• Structural Engineering and Mechanics
• /
• v.88 no.2
• /
• pp.117-128
• /
• 2023

On February 6, 2023, Türkiye woke up with a strong ground motion felt in a wide geography. As a result of the Kahramanmaraş, Pazarcık and Elbistan earthquakes, which took place 9 hours apart, there was great destruction and loss of life. The 2023 Kahramanmaraş earthquakes occurred on active faults known to pose a high seismic hazard, but their effects were devastating. Seismic code spectra were investigated in Hatay, Adıyaman and Kahramanmaraş where destruction is high. The study mainly focuses on the investigation of ground motion parameters of 6 February Kahramanmaraş earthquakes and the correlation between ground motion parameters. In addition, earthquakes greater than Mw 5.0 that occurred in Türkiye were compared with certain seismic parameters. As in the strong ground motion studies, seismic energy parameters such as Arias intensity, characteristic intensity, cumulative absolute velocity and specific energy density were determined, especially considering the duration content of the earthquake. Based on the study, it was concluded that the structures were overloaded far beyond their normal design levels. This, coupled with significant vertical seismic components, is a contributing factor to the collapse of many buildings in the area. In the evaluation made on Arias intensity, much more energy (approximately ten times) emerged in Kahramanmaraş earthquakes compared to other Türkiye earthquakes. No good correlation was found between moment magnitude and peak ground accelerations, peak ground velocities, Arias intensities and ground motion durations in Türkiye earthquakes. Both high seismic components and long ground motion durations caused intense energy to be transferred to the structures. No strong correlation was found between ground motion durations and other seismic parameters. There is a strong positive correlation between PGA and seismic energy parameter AI. Kahramanmaraş earthquakes revealed that changes should be made in the Turkish seismic code to predict higher spectral acceleration values, especially in earthquake-prone regions in Türkiye.

• The Journal of Korean Society for Radiation Therapy
• /
• v.29 no.2
• /
• pp.65-73
• /
• 2017

Purpose: Machine Performance Check (MPC) is a self-checking software based on the Electronic Portal Imaging Device (EPID) to measure daily beam outputs without external installation. The purpose of this study is to verify the usefulness of MPC by comparing and correlating daily beam output of QA Beamchecker PLUS. Materials and Methods: Linear accelerator (Truebeam 2.5) was used to measure 10 energies which are composed of photon beams(6, 10, 15 MV and 6, 10 MV-FFF) and electron beams(6, 9, 12, 16 and 20 MeV). A total of 80 cycles of data was obtained by measuring beam output measurement before treatment over five months period. The Pearson correlation coefficient was used to evaluate the consistency of the beam output between the MPC and the QA Beamchecker PLUS. In this study, if the Pearson correlation coefficient is; (1) 0.8 or higher, the correlation is very strong (2) between 0.6 and 0.79, the correlation is strong (3) between 0.4 and 0.59, the correlation is moderate (4) between 0.2 and 0.39, the correlation is weak (5) lower than 0.2, the correlation is very weak. Results: Output variations observed between MPC and QA Beamchecker PLUS were within 2 % for photons and electrons. The beam outputs variations of MPC were $0.29{\pm}0.26%$ and $0.30{\pm}0.26%$ for photon and electron beams, respectively. QA Beamchecker PLUS beam outputs were $0.31{\pm}0.24%$ and $0.33{\pm}0.24%$ for photon and electron beams, respectively. The Pearson correlation coefficient between MPC and QA Beamchecker PLUS indicated that photon beams were very strong at 15 MV, and strong at 6 MV, 10 MV, 6 MV-FFF and 10 MV-FFF. For electron beams, the Pearson correlation coefficient were strong at 16 MeV and 20 MeV, moderate at 9 MeV and 12 MeV, and very weak at 6 MeV. Conclusion: MPC showed significantly strong correlation with QA Beamchecker PLUS when testing with photon beams and high-energy electron beams in the evaluation of daily beam output, but the correlation when testing with low-energy electron beams (6 MeV) appeared to be low. However, MPC and QA Beamchecker PLUS are considered to be suitable for checking daily beam output, as they performed within 2 % of beam output consistency during the observation. MPC which can perform faster than the conventional daily beam output measurement tool, is considered to be an effective method for users.

• PNF and Movement
• /
• v.8 no.3
• /
• pp.39-47
• /
• 2010

Purpose : The purpose of this study was to investigate the correlations between clinical balance scales and Balance Performance Monitor parameters in patient with adolescent idiopathic scoliosis (AIS). Methods : Twenty AIS subjects (age, $14.26{\pm}1.93yrs$; height, $160.56{\pm}7.98cm$; weight, $47.54{\pm}6.94kg$)were participated in this study. Postural sway(mean balance, sway angle, sway area, sway path, maximal sway velocity) were were evaluated by balance performance monitor. Measurements for clinical balance scales were Functional reach test (both side), the Lateral reach test (both side) and One leg standing test (both legs). Results : The results were as follows. There were positive strong correlation between major curve direction and left-right sway angle, sway path, maximal sway velocity. There were negative strong correlation between the functional reach and left-right sway angle, sway area, sway path, maximal sway velocity. And the lateral reach were also showed negative strong correlation parameters of balance performance monitor. One leg standing were negatively correlated with left-right sway angle, sway path, maximal sway velocity. Conclusion : The clinical balance scales will be useful tools for balance measurements, and basic tools for clinical setting for patient with AIS.

• 한국지구과학회:학술대회논문집
• /
• 2004.02a
• /
• pp.84-85
• /
• 2004

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.305-309
• /
• 2006

SAR (Synthetic Aperture Radar) technology, which is not influenced by cloud cover because of using electromagnetic wave of long wavelength, has an advantage in mapping the earth. NASA, recognizing these strong points of SAR, launched SRTM (Shuttle Radar Topography klission), and acquired the topographic information of the earth. SRTM and NED (National Elevation Data) of USGS were used for the research and vegetation height map was produced through differentiating the two data. Correlation between SRTM-NED and planting year was analyzed to see the relationship. Strong correlation was detected and it shows the feasibility of estimating timber age and eventually creating timber age map from SRTM-NED. Additional analyses were conducted to check if the linearity is influenced by regional characteristics and forest uniformity. As results, the correlation between SRTM-NED and timber age is influenced by roughness of the terrain. Overall, this paper shows that timber age estimation using SRTM and NED can be sufficiently practical.

• Physical Therapy Korea
• /
• v.28 no.3
• /
• pp.208-214
• /
• 2021

Background: The CKCUES test evaluates the functional performance of the shoulder joint. The CKCUES test scores CKC exercises of the upper limbs to examine shoulder stability. Although the CKCUES test provides quantitative data on functional ability and performance, no study has determined the relationship between CKCUES scores and SA and TB muscle strength. Objects: The objective of this study is to determine the relationship between the CKCUES test scores and the strength of the SA and TB muscles in the CKCUES and unilateral CKCUES tests. Methods: Sixty-six healthy male volunteers participated in the study. A Smart KEMA strength sensor measured SA and TB muscle strength. Two parallel lines on the floor indicated the initial hand placement to start CKCUES tests. For 15 seconds, the subject raises one hand and reaches over to touch the supporting hand, then returns to the starting position. Results: The correlation between the CKCUES test scores and the strength of the SA was strong (r = 0.650, p < 0.001), and the TB was moderate (r = 0.438, p < 0.001). The correlation between the unilateral CKCUES test and the strength of the SA of the supporting side was strong (r = 0.605, p < 0.001), and swing side was strong (r = 0.681, p < 0.001). The correlation between the unilateral CKCUES test and the strength of the TB of the supporting side was moderate (r = 0.409, p < 0.001), and swing side was moderate (r = 0.482, p < 0.001). Conclusion: Our study showed that the CKCUES test had a strong association with isometric strength of SA and moderate association with that of TB. These findings suggest that the CKCUES test can evaluate the function of the SA. Moreover, the unilateral CKCUES test can evaluate unilateral shoulder function.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.5-7
• /
• 2012

Repeated using carpentry workers work at working tools because of occupational low back pain, such as musculoskeletal disorders, occupational diseases are on the rise. For this purpose, through the analysis of musculoskeletal disorders and work tools and studies are underway to improve the working conditions of the workers. However, existing previous studies may not reflect the working tools used for carpentry worker dies when working at a construction site that Therefore, in this study, the work in the form of construction, one of the jobs of worker dies classified according to the working tools of musculoskeletal disorders correlated to analyze. The results of this study are as follows. working tools of a total of seven different dies used in the installation process. Musculoskeletal disorders, waist / drill such correlation was very strong. Also showed that a total of three of the tools used in the formwork dismantling cutter musculoskeletal disorders of the arm / elbow and a very strong correlation.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.9
• /
• pp.1219-1228
• /
• 1995

In this paper, we propose a dynamic bandwidth allocation scheme for the transmission of VBR video source through ATM based BISDN. In order to efficiently evaluate the required bandwidth, the characteristics of the VBR video sources generated by the MPEG coder are analyzed with variations in the number of GOP and quantizer scale. The required bandwidth for VBR video source is estimated by a prediction algorithm using scene and frame correlations as well as the statistical properties of the VBR video source. Scene correlation represents a strong correlation among the adjacent slices in a frame, and frame correlation represents a strong correlation among the frames. The statistical properties based on the traffic parameters of video sources such as peak rate, average rate, and standard deviation of source are determined through simulation. The performance of the proposed bandwidth allocation scheme is evaluated in terms of the over-allocated bandwidth, bandwidth utilization, and cell loss rate with variations in the quantizer scale and the number of GOP. It is shown that the results of simulation based on the proposed scheme are superior to those of the conventional methods.

• Ocean and Polar Research
• /
• v.24 no.3
• /
• pp.267-278
• /
• 2002

This study investigated the spatial characteristics of warming trends and the dipole-like pattern of temperature field in the Antarctic Peninsula using surface air temperature (SAT) of 10 stations in the vicinity of the Antarctic Peninsula. SAT data for the 1962-2001 period at 6 stations (Rothera, Faraday/Vernadsky, Bellingshausen, Orcadas, Esperanza, Halley) revealed in general the larger warming trends in autumn and winter except for Halley. The largest warming was shown for August in the west side of the Peninsula (more than $0.9^{\circ}C/decade$). On the other hand, the recent 14-year SAT data showed the strong warming trends at 9 stations except for Halley in the earlier period (April-June) than August for the 1962-2001 period. The largest warming appeared in May at Esperanza and Butler Island. SAT of the two sides showed significant positive correlations over most of the period except for the mid- and the late 1970s, in which significant negative correlations were found. In the correlation analysis between SAT and sea surface temperature (SST) anomalies in the NINO 3.4 region, strong negative correlation was found in the west side of the Peninsula. Details of the correlation analysis exhibited that the negative correlation was significantly strong from the early 1980s to the mid-1990s. However, it was difficult to find significant correlations of ENSO with SAT in the east side of the Peninsula. So, in this study it failed to find out clearly the out-of-phase relationship of SAT across the Antarctic Peninsula.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.3
• /
• pp.171-175
• /
• 2013

It has passed 10 years to enact 'Act on Special Measures for the Promotion of Venture Businesses.' With 10 years' data book, we study to find the correlation between venture investment and start-up. According to correlation analysis, we find that venture investment and start-up are strong and positive-related, and the increment of investment can contribute to the increment of start-up.