Browse > Article
http://dx.doi.org/10.12989/scs.2019.33.5.729

Behavior of FRP-reinforced steel plate shear walls with various reinforcement designs  

Seddighi, Mehdi (Department of Civil Engineering, Faculty of Engineering, Iran University of Science and Technology)
Barkhordari, Mohammad A. (Department of Civil Engineering, Faculty of Engineering, Iran University of Science and Technology)
Hosseinzadeh, S.A.A. (Department of Civil Engineering, Faculty of Engineering, Golestan University)
Publication Information
Steel and Composite Structures / v.33, no.5, 2019 , pp. 729-746 More about this Journal
Abstract
The nonlinear behavior of single- and multi-story steel plate shear walls (SPSWs) strengthened with three different patterns of fiber reinforced polymer (FRP) laminates (including single-strip, multi-strip and fully FRP-strengthened models) is studied using the finite element analysis. In the research, the effects of orientation, width, thickness and type (glass or carbon) of FRP sheets as well as the system aspect ratio and height are investigated. Results show that, despite an increase in the system strength using FRP sheets, ductility of reinforced SPSWs is decreased due to the delay in the initiation of yielding in the infill wall, while their initial stiffness does not change significantly. The content/type/reinforcement pattern of FRPs does affect the nonlinear behavior characteristics and also the mode and pattern of failure. In the case of multi-strip and fully FRP-strengthened models, the use of FPR sheets almost along the direction of the infill wall tension fields can maximize the effectiveness of reinforcement. In the case of single-strip pattern, the effectiveness of reinforcement is decreased for larger aspect ratios. Moreover, a relatively simplified and approximate theoretical procedure for estimating the strength of SPSWs reinforced with different patterns of FRP laminates is presented and compared with the analytical results.
Keywords
composite steel plate shear walls; FRP; reinforcement pattern; ultimate strength; initial stiffness; ductility; energy dissipation;
Citations & Related Records
Times Cited By KSCI : 14  (Citation Analysis)
연도 인용수 순위
1 AISC, Steel Design Guide 20 (2007), Steel plate shear walls, American Institute of Steel Construction; Chicago, IL, USA.
2 Ali, M.M., Osman, S.A., Husam, O.A. and Al-Zand, A.W. (2018), "Numerical study of the cyclic behavior of steel plate shear wall systems (SPSWs) with differently shaped openings", Steel Compos. Struct., Int. J., 26(3), 361-373. https://doi.org/10.12989/scs.2018.26.3.361
3 ASCE (2005), SEI/ASCE 7-05, Minimum design loads for buildings and other structures, American Society of Civil Engineers; VA, USA.
4 ATC (1992), Guidelines for cyclic seismic testing of components of steel structures for buildings, Report No. ATC-24, Applied Technology Council; Redwood City, CA, USA.
5 Bagherinejad, M.H. and Haghollahi, A. (2018), "Topology optimization of steel plate shear walls in the moment frames", Steel Compos. Struct., Int. J., 29(6), 771-783. https://doi.org/10.12989/scs.2018.29.6.771
6 Barua, K. and Bhowmick, A.K. (2019), "Nonlinear seismic performance of code designed perforated steel plate shear walls", Steel Compos. Struct., Int. J., 31(1), 85-98. http://dx.doi.org/10.12989/scs.2019.31.1.085
7 Brando, G. and De Matteis, G. (2011), "Experimental and numerical analysis of a multi-stiffened pure aluminium shear panel", Thin-Wall. Struct., 49(10), 1277-1287. https://doi.org/10.1016/j.tws.2011.05.007   DOI
8 Chatterjee, A.K., Bhowmick, A. and Bagchi, A. (2015), "Development of a simplified equivalent braced frame model for steel plate shear wall systems", Steel Compos. Struct., Int. J., 18(3), 711-737. https://doi.org/10.12989/scs.2015.18.3.711   DOI
9 Dakhel, M., Donchev, T. and Hadavinia, H. (2019), "Behaviour of connections for hybrid FRP/steel shear walls", Thin-Wall. Struct., 134, 52-60. https://doi.org/10.1016/j.tws.2018.10.008   DOI
10 Deng, E.F., Zong, L. and Ding, Y. (2019), "Numerical and analytical study on initial stiffness of corrugated steel plate shear walls in modular construction", Steel Compos. Struct., Int. J., 32(3), 347-359. https://doi.org/10.12989/scs.2019.32.3.347
11 Dhar, M.M. and Bhowmick, A.K. (2016), "Seismic response estimation of steel plate shear walls using nonlinear static methods", Steel Compos. Struct., Int. J., 20(4), 777-799. https://doi.org/10.12989/scs.2016.20.4.777   DOI
12 Driver, R.G., Kulak, G.L., Kennedy, D.J.L. and Elwi, A.E. (1998), "Cyclic test of four-story steel plate shear wall", J. Struct. Eng., 124(2), 112-120. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:2(112)   DOI
13 Farzampour, A., Mansouri, I. and Hu, J.W. (2018), "Seismic behavior investigation of the corrugated steel shear walls considering variations of corrugation geometrical characteristics", Int. J. Steel Struct., 18(4), 1297-1305. https://doi.org/10.1007/s13296-018-0121-z   DOI
14 Habashi, H.R. and Alinia, M.M. (2010), "Characteristics of the wall-frame interaction in steel plate shear walls", J. Constr. Steel Res., 66(2), 150-158. https://doi.org/10.1016/j.jcsr.2009.09.004   DOI
15 Hatami, F., Ghamari, A. and Rahai, A. (2012), "Investigating the properties of steel shear walls reinforced with Carbon Fiber Polymers (CFRP)", J. Constr. Steel Res., 70, 36-42. https://doi.org/10.1016/j.jcsr.2011.07.010   DOI
16 Hatami, F., Ghamari, A. and Hatami, F. (2014), "Effect of fiber angle on LYP steel shear walls behavior", J. Central South Univ., 21(2), 768-774. https://doi.org/10.1007/s11771-014-2000-x   DOI
17 Kalali, H., Hajsadeghi, M., Zirakian, T. and Alaee, F.J. (2015), "Hysteretic performance of SPSWs with trapezoidally horizontal corrugated web-plates", Steel Compos. Struct., Int. J., 19(2), 277-292. https://doi.org/10.12989/scs.2015.19.2.277   DOI
18 Hosseinzadeh, S.A.A. and Tehranizadeh, M. (2012), "Introduction of stiffened large rectangular openings in steel plate shear walls", J. Constr. Steel Res., 77, 180-192. https://doi.org/10.1016/j.jcsr.2012.05.010   DOI
19 Hosseinzadeh, S.A.A. and Tehranizadeh, M. (2014a), "Behavioral characteristics of code designed steel plate shear wall systems", J. Constr. Steel Res., 99, 72-84. https://doi.org/10.1016/j.jcsr.2014.04.004   DOI
20 Hosseinzadeh, S.A.A. and Tehranizadeh, M. (2014b), "The wall-frame interaction effect in steel plate shear wall systems", J. Constr. Steel Res., 98, 88-99. https://doi.org/10.1016/j.jcsr.2014.02.013   DOI
21 Khazaei-Poul, M. and Nateghi-Alahi, F. (2012), "Theoretical and numerical study on the strengthened steel plate shear walls by FRP laminates", Int. J. Eng., 25 (1), 25-37.
22 Khazaei-Poul, M. and Nateghi-Alahi, F. and Zhao, X.L. (2016), "Experimental testing on CFRP strengthened thin steel plates under shear loading", Thin-Wall. Struct., 109, 217-226. https://doi.org/10.1016/j.tws.2016.09.026   DOI
23 Lubell, A.S., Prion, H.G., Ventura, C.E. and Rezai, M. (2000), "Unstiffened steel plate shear wall performance under cyclic loading", J. Struct. Eng., 126(4), 453-460. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:4(453)   DOI
24 Kim, J., Kwon, M., Seo, H. and Jung, W. (2015), "Performance evaluation of GIP wall systems for strengthening steel-frame structures", Compos. Struct., 125, 228-238. https://doi.org/10.1016/j.compstruct.2015.02.021   DOI
25 Kwon, M., Kim, J., Jung, W. and Seo, H. (2015), "Design procedure of GFRP-infill panels to improve the strength of steelframe structures", Compos. Struct., 120, 262-274. https://doi.org/10.1016/j.compstruct.2014.09.067   DOI
26 Liu, W.Y., Li, G.Q. and Jiang, J. (2018), "Capacity design of boundary elements of beam-connected buckling restrained steel plate shear wall", Steel Compos. Struct., Int. J., 29(2), 231-242. https://doi.org/10.12989/scs.2018.29.2.231
27 Vatansever, C. and Yardimci, N. (2011), "Experimental investigation of thin steel plate shear walls with different infill-to-boundary frame connections", Steel Compos. Struct., Int. J., 11(3), 251-271. http://dx.doi.org/10.12989/scs.2011.11.3.251   DOI
28 Shekastehband, B., Azaraxsh, A.A. and Showkati, H. (2017), "Hysteretic behavior of perforated steel plate shear walls with beam-only connected infill plates", Steel Compos. Struct., Int. J., 25(4), 505-521. https://doi.org/10.12989/scs.2017.25.4.505
29 Tabrizi, M.A. and Rahai, A. (2011), "Perforated steel shear walls with FRP reinforcement of opening edges", Austral. J. Basic. Appl. Sci., 5(10), 672-684.
30 Vatansever, C. and Berman, J.W. (2015), "Analytical investigation of thin steel plate shear walls with screwed infill plate", Steel Compos. Struct., Int. J., 19(5), 1145-1165. http://dx.doi.org/10.12989/scs.2015.19.5.1145   DOI
31 Massumi, A., Karimi, N. and Ahmadi, M. (2018), "Effects of openings geometry and relative area on seismic performance of steel shear walls", Steel Compos. Struct., Int. J., 28(5), 617-628. https://doi.org/10.12989/scs.2018.28.5.617
32 Petkune, N., Donchev, T., Hadavinia, H., Wertheim, D. and Limbachiya, M. (2018), "Comparison of the behavior of steel, pure FRP and hybrid shear walls under cyclic seismic loading in aspect of stiffness degradation and energy absorption", J. Constr. Build. Mater., 165, 621-630. https://doi.org/10.1016/j.conbuildmat.2017.12.013   DOI
33 Memarzadeh, P., Azhari, M. and Saadatpour, M.M. (2010), "A parametric study on buckling loads and tension field stress patterns of steel plate shear walls concerning buckling modes", Steel Compos. Struct., Int. J., 10(1), 87-108. https://doi.org/10.12989/scs.2010.10.1.087   DOI
34 Nateghi-Alahi, F. and Khazaei-Poul, M. (2012), "Experimental study of steel plate shear walls with infill plates strengthened by GFRP laminates", J. Constr. Steel Res., 78, 159-172. https://doi.org/10.1016/j.jcsr.2012.07.002   DOI
35 Petkune, N., Donchev, T., Hadavinia, H., Limbachiya, M. and Wertheim, D. (2016), "Performance of pristine and retrofitted hybrid steel/fibre reinforced polymer composite shear walls", J. Constr. Build. Mater., 117, 198-208. https://doi.org/10.1016/j.conbuildmat.2016.05.013   DOI
36 Rahmzadeh, A., Ghassemieh, M., Park, Y. and Abolmaali, A. (2016), "Effect of stiffeners on steel plate shear wall systems", Steel Compos. Struct., Int. J., 20(3), 545-569. http://dx.doi.org/10.12989/scs.2016.20.3.545   DOI
37 Sahebjam, A. and Showkati, H. (2016), "Experimental study on the cyclic behavior of perforated CFRP strengthened steel shear walls", Archives. Civil. Mech. Eng., 16(3), 365-379. https://doi.org/10.1016/j.acme.2016.01.009   DOI
38 AISC, ANSI/AISC 341-05 (2005), Seismic provisions for structural steel buildings, American Institute of Steel Construction; Chicago, IL, USA.
39 ABAQUS (2014), Standard theory manual, Version 6.14-2, Hibbitt, Karlsson and Sorensen Inc., (HKS), USA.
40 AISC, ANSI/AISC 358-05 (2005), Prequalified connections for special and intermediate steel moment frames for seismic applications, American Institute of Steel Construction; Chicago, IL, USA.