• 한국구조물진단유지관리공학회 논문집
• /
• 제6권1호
• /
• pp.111-118
• /
• 2002

Currently, the inspection of bridges is conduced for the parts or elements of a bridges and the results of inspection are depicted for those local elements. Therefore, the representative rating of a bridge as a whole bridge system is not presented. The purpose of the present study is to purpose a reasonable method which can yield realistic representative rating for an actual bridge. The purpose method consists of two steps, i.e, visual inspection step and safety assessment step. The importance of members is considered by introducing the weighting factors and the number of spans is also considered to obtain the representative rating of a whole bridge system. The purpose method may be efficiently used to calculate the realistic representative rating bridge structures.

• 한국구조물진단유지관리공학회 논문집
• /
• 제13권5호통권57호
• /
• pp.101-108
• /
• 2009

비파괴 시험을 이용한 RC 구조물의 진단에 있어서 비파괴 측정값의 적절한 해석을 통해서만 현 구조물의 상태진단이 가능하다. 보다 정확한 구조물의 상태진단은 비파괴 시험의 정밀성, 변이성 등과 같은 여러 가지 요소에 의하여 좌우된다. 특히 비파괴 시험을 이용한 측정값과 구조물의 상태에 있어서의 불확실성은 정밀한 상태진단에 큰 영향을 미친다. 본 논문은 현재 사용이 증가되고 있는 비파괴 장비의 올바른 선택과 정확한 구조물의 진단을 위하여, 비파괴 측정값의 확률적 해석법의 기초를 제공하고 있다.

• Structural Engineering and Mechanics
• /
• 제89권6호
• /
• pp.627-634
• /
• 2024

This research deals with the process of conducting a reinforced concrete slab loading test of a Residential Complex Project at the Shatt Al Arab District which is located in southern Iraq. The purpose of the test which represents a destructive test is to evaluate the structural behavior of the slab condition state during and after the examination of the test process in order to ascertain the ability of the slab ceiling to withstand the loads generated during the use of the building. The test was carried out accordant to ACI 437.2-13 code. The reason for this test is the postponed 8 years of building project construction. Concrete blocks were used to simulate and conduct a loading test of 30-tons for 3 days. The central point has been installed to measure the slab deflection that occurred during the test. The results showed that both the total deflection and residual deflections were lesser than the permissible values according to the ACI 437.2-13, the RC slab behavior was mainly linear structural behave, and that the purpose of the examination was achieved. Finally, a new method was introduced to the assessment of the slab condition at the support which is found in good condition.

• Smart Structures and Systems
• /
• 제24권5호
• /
• pp.567-585
• /
• 2019

In the past two decades, structural health monitoring (SHM) systems have been widely installed on various civil infrastructures for the tracking of the state of their structural health and the detection of structural damage or abnormality, through long-term monitoring of environmental conditions as well as structural loadings and responses. In an SHM system, there are plenty of sensors to acquire a huge number of monitoring data, which can factually reflect the in-service condition of the target structure. In order to bridge the gap between SHM and structural maintenance and management (SMM), it is necessary to employ advanced data processing methods to convert the original multi-source heterogeneous field monitoring data into different types of specific physical indicators in order to make effective decisions regarding inspection, maintenance and management. Conventional approaches to data analysis are confronted with challenges from environmental noise, the volume of measurement data, the complexity of computation, etc., and they severely constrain the pervasive application of SHM technology. In recent years, with the rapid progress of computing hardware and image acquisition equipment, the deep learning-based data processing approach offers a new channel for excavating the massive data from an SHM system, towards autonomous, accurate and robust processing of the monitoring data. Many researchers from the SHM community have made efforts to explore the applications of deep learning-based approaches for structural damage detection and structural condition assessment. This paper gives a review on the deep learning-based SHM of civil infrastructures with the main content, including a brief summary of the history of the development of deep learning, the applications of deep learning-based data processing approaches in the SHM of many kinds of civil infrastructures, and the key challenges and future trends of the strategy of deep learning-based SHM.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.419-422
• /
• 2004

The paper classified SI schemes for structural engineering applications based on the type of measured data. Only parametric SI algorithms with optimization processes were reviewed where optimal structural parameters are estimated by minimizing an output error between measured and computed responses. Some important issues in applying SI schemes were analyzed with the definition of an analytical model, noise and sparseness in measured data. As a sample study, the application of a nonlinear time-domain SI algorithm for a shear building was examined.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1105-1108
• /
• 2004

This paper describes the structural analysis result and load test result of accident EMU(Electric Multiple Units). Structural analysis and load test of EMU were performed for the criteria of safety assessment. Structural analysis using commercial I-DEAS software provided important information on the stress distribution and load transfer mechanisms as well as the amount of damages during rolling stock crash. The purpose of the load test is to evaluate a safety which carbody structure shall be considered fully sufficient rigidity so as to satisfy proper system function under maximum load and operating condition. The results have been used to provide the critical information for the criteria of safety assessment.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 가을 학술발표회 논문집
• /
• pp.245-253
• /
• 2004

There has been recent demand for extending the life of age-degraded structures and equipment by such techniques as diagnosis, maintenance, safety assessment, and estimating residual life on iron-making plants and hydraulic, thermal, and nuclear power plants. These techniques take into account comprehensive scenarios that may cause malfunction and structural damage and allow an assessment of risk based on the likely scenarios. In particular the safety assessment and residual life estimation of age-degraded ships and equipment facilities require consideration of various factors such as mechanical and thermal stresses, corrosion, hardness, load variation due to changes of operating condition, crack generation and strength reduction of material by fatigue. In this study, a detail thermal stress analysis, one of useful techniques of safety assessment and maintenance, is performed on a blast furnace by using general FEM code (MSC/NASTRAN).

• 콘크리트학회지
• /
• 제12권3호
• /
• pp.78-84
• /
• 2000

• Structural Engineering and Mechanics
• /
• 제54권2호
• /
• pp.199-219
• /
• 2015

This paper presents the non-destructive evaluation of a high-speed railway bridge using train-induced strain responses. Based on the train-track-bridge interaction analysis, the strain responses of a high-speed railway bridge under moving trains with different operation status could be calculated. The train induced strain responses could be divided into two parts: the force vibration stage and the free vibration stage. The strain-displacement relationship is analysed and used for deriving critical displacements from theoretical stain measurements at a forced vibration stage. The derived displacements would be suitable for the condition assessment of the bridge through design specifications defined indexes and would show certain limits to the practical application. Thus, the damage identification of high-speed railways, such as the stiffness degradation location, needs to be done by comparing the measured strain response under moving trains in different states because the vehicle types of high-speed railway are relatively clear and definite. The monitored strain responses at the free vibration stage, after trains pass through the bridge, would be used for identifying the strain modes. The relationship between and the degradation degree and the strain mode shapes shows certain rules for the widely used simply supported beam bridges. The numerical simulation proves simple and effective for the proposed method to locate and quantify the stiffness degradation.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권6호
• /
• pp.93-101
• /
• 2012

교량에서의 바닥판은 통행차량의 쾌적하고 안전한 주행성 확보하는 역할을 가진다. 동시에 교통하중의 충격 등에 의한 마모 및 전단에 저항하여 상부 구조를 보호하거나 빗물 등의 기타 기상작용이나 화학약품 등 상판의 악영향으로부터 바닥판을 보호하는 역할을 한다. 현재 일반국도상 교량은 총6,248개소로서 이를 효과적으로 관리하기 위하여 현재 차량탑재형 GPR시스템의 도입이 검토되고 있다. 본 연구에서는 교량 및 터널 현황조서 및 기타 국토해양부의 자료를 바탕으로 교량의 재령별, 상부구조형식별, 지역별, 경간장별 바닥판 상태평가등급을 분석하였다. 결과적으로 교량 바닥판 조사 우선순위 결정인자로는 바닥판 상태평가등급, 상부구조 형식, 재령, 연장이 주요 인자인 것으로 도출되었다.