• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.10
• /
• pp.1339-1344
• /
• 2010

MSM (Modal Superposition Method) is a technique for analyzing structural durability by taking the vibration characteristics into consideration. In this paper, MSR (Modal Stress Recovery) method, which is similar to MSM, was reviewed to check its validity as a durability analysis method. The MSR method directly calculates the modal displacement time history in multibody dynamics analysis; as a result, the total analysis time is shorter than that of MSM method. We conduct durability analysis using the MSR method and a durability test of a torsion beam axle that is affected by various road loads within the natural frequency of the beam axle. The analysis results for critical location and durability were in good agreement with the respective test results. Therefore, durability analysis using the MSR method is effective in predicting the durability of the structures of various dynamic systems.

• Journal of Fashion Business
• /
• v.7 no.4
• /
• pp.121-128
• /
• 2003

A new textile material, poly(trimethylene terephthalate) polymer, has been introduced to the textile industry. The structure of PTT is similar to the PET, while the tensile deformation and subsequent recovery property is better than that of PET. In this study, the physical and mechanical properties of textile woven fabrics made of PTT, PET, and nylon 6 yarns as the filling yarn were determined using the Kawabata Evaluation System (KES), including tensile, bending, shearing, compression, and surface related parameters. On top of these measurements, the subjective ratings by evaluators were performed on the fabric samples. From the examination of the stress-strain behavior of the yarn specimens focused on the recovery mode, it was evident that the PTT specimen developed lower stress at 3% elongation. The subsequent recovery curve showed that the PTT has less stress-decay rate than the other specimens, implying that the recovery behavior of the PTT is recommendable for the end-uses including stretchable textile materials, sports wears, etc. The KES bending rigidity(B) value of the PTT sample fabric was lower than that of the PET sample fabric. Subjective evaluation of the fabric samples by the evaluators on the descriptive word pair "soft - not soft" showed similar tendency with the KES B determination of the fabric samples.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.10
• /
• pp.920-927
• /
• 2015

In this paper, numerical results of sectional analysis and stress recovery were compared with the results of VABS through the blade analysis library. The results of recovery analysis for one-dimensional model including the stiffness matrix is compared with the calculated three-dimensional stress results of three-dimensionial FEM based on the principle of virtual work. We discuss the configuration of the blade analysis library and compare verifications of numerical analysis results of VABS. Blade analysis library through dimensional reduction and stress recovery is intended to be utilized in conjunction with pre- and post-processing of the analysis program of the composite blade, high-altitude uav's wing, wind blades and tilt rotor blade.

• Korean Journal of Occupational Health Nursing
• /
• v.21 no.2
• /
• pp.87-97
• /
• 2012

Purpose: This study was to examine the relationship between recovery experience and the burnout among hospital nurses. Methods: A cross-sectional survey design was used. The participants were 281 nurses working at three general hospitals located in Seoul and Gyeonggi Province. The data were collected by convenience sampling using self-reported questionnaires that consisted of general characteristics, burnout, recovery experiences, self-efficacy, social support, job demand and organizational system. The data were analyzed with descriptive statistics, t-test, ANOVA, correlation, and stepwise multiple regression. Results: Stepwise multiple regression showed that organizational system had the greatest impact on hospital nurses' burnout, followed by job demand, self efficacy, position and recovery experience. Conclusion: Recovery experience is found to be a new factor that influences the burnout among hospital nurses. Therefore, further research is needed for confirming that recovery experience influences the burnout of hospital nurses. Also there is a need to develop a program to increase recovery experience from job stress at the organizational level to reduce hospital nurses' burnout.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.9 s.180
• /
• pp.2292-2301
• /
• 2000

We propose an accurate and efficient estimation method of transverse shear stresses for analysis and design of laminated composite structures by 4-node quadrilateral degenerated shell elements. To get proper distributions of transverse shear stresses in each layer, we use 3-dimensional equilibrium equations instead of constitutive equations with shear correction factors which vary diversely according to the shapes of shell sections. Three dimensional equilibrium equations are integrated through the thickness direction with complete polynomial membrane stress fields, which are recovered by REP (Recovery by Equilibrium in Patches) recovery method. The 4-node quadrilateral degenerated shell element used in this paper has drilling degrees of freedom and shear stresses derived from assumed strain fields that are set up at natural coordinate systems. The numerical results demonstrate that the proposed estimation method attains reasonable accuracy and efficiency compared with other methods and FE analysis using 4-node degenerated shell elements.

• Proceedings of the KIPE Conference
• /
• 2003.11a
• /
• pp.267-270
• /
• 2003

In this paper, a new energy recovery circuit for AC PDP(Plasma Display Panel) is proposed to decrease a sustain voltage and voltage stress on switching elements. In the proposed circuit, two auxiliary capacitors are connected directly to the power source through switching elements and inductors when ground potential is supplied to the panel. Therefore, the voltage across auxiliary capacitors can be increased by turns over the half of the source voltage. Because the intrinsic capacitance of PDP is charged sufficiently from the auxiliary capacitors, the level of sustain voltage and the voltage stress on the switching devices are decreased. To verify the validity of the proposed energy recovery circuit, computer simulations using PSpice program are carried out.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.117-120
• /
• 1988

A new current source inverter (CSl) with dc-side commutation and load-side energy recovery circuit is proposed with analysis and explanation of the circuit operation. Proposed inverter overcomes the most drawbacks of the conventional CSI's - high device voltage stress, low operating frequency range, large commutation capacitance, etc. - by employing simultaneous recovery and commutation concept. The new CSI employs only one commutation capacitor and it can be built with considerably low cost. The commutation energies are temporarily stored into a large dc capacitor and recovered to the load side, thus the device voltage stress is low and the efficiency is high in the proposed inverter. Computer simulation results are given at the steady state, and a guideline determining the commutation circuit is given.

• Elastomers and Composites
• /
• v.40 no.4
• /
• pp.258-265
• /
• 2005

To study the compressive stress, recovery force and permanent strain of foams for footwear midsole, polyurethane(PU), phylon(PH) and injection phylon(IP) foams were repetitively compressed with constant compressive stress. Maximum compressive stress of PU did not decrease with repetitive compression on the constant compressive stress, but that of IP largely decreased. Engineering strain of foams were formed by repetitively compressing the three types of foam. The engineering strain of PU was smaller than that of IP and PH. Compressive stress and recovery force of IP and PH at certain strain were decreased with repetitive compression, but that of PU was not noticeably changed.

• International Journal of Ocean System Engineering
• /
• v.1 no.1
• /
• pp.9-15
• /
• 2011

This study examined the relationship between the scarf angle and stress distribution, and estimated the strength recovery via a finite element analysis. The following conclusions were drawn from this study. Resin will fracture due to a tensile load with a high scarf angle, which is similar to the patch repair method. An applied stress can be loaded to a repaired laminate if the scarf angle is $5^{\circ}$. The Von-Mises stress increases with decreasing scarf angle, with the exception of a scarf angle of $30^{\circ}$, where the scarf angle can indicate the rates of shear and normal stresses. Strength recovery can be better if the scarf angle is decreased to a lower angle. However, scarf machining requires more time, a high skill level and considerable expense. Therefore, a scarf angle of $5^{\circ}$ is the most effective for a repair. These results may provide a guide for engineers wishing to formulate a standard for repair. The scarf angle needs to be carefully managed for a more efficient composite repair.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.1097-1100
• /
• 2001

In this paper, the electro-chemical-machining characteristics of Ni-Ti Shape Memory Alloy(SMA) was investigated. From the experimental results, the optimal electro chemical machining conditions for satisfying the machining quality(fine surface & high recovery stress) might be confirmed. And it was concluded that optical electro chemical condition for Ni-Ti SMA could be obtained at approximately 100% current efficiency and high frequency pulse current.