• Bulletin of the Korean Chemical Society
• /
• v.34 no.3
• /
• pp.967-970
• /
• 2013

• Korean Journal of Crystallography
• /
• v.12 no.1
• /
• pp.1-4
• /
• 2001

Single crystals of strontium barium metaborate, Sr/sub 1.36/Ba/sub 1.64/(B₃O/sub 6/)₂, were grown for the first time by the high-temperature-solution-growth technique, and a detailed structure analysis was carried out with the space group R3c. The metaborate (B₃O/sub 6/)/sup 3-/ anion planar groups in the title compound form infinite layers parallel to (001) plane, and Sr and Ba atoms are alternatively placed between the layers and are octahedrally coordinated by six O(2) atoms in the neighbouring anion rings.

• Korean Journal of Crystallography
• /
• v.11 no.3
• /
• pp.176-181
• /
• 2000

Computer-based atomistic simulation methods are applied to address quantitatively the crystal defect chemistry of strontium hexaaluminate, SrAl/sub 12/O/sub 19/. Our calculations show that oxygen Frenkel disorder is the dominant intrinsic defect mode to be expected in the multi-component oxide, though Schottky disorder may also exist. When La and Mg enter into SrAl/sub 12/O/sub 19/. Mg prefers to occupy Al(3)4f tetrahedral sites in the magnetoplumbite structure. Our calculations also indicate that O/sub Sr/ defect is improbable in the structure.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.6
• /
• pp.2059-2062
• /
• 2012

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.274-279
• /
• 1997

Breakthrough curves for separation of cesium and strontium binary components from aqueous solutions in fixed bed by chabazite and 13X were experimentally obtained and simulated the breakthrough curves for binary component adsorption. It is shown that agreements between model predictions and experimental data are relatively good although some deviations are observed. From engineering point of view, the simple model used here can be applied to simulate adsorption breakthrough curves satisfactorily.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.80.1-80.1
• /
• 2010

A strontium titanate ($SrTiO_3$)-based material with a perovskite structure is considered to be one of the promising alternatives to $LaCrO_3$-based materials since $SrTiO_3$ perovskite shows a high chemical stability under both oxidizing and reducing atmospheres at high temperatures. $SrTiO_3$ materials exhibit an n-type semiconducting behavior when it is donor-doped and/or exposed to a reducing atmosphere. In this work, $Sr_{1-x}La_xTi_{1-y}M_yO_3$ materials doped with $La^{3+}$ in A-sites and aliovalent transition metal ions ($M^{n+}$) in B-sites were synthesized by the modified Pechini method. The X-ray diffraction analysis indicated that the materials synthesized by the Pechini process exhibited a single curbic perovskite-type structure without any impurity phases, and are tolerant, to some extent, to cation doping. The sintering behaviors of $Sr_{1-x}La_xTi_{1-y}M_yO_3$ in $H_2/N_2$ and air were characterized by dilatometry and microstructural observations. The electrical conduction mechanism and the dopant effect are discussed based on the defect structures and the electrical conductivities measured at various oxygen partial pressures and temperatures.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.5
• /
• pp.214-217
• /
• 2011

A fresnoite glass-ceramics has been investigating considerably because of the second order nonlinearity as well as its permanent optical nonlinearity. However, the chemical compositions of transparent glass-ceramics examined in the previous studies have been limited to adjust the composition close to fresnoite stoichiometrically. In this study, to investigate the effect of strontium ions in glass-ceramics on second order nonlinearity, $K_2O-TiO_2-SiO_2$ (KTS) glasses soaked in molten $Sr(NO_3)_2$ were prepared. Crystalline phases of the soaked glasses were measured by X-ray diffraction (XRD) as soaking times and additional heat treatment. The exchange of strontium ions into the glass was verified by Field Emission Scanning Electron Microscope (FE-SEM). And the phenomena of second order harmonic generation (SHG) was observed using Nd-YAG laser.

• Analytical Science and Technology
• /
• v.15 no.1
• /
• pp.1-6
• /
• 2002

The selective removal of cesium by ammonium molybdophosphate (AMP) was studied in order to reduce an interference by high radioactivity of cesium on the determination of low radioactive elements in leachate of spent fuel. The removal of Cs, U, Ce, La, Co Ca, Na Sr and K was investigated for the leachate and the bentonite in contact with a spent fuel. More than 90% of cesium was removed by AMP and Ca, Na, Co and Sr was remained in 0.1 M $HNO_3$. However, three valence elements such as La and Ce were also removed by AMP. Though a little of potassium of the bentonite components was adsorbed on AMP, the potassium in the bentonite solution diluted to its concentration in a real sample would not affect the capacity of AMP greatly. From another experiment for the separation of strontium as a leaching indicator of spent fuel, the recovery of strontium in 8.0 M $HNO_3$ solution by using Sr-resin (Eichrom, P/N SR-B50-A) was more than 95% by eluting with 0.05 M $HNO_3$.

• Journal of Radiation Protection and Research
• /
• v.24 no.1
• /
• pp.9-15
• /
• 1999

In order to separate $Sr^{2+}$ selectively from environmental sample solutions containing $Ca^{2+}$, supported liquid membranes(SLM) were prepared and their characteristics of separation were investigated. The contents of carriers, DC18C6 and DNNS, in SLM affected the permeabilities of metal ions and selectivities of $Sr^{2+}$. The selectivity of $Sr^{2+}$ reached to 93.3% in a SLM with 0.1 M DC18C6 and 25 mM DNNS. When the ratio of $Sr^{2+}$ to $Ca^{2+}$ concentration in the feed solution was in the range of 1/25 to 1/50, the selectivity of $Sr^{2+}$ was greater than 90 %. Therefore, it is considered that the SLM prepared in this study is capable of treating environmental sea-water samples for strontium measurement.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.248-254
• /
• 2005

This paper presents a quantitative method of sequential separation of $^{90}Sr,\;^{241}Am$ and Pu nuclides with an anion exchange resin and a Sr-Spec resin. The Pu isotopes were purified with an anion exchange resin. The americium and strontium fractions were separated from the matrix elements with an oxalate co-precipitation method. Americium fraction was separated from the strontium fraction with iron co-precipitation method and purified from lanthanides with anion exchange resin. Strontium-90 was purified from other hindrance elements with the Sr-Spec resin after oxalate co-precipitation. The measurement of Pu and Am isotopes was carried out by an ${\alpha}$-spectrometer. Strontium-90 was measured by a liquid scintillation counter. The radiochemical procedure of $^{90}Sr,\;^{241}Am$ and Pu nuclides investigated in this study has been validated by application to IAEA-Reference soils.