• 대한기계학회논문집A
• /
• 제34권10호
• /
• pp.1339-1344
• /
• 2010

모달중첩법은 구조물의 진동특성을 고려하여 내구수명을 평가할 수 있는 내구해석 기법이다. 본 논문에서는 모달중첩법과 유사하면서도 다물체 동역학 해석시 모달좌표를 직접 계산하여 전체적인 해석시간을 줄일 수 있는 모달응력 회복법을 이용한 내구해석 기법의 타당성에 대하여 검토하였다. 이를 위해 자동차 부품 중 대표적으로 동특성을 고려해야 하는 토션빔 액슬에 대하여 모달응력 회복법을 이용한 내구해석 및 시험을 실시하였다. 해석결과는 시험결과와 취약위치, 내구수명 등이 양호한 일치 결과를 나타내었다. 따라서 모달응력 회복법을 이용한 내구해석 기법은 다양한 구조물의 동특성을 반영한 내구수명 평가에 적용될 수 있을 것이다.

• 패션비즈니스
• /
• 제7권4호
• /
• pp.121-128
• /
• 2003

A new textile material, poly(trimethylene terephthalate) polymer, has been introduced to the textile industry. The structure of PTT is similar to the PET, while the tensile deformation and subsequent recovery property is better than that of PET. In this study, the physical and mechanical properties of textile woven fabrics made of PTT, PET, and nylon 6 yarns as the filling yarn were determined using the Kawabata Evaluation System (KES), including tensile, bending, shearing, compression, and surface related parameters. On top of these measurements, the subjective ratings by evaluators were performed on the fabric samples. From the examination of the stress-strain behavior of the yarn specimens focused on the recovery mode, it was evident that the PTT specimen developed lower stress at 3% elongation. The subsequent recovery curve showed that the PTT has less stress-decay rate than the other specimens, implying that the recovery behavior of the PTT is recommendable for the end-uses including stretchable textile materials, sports wears, etc. The KES bending rigidity(B) value of the PTT sample fabric was lower than that of the PET sample fabric. Subjective evaluation of the fabric samples by the evaluators on the descriptive word pair "soft - not soft" showed similar tendency with the KES B determination of the fabric samples.

• 한국항공우주학회지
• /
• 제43권10호
• /
• pp.920-927
• /
• 2015

본 논문에서는 블레이드 해석 라이브러리를 통해 단면해석 및 응력복원 해석 결과를 VABS의 결과와 비교하였다. 강성 행렬로 연결된 1차원 보 모델을 가상일의 원리에 의해 계산된 에너지를 복원 이론에 기반한 차원 복원해석 과정을 통해 계산된 응력과 3차원 해석모델과 비교하였다. 블레이드 해석 라이브러리의 구성, 입력 및 출력 형태, 차원 축소와 복원을 통한 로터 블레이드의 구조해석 프로시져를 기술하고, 블레이드 해석 라이브러리의 검증은 고형모델, 박 벽 모델의 단면해석, 3차원 복합재료 유한요소 모델로 구성하여 VABS를 통하여 검증하였다. 차원 축소와 복원해석을 통하여 블레이드 해석 라이브러리는 복합재료 블레이드의 전후처리 프로그램와 연계되어 고고도 무인기, 로터 블레이드, 풍력 블레이드 및 틸트로터 블레이드의 모델링에 활용될 수 있을 것이다.

• 한국직업건강간호학회지
• /
• 제21권2호
• /
• pp.87-97
• /
• 2012

Purpose: This study was to examine the relationship between recovery experience and the burnout among hospital nurses. Methods: A cross-sectional survey design was used. The participants were 281 nurses working at three general hospitals located in Seoul and Gyeonggi Province. The data were collected by convenience sampling using self-reported questionnaires that consisted of general characteristics, burnout, recovery experiences, self-efficacy, social support, job demand and organizational system. The data were analyzed with descriptive statistics, t-test, ANOVA, correlation, and stepwise multiple regression. Results: Stepwise multiple regression showed that organizational system had the greatest impact on hospital nurses' burnout, followed by job demand, self efficacy, position and recovery experience. Conclusion: Recovery experience is found to be a new factor that influences the burnout among hospital nurses. Therefore, further research is needed for confirming that recovery experience influences the burnout of hospital nurses. Also there is a need to develop a program to increase recovery experience from job stress at the organizational level to reduce hospital nurses' burnout.

• 대한기계학회논문집A
• /
• 제24권9호
• /
• pp.2292-2301
• /
• 2000

We propose an accurate and efficient estimation method of transverse shear stresses for analysis and design of laminated composite structures by 4-node quadrilateral degenerated shell elements. To get proper distributions of transverse shear stresses in each layer, we use 3-dimensional equilibrium equations instead of constitutive equations with shear correction factors which vary diversely according to the shapes of shell sections. Three dimensional equilibrium equations are integrated through the thickness direction with complete polynomial membrane stress fields, which are recovered by REP (Recovery by Equilibrium in Patches) recovery method. The 4-node quadrilateral degenerated shell element used in this paper has drilling degrees of freedom and shear stresses derived from assumed strain fields that are set up at natural coordinate systems. The numerical results demonstrate that the proposed estimation method attains reasonable accuracy and efficiency compared with other methods and FE analysis using 4-node degenerated shell elements.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 추계학술대회 논문집
• /
• pp.267-270
• /
• 2003

In this paper, a new energy recovery circuit for AC PDP(Plasma Display Panel) is proposed to decrease a sustain voltage and voltage stress on switching elements. In the proposed circuit, two auxiliary capacitors are connected directly to the power source through switching elements and inductors when ground potential is supplied to the panel. Therefore, the voltage across auxiliary capacitors can be increased by turns over the half of the source voltage. Because the intrinsic capacitance of PDP is charged sufficiently from the auxiliary capacitors, the level of sustain voltage and the voltage stress on the switching devices are decreased. To verify the validity of the proposed energy recovery circuit, computer simulations using PSpice program are carried out.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.117-120
• /
• 1988

A new current source inverter (CSl) with dc-side commutation and load-side energy recovery circuit is proposed with analysis and explanation of the circuit operation. Proposed inverter overcomes the most drawbacks of the conventional CSI's - high device voltage stress, low operating frequency range, large commutation capacitance, etc. - by employing simultaneous recovery and commutation concept. The new CSI employs only one commutation capacitor and it can be built with considerably low cost. The commutation energies are temporarily stored into a large dc capacitor and recovered to the load side, thus the device voltage stress is low and the efficiency is high in the proposed inverter. Computer simulation results are given at the steady state, and a guideline determining the commutation circuit is given.

• Elastomers and Composites
• /
• 제40권4호
• /
• pp.258-265
• /
• 2005

스포츠화 중창용으로 사용되는 PU, IP 및 PH 등 세가지 종류의 발포체를 일정한 응력으로 반복압축한 후, 반복압축에 따른 발포체의 압축력, 영구변형, 회복력 등에 미치는 영향을 고찰하였다. 발포체의 반복압축에 따른 최대압축력은 PU의 경우는 거의 변화하지 않는 것으로 나타났으나 IP의 경우 최대 압축력은 크게 저하되었다. PU는 반복압축에 따른 발포체의 영구변형은 미소하였으나 PH의 경우 반복압축횟수가 증가함에 따라 현저하게 증가하는 경향을 나타내었다. 경도 45인 발포체를 5만회 반복압축 한 경우 발포체의 영구변형은 PU

• International Journal of Ocean System Engineering
• /
• 제1권1호
• /
• pp.9-15
• /
• 2011

This study examined the relationship between the scarf angle and stress distribution, and estimated the strength recovery via a finite element analysis. The following conclusions were drawn from this study. Resin will fracture due to a tensile load with a high scarf angle, which is similar to the patch repair method. An applied stress can be loaded to a repaired laminate if the scarf angle is $5^{\circ}$. The Von-Mises stress increases with decreasing scarf angle, with the exception of a scarf angle of $30^{\circ}$, where the scarf angle can indicate the rates of shear and normal stresses. Strength recovery can be better if the scarf angle is decreased to a lower angle. However, scarf machining requires more time, a high skill level and considerable expense. Therefore, a scarf angle of $5^{\circ}$ is the most effective for a repair. These results may provide a guide for engineers wishing to formulate a standard for repair. The scarf angle needs to be carefully managed for a more efficient composite repair.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.1097-1100
• /
• 2001

In this paper, the electro-chemical-machining characteristics of Ni-Ti Shape Memory Alloy(SMA) was investigated. From the experimental results, the optimal electro chemical machining conditions for satisfying the machining quality(fine surface & high recovery stress) might be confirmed. And it was concluded that optical electro chemical condition for Ni-Ti SMA could be obtained at approximately 100% current efficiency and high frequency pulse current.