• Korean Journal of Child Studies
• /
• v.27 no.6
• /
• pp.249-261
• /
• 2006

This study investigated the influence of socio-environmental variables and cognitive variables on adolescent depression. Subjects were 494 middle and high school students of Deagu. The instrument was a self-report questionnaire; data were analyzed by t-test, stepwise multiple regression and path analysis. Among Socio-environmental variables, social support variables had a stronger effect on depression than stress. Among cognitive variables, automatic thought had a stronger effect on depression than cognitive distortion and socio-environmental variables. In path analysis, social support had a direct effect on cognitive distortion and automatic thought. Automatic thought served as a mediater of the relation between social support and depression. Although adolescent stress resulted in high depression, its effect on depression varied with the level of perceived social support.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.4_2
• /
• pp.973-980
• /
• 2024

Dependence of dynamic fracture path on loading velocity was observed from experimental results based on the three point bending fracture in cast iron. In this study, 3D and 2D numerical simulations are used to evaluate singular stress fields near crack tip and fracture mechanics parameters. Moving finite element technique, 2D and 3D Delauney automatic mesh generation and contact-noncontact evaluation is introduced into the numerical method. Dynamic fracture thoughness is decreased with increase of impact loading velocity. Fracture mode-ratio corresponds to initial kink angle of fracture path. The numerical result shows that the maximum hoop stress criterion cannot be applied to dynamic fracture of cast iron.

• Korean Journal of Materials Research
• /
• v.25 no.5
• /
• pp.221-225
• /
• 2015

In-situ neutron diffraction has been employed to examine the effect of strain path on lattice strain evolution during monotonic and cyclic tension in an extruded Mg-8.5wt.%Al alloy. In the cyclic tension test, the maximum applied stress increased with cycle number. Lattice strain data were acquired for three grain orientations, characterized by the plane normal to the stress axis. The lattice strain in the hard {10.0} orientation, which is unfavorably oriented for both basal slip and {10.2} extension twinning, evolved linearly throughout both tests during loading and unloading. The {00.2} orientation exhibited significant relaxation associated with {10.2} extension twinning. Coupled with a linear lattice strain unloading behavior, this relaxation led to increasingly compressive residual strains in the {00.2} orientation with increasing cycle number. The {10.1} orientation is favorably oriented for basal slip, and thus showed a soft grain behavior. Microyielding occurred in the monotonic tension test and in all cycles of the cyclic test at an applied stress of ~50 MPa, indicating that strain hardening in this orientation was not completely stable from one cycle to the next. The lattice strain unloading behavior was linear in the {10.1} orientation, leading to a compressive residual strain after every cycle, which, however, did not increase systematically from one cycle to the next as in the {00.2} orientation.

• Journal of the Korean Home Economics Association
• /
• v.36 no.9
• /
• pp.49-62
• /
• 1998

This paper investigates the parenting stress of fathers who have preschooler. At first, a causal model constructed, including the parenting stress as a dependent variable and the psychological characteristics of paternal self-esteem and parenting efficacy as parameters. Based on the change of parenting stress, self-esteem and parenting efficacy according to various pertinent to fathers, the causal effect of various variables effecting on the paternal parenting stress is analyzed. The SPSS PC program was used for the statistical analysis, where fully exploited were frequencies, percentages, means, standard deviations, Cronbach α, one-way analysis(ANOVA), path analysis. The results can be summarized into 3 parts, in conclusion: 1) The younger a father is, the higher paternal self-esteem becomes. Paternal self-esteem trend was there, for a father who is a member of large family, and for a father whose education level is high, and for a father whose occupation is professional. Regarding parenting sense of competence, a father shows confidence when he has more income, more educated and less children. 2) The variable analysis effecting on the parenting stress dut to the paternal environment shows that a father feels more stress when his income is less and his spouse is working. The sub-factor analysis on the parenting stress shows that 'typical stress dut to the parenting' increases when his income is less and his spouse is working, and 'pressures pertaning to the parental role and distress' increases for a father with less income, working spouse, less educated and non-professional job. Further 'guilty to the parenting by others' shows higher for a father with less income and a working spouse. 3) The path analysis, which were performed to check the causality of the parenting stress dut to various variables, shows that the self-esteem and the parenting efficacy are significant factors directly effecting on the paternal parenting stress, and the job-satisfaction and marriage-satisfaction are significantly effecting on the parenting stress both directly and indirectly.

• Journal of Korean society of Dental Hygiene
• /
• v.12 no.3
• /
• pp.471-483
• /
• 2012

Objectives : This study looked at the relationship between occupational stress and the Oral Health Impact Profile (OHIP), to evaluate the effect of occupational stress-related factors. Methods : Data was obtained from a cross-sectional survey of 260 local officials in Gangwondo. The research comprised three questions relating to subjective oral symptoms, an occupational stress measurement tool and an oral health impact factor which was composed of questions. The data was analysed using t-test, one-way ANOVA, Pearson correlation and path analysis in Amos. Results : Occupational stress had a positive correlation to drinking frequency, Oral symptoms had a negative correlation. And drinking frequency, smoking amount and occupational stress had a positive correlation to oral symptoms. It denoted that drinking frequency, occupational stress and oral symptoms had a negative correlation to OHIP. The path model had an excellent goodness of fit (p=0.07, namely p>0.05). Five 'goodness-of-fit indices' of the model were all above 0.9: GFI=0.987, AGFI=0.952, NFI=0.902, IFI=0.939, CFI=0.934), and its RMSEA was 0.045. Occupational stress and oral symptoms had a firsthand impact on OHIP. In addition, it affected OHIP through the parameters of oral symptoms. Occupational stress exercised a firsthand influence on drinking frequency, drinking frequency exercised a firsthand influence on smoking amount. Smoking amount had a firsthand impact on oral symptoms. Conclusions: Oral health education programs for the development of an improved oral hygiene environment through reduction in drinking and smoking also need to focus on relieving stress by improving workplace culture. In addition, due to good communication is required to reduce occupational stress caused by interpersonal conflict.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.10a
• /
• pp.248-253
• /
• 1998

Recently, the uses of Ceramic/metal bonded joints, resin/metal joints, adhesive joints, composite materials which are composed of dissimiliar materials have increased in various industry fields. Since the ceramic/metal bonded joints material is made at a high temperature, residual stress distributions due to differences in material properties were investigated by varying material parameters. The two dimensional finite element analysis was performed to study residual stress distribution in Si3N4/SM45C bonded joint with a copper interlayer between the silicon nitride(Si3N4) and the structural carbon steel(SM45C) and 4-point bending tests were carried out under room temperature. Fracture surface and crack propagation path were observed using scanning electron microscope and characteristics of its fracture was discussed.

• Journal of Magnetics
• /
• v.19 no.2
• /
• pp.146-150
• /
• 2014

The objective of this paper is to provide a comparison between two transverse flux rotary machines (TFRM) with different topologies of stator cores. Depending on how to make stator core with laminated steel sheets, the one topology is 'perpendicular stacking core' and the other is 'separated core'. Both of the two cores have been designed considering 3-dimensional (3-D) magnetic flux path with the same output power conditions, but the core losses are quite different and it causes different magnetic and thermal characteristics. For comparison of these two topologies of stator cores, therefore, core losses have been calculated and used as a heat source in no-load conditions, and the thermal stress has been also calculated. 3-D finite element method has been used for the magnetic field, thermal, and stress analysis to consider the 3-D flux path of the TFRM. After comparing the analysis results of the two topologies, experimental results are also presented and discussed.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1999.10c
• /
• pp.575-581
• /
• 1999

Yielding is an important feature of the stress-strain behavior of clays. This study was performed to estabilish the yielding curves and properties for a marine caly from Jangheung. Chonnam Province . A series of tests was done by means of the various stress path tests. Results of the tests are as follows ; 1) The laboratory -determined Ko is very similar to that applied to the Jaky equation. 2) The shape of yielding curve is nealry symmetrical about the p' axis like other natural clays. 3) The critical state parameters, Mc and Me are the same for compression and extension tests which contrasts with the results of the isotropically consolidated soils. 4) The state boundary suface using the critical state paratmers can resresent the normalized yielding curve obtained by various stress path experiments.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.4
• /
• pp.83-98
• /
• 2005

In this paper, a conceptual approach of the stress path method was newly proposed for a rational estimation of settlements of saturated clay deposits. In the proposed approach, settlement-related characteristic deformation behaviors of a specific clay deposit, which can cover all probable stress changes expected in the field, are experimentally evaluated in advance. Then settlements of various structures constructed on the deposit are easily estimated with only the characteristic deformation behaviors and without any additional experimental effort. In Part I of this paper, in order to provide practicality to the new conceptual approach, we developed a detailed procedure which is capable of evaluating characteristic deformation behaviors of a saturated clay deposit with only a limited number of tests and easily predicting deformations under a given stress change using the characteristic deformation behaviors. The applicability of the developed procedure was clearly shown by presenting an actual application example.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.4
• /
• pp.423-431
• /
• 2004

For the fracture mechanics analysis of cracks in welds of dissimilar steels, residual stress analysis and fracture analysis must be performed simultaneously. The standard definition of the J -integral leads to a path dependent value in the presence of a residual stress field. And unlike cracks in homogeneous materials, a bimaterial interface crack always induces both opening and shearing modes of stress in the vicinity of the crack tip. Therefore, it is necessary to develope a path independent J-integral definition for a crack in a residual stress field generated by welding of dissimilar steels. This paper addresses the modification of the Rice-J-integral to produce a path independent J -integral when residual stresses due to welding of dissimilar steels and external forces are present. The residual stress problem is treated as an initial strain problem and the J-integral proposed for this class of problems is used. And a program which can evaluate the J -integral for a crack in a weld of dissimialr steels is developed using proposed J integral definition.