• 한국농공학회지
• /
• 제45권4호
• /
• pp.98-106
• /
• 2003

In order to set up structural improvement strategy against meteorological disasters of the shading structures in ginseng fields, structural safety analyses as well as some case studies of structural damage patterns were carried out. According to the results of structural safety analysis, allowable safe snow depth for type B(wood frame with single span) was 25.9 cm, and those for type A(wood frame with multi span) and type C and D (steel frame with multi span) were 17.6 cm, 25.8 cm, and 20.0 cm respectively. So types of shading structures should be selected according to the regional design snow depth. An experiential example study on meteorological disasters indicated that a strong wind damage was experienced once every 20 years, and a heavy snow damage once every 9.5 years. The most serious disasters were caused by heavy snow and it was found that a half break and complete collapse of structures were experienced by about 70% of snow damage. In addition to maintenance, repair and reinforcement, it is also recommended that improved model of shading structures for ginseng cultivation should be developed as a long term countermeasures against meteorological disasters.

• 한국CDE학회논문집
• /
• 제10권1호
• /
• pp.17-26
• /
• 2005

In-line skate generally consists of four major parts: boot, frame, bearing and wheel, and the most important part among those for necessary functionality is the frame. It is the most expensive, and it also makes a decisive role in practical race skating. The functional behavior of a frame is greatly affected by external dynamic forces as well as the static weight of a skater. We are proposing a new inline speed-skating frame design that has been improved in structural strength and weight for providing optimum speed in $20\sim40km$ marathon skating.

• 한국건축시공학회지
• /
• 제11권3호
• /
• pp.301-309
• /
• 2011

현재 국내 주택의 근간을 이루는 내력벽식 공동주택은 구조적 한계로 인해 단수명화되고 있다. 이로 인해 발생하는 재건축은 막대한 자원 및 에너지 소비와 건설폐기물로 인한 환경오염을 유발하고 있다. 정부는 이러한 문제 해결의 방안으로 리모델링이 가능한 라멘구조를 유도하는 인센티브 제도를 시행하고 있다. 따라서 새로운 개념을 적용한 라멘구조의 공동주택을 위하여 개발된 복합PC구조인 Green Frame은 내력벽식 및 기존 라멘조식 공동주택이 리모 델링이 어렵다는 단점을 개선할 수 있을 뿐만 아니라 공사기간 단축이 가능할 것이다. 그러므로 본 연구에서는 Green Frame의 특성과 절대공기를 분석하고, 구조별 공동주택의 골조공사 공기와 비교 분석하여 차이점을 규명하였다. 그 결과 Green Frame을 공동주택에 적용할 경우 공기단축이 가능한 것으로 나타났다. 따라서 건설공사에서 공기는 매우 중요한 요소로 향후 성공적인 공동주택의 사업을 위해서 중요한 핵심기술로서의 역할을 할 수 있을 것으로 사료된다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1994년도 봄 학술발표회 논문집
• /
• pp.38-45
• /
• 1994

The general conceptual constitution of structural optimization is formulated. The algorithm using the gradient projection method and design sensitivity analysis is discussed. Examples of minimum-weight design for six-story steel plane frame are taken to illustrate the application of this algorithm. The advantages of this algorithm such as marginal cost and design sensitivity analysis as well as system analysis are explained.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1993년도 가을 학술발표회논문집
• /
• pp.131-138
• /
• 1993

To analysis machanical behavior for RC frame under monotonic & Cyclic load, it is needed to investigate elasto-plastic behavior for steel & concrete. Therefore, in this study, we idealized material model(steel and concrete) to take into account elasto-plastic, limit state, and developed structural analysis program that consider complex non-linearity. We investigated simple beam and portal frame under cyclic & monotonic loading, so we confirmed the propriety.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1992년도 가을 학술발표회 논문집
• /
• pp.121-126
• /
• 1992

This Paper presents a development of a CAD system for interactive design of steel frames. The adopted building code for structural design is "Steel Building Codes" enacted by the Architectural Institute of Korea in 1973. The selected member sections, therefore, are domestic rolled sections - especially, H shapes. The authors aim at a development of an integrated computer programs repeating plane frame analysis and design of members until minimum weight design condition is satisfied. This program also provides various section change functions to improve the shortcomings of automatic design.ic design.

• 에너지공학
• /
• 제24권4호
• /
• pp.71-80
• /
• 2015

PVC 프레임의 취약한 강도를 보완하기 위해 사용되는 철재 보강재는 상대적으로 높은 열전도 특성으로 인해 PVC 프레임의 전체적인 열 성능을 떨어뜨리는 역할을 한다. 본 연구는 철재 보강재의 타공을 통해 표면적을 줄임으로서 전열 면적의 감소를 통한 열저항 특성을 개선하고, 감소된 만큼 두께를 높임으로서 타공으로 인한 강도 저하를 보완하였다. 이에 대한 성능을 평가하기 위해 PVC frame, PVC frame + original steel stiffener, PVC frame + 30% perforated steel stiffener, PVC frame + 50% perforated steel stiffener, PVC frame + 65% perforated steel stiffener 등 5개의 시험체를 구성하였으며, 시험 방법은 수식과 시뮬레이션에 의한 방법을 적용하였다. 시험 결과 PVC frame + 65% perforated steel stiffener이 열저항 특성과 강도특성에서 가장 높은 것으로 평가되었다.

• 전산구조공학
• /
• 제10권4호
• /
• pp.165-175
• /
• 1997

본 연구에서는 현재 자동차구조에 사용되고 있는 점용접 보강 리어사이드 프레임, 비보강 리어사이드 프레임 및 레이저 용접을 이용한 이종두께 리어사이드 프레임의 응력, 좌굴 및 진동해석이 수행되었다. 응력 및 진동해석의 경계조건은 양단고정이며, 좌굴해석시에는 단순지지 경계조건을 사용하였다. 구조해석에는 ANSYS 5.0 Code를 사용하였다. 점용접된 리어사이드 프레임의 최대응력은 메인프레임에서 발생하였으며, 그값은 80.9MPa이다. 이때의 최대변형률은 501.mu.이다. 이종두께 레이저 용접된 리어사이드 프레임은 두께가 1.8mm일 때 점용접 보강 리어사이드 프레임의 최대응력과 같아진다. 따라서 동일등가 응력을 기준으로 할 때 레이저 용접을 이용하면 중량을 17.2% 줄일 수 있다. 양단 단순지지된 보강 점용접 리어사이드 프레임의 좌굴하중은 52.54kN이다. 이때 동일한 좌굴하중을 갖는 이종두께 레이저 프레임의 두께는 1.9mm이다. 따라서 중량을 15% 감소시킬 수 있다. 보강된 점용접 리어사이드 프레임의 고유진동수는 163.6Hz로 굽힘모드이며, 이종두께 레이저 용접 리어사이드 프레임의 고유진동수는 179.8Hz이다.

• Structural Engineering and Mechanics
• /
• 제46권2호
• /
• pp.213-229
• /
• 2013

Although performance based assessment procedures are mainly developed for reinforced concrete and steel buildings, URM (Unreinforced Masonry) buildings occupy significant portion of buildings in earthquake prone areas of the world as well as in IRAN. Variability of material properties, non-engineered nature of the construction and difficulties in structural analysis of masonry walls make analysis of URM buildings challenging. Despite sophisticated finite element models satisfy the modeling requirements, extensive experimental data for definition of material behavior and high computational resources are needed. Recently, nonlinear equivalent frame models which are developed assigning lumped plastic hinges to isotropic and homogenous equivalent frame elements are used for nonlinear modeling of URM buildings. The equivalent frame models are not novel for the analysis of masonry structures, but the actual potentialities have not yet been completely studied, particularly for non-linear applications. In the present paper an effective tool for the non-linear static analysis of 2D masonry walls is presented. The work presented in this study is about performance assessment of unreinforced brick masonry buildings through nonlinear equivalent frame modeling technique. Reliability of the proposed models is tested with a reversed cyclic experiment conducted on a full scale, two-story URM building at the University of Pavia. The pushover curves were found to provide good agreement with the experimental backbone curves. Furthermore, the results of analysis show that EFM (Equivalent Frame Model) with Dolce RO (rigid offset zone) and shell element have good agreement with finite element software and experimental results.

• 한국철도학회논문집
• /
• 제2권2호
• /
• pp.31-38
• /
• 1999

Two representative types of the AGT (Automated Guideway Transit) system, which are bogie and steering types, are available for the side-guided system. Each system primarily consists of the bogie frame, suspensions, wheelsets and axles, braking system and transmission system. Among these components, the bogie frame is one of the most significant components subjected to the whole vehicle and passenger loads. This paper describes structural analyses and associated fatigue analyses for each bogie frame depending on the various loading conditions on a basis of the railway vehicle code UIC 515-4. Subsequently, comparisons are made between those two types to estimate which type is more reliable in terms of strength and fatigue. It is observed that the bogie type is a little advantageous over the steering one from the strength analysis. However, the two types are found to be in a reliable range of fatigue even though a realistic fatigue load case is further carried out. In addition, an optimal size of thickness is suggested for designs of the bogie frame.