been carried out in order to verify the Rosette truss system in practice. In addition to compression tests on individual sections of different lengths, tests have also been done on small structural assemblies and on actual full-scale trusses of a span of 10 metres. Design calculations have been performed on selected roof truss geometries based on the test results, FE-analysis and on the Eurocode 3 and U.S.(AISI) design codes.

• 한국융합학회논문지
• /
• 제8권7호
• /
• pp.231-236
• /
• 2017

본 연구에서는 고분자재료인 CFRP(Carbon Fiber Reinforced Plastic)과 구조용 금속인 SM45C로 이루어진 이종 복합재료가 경량화 재료용으로 사용되고 있다. SM45C를 심재로 갖고 양면에 섬유 적층각도가 다른 단반향 CFRP를 접착시킨 샌드위치형 복합재료를 이용하여 CT(Compact Tension)시험을 기초로 한 유한요소 해석을 진행하였다. CT시험은 하중을 받는 재료내의 크랙으로 인한 파괴거동을 확인하기 위한 대표적인 방법이다. 이종 복합재료를 기계 구조물에 적용하기 위해서는 크랙 및 구멍에 대한 영향을 연구하여야 한다. 샌드위치형 복합재료의 CT시험에 의한 파괴거동을 시뮬레이션 해석으로 연구하였다. 본 연구 결과로서, [0/60/-60/0]의 적층각도를 가진 단방향 CFRP 샌드위치형태 복합재료가 우수한 강도를 갖으며 최대 등가응력은 약 182GPa정도가 나타났다. 또한 복합 재료 형상으로서의 디자인적 요소를 융합 기술에 접목함으로서 그 미적인 감각을 나타낼 수 있다.

• 한국산학기술학회논문지
• /
• 제15권10호
• /
• pp.5974-5979
• /
• 2014

압입 방식으로서 경량화된 부품이 매우 균질한 정밀도로 생산이 되며 프레스의 기술이 향상되고 있다. 압입 방식으로 조립하였을 시 핀과 구멍사이에는 압축력에 의한 변형력이 발생되고 접촉면이 손상을 입는다. 따라서 본 연구에서는 CATIA 프로그램을 이용하여 3D 모델링하였으며, ANSYS 프로그램을 통하여 압입 접촉된 평면에서 손상평가를 하였다. 해석결과, 핀이 들어갈 때 PCB판에 작용하는 하중은 약 21.3N인 것으로 확인되었으며, PCB판이 Pin에서 빠져나올 때의 하중은 약 19.24N으로 나타났다. 또한 구조 해석결과, Pin 1이 본 연구 모델의 모든 부품들 중에서 가장 최대응력이 많이 발생하므로, 대표적으로 Pin 1의 최대 등가응력이 192.96MPa로 나타났다. 압입 접촉 손상 특성을 규명하고 본 연구결과를 실제의 압입 공정의 설계에 응용함으로서 그 파손을 방지하고 내구성을 평가할 수 있다고 사료된다.

• Journal of Welding and Joining
• /
• 제27권6호
• /
• pp.80-86
• /
• 2009

The Cu-bearing PFS-700 steel which has yield strength over 700 MPa was developed to replace the existing submarine structural material, HY-100. The PFS-700 steel has a combination of good mechanical properties and superior weldability. Becaus of that, it can be welded without pre-heating. The application of PFS-700 steel to submarine or battle ship will give a great reduction of cost by omitting pre-heating or lowering pre-heat temperature. To develop pre-heating free welding consumables that match and take advantage of PFS-700 steel, new welding consumables have been designed for the GMAW, SAW processes and explosion bulge test(EBT) was conducted to see the reliability of welded structure. All welds were made without pre-heating, and the inter-pass temperature was below $50^{\circ}C$ for SAW50 and $150^{\circ}C$ for GMAW and SAW150. All EBT specimens show over 14% thickness reduction without through-thickness crack or crack propagation to the hole-down area. Tensile properties for all welding conditions show higher(GMAW) or similar values(SAW50, SAW150) to the base metal. Charpy impact values for the weld metal also show 163.5J(GMAW), 95.4J(SAW50) and 69.0J(SAW150), which meet the goal(higher than 50J) of this project.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.782-787
• /
• 2005

The bottom structure of an instrumented capsule is a part which is joined at the receptacle of the flow tube in the reactor in-core. A geometrical change or the bottom structure has an effect on the pressure drop and the vibration of the capsule. The out-pile test to evaluate the structural Integrity of the material capsule called 04M-l7U was performed by using a single channel and a half core test loop. From the pressure drop test, the optimized diameter of the cone shape's bottom structure which satisfies HANARO's flow requirement (19 6 kg/s) is 71 mm. The maximum displacement of the capsule measured at the half core test loop is lower than 1.0 mm. From the analysis results, it is found that the test hole will not be interfered with near the flow tubes because its displacement due to the cooling water is very small at 0.072 mm. The fundamental frequency of the capsule under water is 9.64 Hz. It is expected that the resonance between the capsule and the fluid flow due to the cooling water in HANARO's In-core will not occur. Also, the new bottom structure of a solid cone shape with 71 mm in diameter will be applicable to the material and special capsules in the future.

• World Technopolis Review
• /
• 제1권4호
• /
• pp.276-286
• /
• 2013

"Federal investments into the future of a region" - pushing economy in the right direction or throwing tax money into a black hole? Hot-headed contentions keep circulating within politics and economy discussing the effect of technology centers and their sustainability within a region. Start-up support and technological infrastructure with the auxiliary service of well developed sector-oriented clusters as a fertile soil for successful networks are an undeniable advantage of well organised technology centers. Sceptic contemporaries still hold against that in order to implement such a center millions of federal funds for infrastructure and operation are invested. What output of this tax money is verifiable in the long run? The case of Dortmund provides substantial food for this necessary and relevant discussion. Now, after 27 years of history of the TechnologieZentrumDortmund, TZDO for short, a positive balance can be drawn. This is not just a matter of personal belief and stance. Fortunately, a recent study on the economic effects of the TZDO on the whole region was performed by the Center of Applied Economy Research M$\ddot{u}$nster, Germany (Gundel and Luttmann 2008). The result is clear and measurable: the TZDO has shown to be of great impact on the positive development of a whole region. This paper presents an account of the approach of the TechnologieZentrumDortmund and its current strategy and mode of operation to reach an utmost of effectiveness of personal and pecuniary input in establishing economic success for the region of Dortmund. An immense change of minds, employment opportunities and a massive structural change of the whole region were some of the ambitious aims that had to be reached and that are achieved to a large extent.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.210-210
• /
• 2010

ABO2 형태를 가진 delafossite 구조 산화물은 p-type 투명전도체 소재로 유명하다. Delafossite 구조가 p-type 투명전도체에 적합한 결정적인 이유는 밴드갭이 넓고 공유결합에 유리하기 때문이다. 투명전도체는 가시광선의 흡수가 없도록 band gap을 넓히는 것이 우선인데 이러한 band gap이 넓은 구조가 delafossite이다. 또한 delafossite 구조는 구조적으로 각각의 산화물 이온들이 유사 사면체 배위(pseudo-tetrahedral coordination)을 갖는다. 이러한 사면체 배위결합구조에서 산소이온은 비결합면이 없기 때문에 더욱더 공유결합성을 향상시킬 것으로 생각된다. 여기서 A는 +1가 cation, B은 +3가 cation으로 구성되어 있다. A자리에는 1가 원소인 팔라듐, 플래티늄, 은, 구리 등을 가질 수 있고. B자리에 3가 원소이면서도 크기가 알루미늄보다는 크고 란타늄보다는 작은 금속이 들어갈 수 있다. Delafossite 구조는 상온에서 2종류의 polytype (상온에서 Rhombohedaral 구조와 hexagonal 구조)이 존재하며 이들은 각각 3R(Rm) 및2H (P63/mmc)의 결정 구조를 가지고 있다. CuCrO2는 일반적으로 3R결정구조를 가지는 것으로 알려져 있다. delafossite 구조는 전기적 이방성을 띄고 있는데 c-축 방향으로의 전기적 특성이 a-축 방향으로의 전기적 특성보다 약 1000배 높은 물성을 띈다고 한다. 이는 c-축 방향의 원자 위치 때문인데 CuCrO2의 경우 Cu-O-Cr-O-Cu로서 3d-2p-3d-2p-3d 궤도를 가지기 때문인 것으로 알려져 있다.[ref] 반면 c-축으로 에피성장된 박막의 경우 +3가 이온이 위치한 layer에서 hole hopping에 의해 캐리어가 전도된다고 알려져 있기도 하다. 본 연구에서는 PLD를 이용하여 c-plane 사파이어 기판위에 성장된 delafossite구조인 CuCrO2박막의 특성을 알아보았다. p-type 특성을 위하여 CuCrO2에 Ni를 첨가하였으며 그에 따른 구조적 전기적 특성을 조사하였다. 성장온도와 도핑농도를 변화시켜 특성을 연구하였다. 결정구조적 특성과 전기적 특성을 분석하려 한다.

• 반도체디스플레이기술학회지
• /
• 제9권3호
• /
• pp.53-58
• /
• 2010

In this study, we have investigated the effect of the ambient gases on the characteristics of IZO thin films for the OLED (organic light emitting diodes) devices. For this purpose, IZO thin films were deposited by RF magnetron sputtering under various ambient gases (Ar, $Ar+O_2$ and $Ar+H_2$) at $150^{\circ}C$. In order to investigate the influences of the oxygen and hydrogen, the flow rate of oxygen and hydrogen in argon mixing gas has been changed from 0.1sccm to 0.5sccm, respectively. All the samples show amorphous structure regardless of ambient gases. The electrical resistivity of IZO film increased with increasing flow rate of $O_2$ under $Ar+O_2$ while under $Ar+H_2$ atmosphere the electrical resistivity showed minimum value near 0.5sccm of $H_2$. All the films showed the average transmittance over 85% in the visible range. The OLED device was fabricated with different IZO substrates made by configuration of IZO/${\alpha}$-NPD/DPVB/$Alq_3$/LiF/Al to elucidate the performance of IZO substrate. OLED devices with the amorphous-IZO (a-IZO) anode film show better current densityvoltage-luminance characteristics than that of OLED devices with the commercial crystalline-ITO (c-ITO) anode film. It can be explained that very flat surface roughness and high work function of a-IZO anode film lead to more efficient hole injection by reduction of interface barrier height between anode and organic layers. This suggests that a-IZO film is a promising anode materials substituting conventional c-ITO anode in OLED devices.