• 한국통신학회논문지
• /
• 제21권9호
• /
• pp.2505-2513
• /
• 1996

이 논문에서는 모드정합법과 유도(induced) EMF방법을 이용하여 유전체 기판상에 놓인 스트립 형태의 도파관 마운트의 입력 임피던스 특성을 해석하였다. 도파관 내에 유전체 기판이 존재하는 부분을 단면의 일부가 유전체로 채워진 도파관으로 모델링하여, 이 구조에 대한 하이브리드(hybrid) 모드 해석을 수행하였다. 여기서 계산된 모드함수들을 이용하여 유전체 기판에 의한 전자파 산란문제를 모드정합법으로 풀었다. 그리고, 이 결과와 유도 EMF방법을 이용하여 마운트 간극에서 본 입력 임피던스를 계산하였다. 여기서 얻어진 계산 결과를 다른 수치해석법에 의한 계산결과와 비교하여 그 타당성을 검증하였으며, 기판의 폭이나 마운트 간극의 위치등의 파라미터가 임피던스에 미치는 영향을 고찰하였다.

• ETRI Journal
• /
• 제29권6호
• /
• pp.808-810
• /
• 2007

We demonstrate 10 Gbps optical signal transmission via long-range surface plasmon polaritons (LR-SPPs) in a very thin metal strip-guided geometry. The LR-SPP waveguide was fabricated as a 14 nm thick, 2.5 ${\mu}m$ wide, and 4 cm long gold strip embedded in a polymer and pigtailed with single-mode fibers. The total insertion loss of 16 dB was achieved at a wavelength of 1.55 ${\mu}m$ as a carrier wave. In a 10 Gbps optical signal transmission experiment, the LR-SPP waveguide exhibits an excellent eye opening and a 2.2 dB power penalty at $10^{-12}$ bit error rate. We confirm, for the first time, that LR-SPPs can efficiently transfer data signals as well as the carrier light.

• 대한기계학회논문집
• /
• 제17권2호
• /
• pp.257-266
• /
• 1993

본 연구에서는 보강롤의 굽힘변형을 고려한 젠지미어 압연기의 롤변형 해석을 통해, 궈터웨이브의 발생을 시뮬레이션하고, 형상제어 수단들의 궈터웨이브 억제에 미 치는 영향을 분석하여 궈터웨이브 감소 방안을 수립하였고, 실제 현장 압연실험을 통 해 그 제어효과를 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.111-116
• /
• 2000

A semi-infinite interfacial crack propagated with constant velocity in two bonded anisotropic strip under out-of-plane clamped displacements is analyzed. The asymptotic stress and displacement fields near the crack tip are obtained, where the results get more general expressions applicable not only to isotropic/orthotropic materials but also to the extent of the anisotropic material having one plane of elastic symmetry for the interfacial crack. The dynamic stress intensity factor is obtained as a closed form, which is decreased as the velocity of crack propagation increases. The critical velocity where the stress intensity factor comes to zero is obtained, which agrees with the lower value between the critical values of parallel crack merged in the material 1 and 2 adjacent to the interface. The dynamic energy release rate is also obtained as a form related to the stress intensity factor.

• Journal of the Optical Society of Korea
• /
• 제18권2호
• /
• pp.101-109
• /
• 2014

In this paper, four apodization functions are proposed for silicon-on-insulator (SOI) strip waveguides with sidewall-corrugated gratings. The effects of apodization functions on the full width at half maximum (FWHM), the side-lobe level, and the reflectivity of the reflection spectrum are studied using the coupled-mode theory (CMT) and the transfer-matrix method (TMM). The results show that applying proposed apodization functions creates very good filtering characteristics. Among investigated apodized waveguides, the apodization functions of Polynomial and z-power have the best performance in reducing side-lobes, where the side-lobe oscillations are entirely removed. Four functions are also used for precise adjustment of the bandwidth. Simulation results show that the minimum and maximum values of the FWHM are 0.74 nm and 8.48 nm respectively. In some investigated functions, changing the apodization parameters decreases the reflectivity which is compensated by increasing the grating length.

• 전력전자학회논문지
• /
• 제7권2호
• /
• pp.186-193
• /
• 2002

연속 공정 라인을 구성하는 롤러들의 속도뿐만 아니라 토크를 적적히 제어할 수 있는 통합형 제어기를 제안하였다. 여러 대의 롤러들이 동시에 가감속 할 때 발생하는 속도 편차는 소재의 장력을 유발하여 가공중인 제품의 품질에 나쁜 영향을 미치게 된다. 제안된 통합형 제어기를 사용하면 속도 기준값 편차나 속도제어 기 특성차이가 존재하더라도 토크 및 속도 기준값을 잘 추종하도록 제어하는 것이 가능하다 제안된 제어기는 가감속 등의 과도상태에는 속도 기준 값을 추종하는 것을 위주로 하고 정상 운전속도에서는 토크 기준값에 따라 제어함으로서 인접한 롤러간의 부하를 분담하도록 설계되었다 특히 제안된 제어기는 인접한 롤러의 제어 정보를 필요로 하지 않으므로 각각의 롤러 제어기 유닛에 쉽게 구현될 수 있다는 장점이 있다. 연속 공정 라인 모의 실험장치에서 제안된 제어기의 토크 및 속도 제어 특성을 비교 검토하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권2호
• /
• pp.127-136
• /
• 2016

Springing is the resonance phenomenon of a ship hull girder with incoming waves having the same natural frequency of the ship. In this study, a simple and reliable calculation method was developed based on quadratic strip theory using the Timoshenko beam approach as an elastic hull girder. Second-order hydrodynamic forces and Froude-Krylov forces were applied as the external force. To improve the accuracy of the strip method, the variation in the added mass along the ship hull longitudinal direction, so called tip-effect, was considered. The J-factor was also employed to compensate for the effect of three-dimensional fluid motion on the two-node vibration of the ship. Using the developed method, the first- and second-order vertical bending moments of the Flokstra ship were compared. A comparative study was also carried out for a uniform barge ship and a 10,000 TEU container ship with the respective methods including the J-factor and tip-effect.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제13권4호
• /
• pp.299-307
• /
• 2013

The value of blood sugar is measured by a personal blood glucose meter which consists of two parts: a glucose strip and a blood glucose meter. A personal blood glucose meter makes use of electric media which are composed of glucose oxidase and electron. This study is to propose a method of reliability demonstration test derived from field data analysis and FMEA(Failure Mode and Effect Analysis). Detailed Conditions for reliability demonstration test are selected from the comparison of various failure mechanisms. The most dominant failure mechanism is wear-out which is caused by strip insertion/extraction. The testing device that can reproduce the failure mechanism of strip insertion/extraction is made to conduct reliability demonstration test. Using the testing device, it is confirmed that target lifetime of selected devices is more than 2 years.

• Steel and Composite Structures
• /
• 제33권5호
• /
• pp.729-746
• /
• 2019

The nonlinear behavior of single- and multi-story steel plate shear walls (SPSWs) strengthened with three different patterns of fiber reinforced polymer (FRP) laminates (including single-strip, multi-strip and fully FRP-strengthened models) is studied using the finite element analysis. In the research, the effects of orientation, width, thickness and type (glass or carbon) of FRP sheets as well as the system aspect ratio and height are investigated. Results show that, despite an increase in the system strength using FRP sheets, ductility of reinforced SPSWs is decreased due to the delay in the initiation of yielding in the infill wall, while their initial stiffness does not change significantly. The content/type/reinforcement pattern of FRPs does affect the nonlinear behavior characteristics and also the mode and pattern of failure. In the case of multi-strip and fully FRP-strengthened models, the use of FPR sheets almost along the direction of the infill wall tension fields can maximize the effectiveness of reinforcement. In the case of single-strip pattern, the effectiveness of reinforcement is decreased for larger aspect ratios. Moreover, a relatively simplified and approximate theoretical procedure for estimating the strength of SPSWs reinforced with different patterns of FRP laminates is presented and compared with the analytical results.

• 한국산업정보학회논문지
• /
• 제4권1호
• /
• pp.102-109
• /
• 1999

본 논문에서는 접지평면위에 2개의 유전체 층을 가지는 완전도체 격자구조에서의 전자파 산란문제를 간단한 방수치해석 방법으로 잘 알려진 PMM방법을 적용하여 입사각에 따라 수치해석하였다. 산란전자계는 Floquet 모드 함수의 급수로 전개하였다. 경계조건은 미지의 계수를 구하기 위하여 적용하였고, 도체의 경계조건은 접선성분의 전계와 스트립 위의 전류와의 관계를 위해 적용하였다. 입사각이 수직일 때 비유전율이 증가함에 따라 기하광학적 반사전력의 변하는 최소점은 스트립 폭이 높은 값으로 이동한다는 것은 주목되며, 이때 수직입사시 대부분의 전력은 다른 각도의 방향으로 산란된다.