• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.4
• /
• pp.460-466
• /
• 2019

It takes a lot of time and human resources to build a detailed three-dimensional finite element analysis model that is almost similar to the actual structure for sophisticated analysis, and a lot of experience and know-how is required to form a reliable analytical model. In this paper, the one-dimensional beam model connected by stiffness matrix through blade analysis library was compared with the results of three-dimensional analysis with the stress calculated through the process of dimensional restoration analysis based on the principle of virtual work. By comparing the stress calculated through dimensional restoration analysis with the three-dimensional analytical model, We will introduce the development status and application case of the blade analysis library by comparing efficiency and accuracy.

• Journal of Power Electronics
• /
• v.19 no.2
• /
• pp.353-362
• /
• 2019

To address the problem of circulating current loss in the traditional zero-current switching (ZCS) full-bridge (FB) DC/DC converter, a ZCS FB DC/DC converter topology and modulation strategy is proposed in this paper. The strategy can achieve ZCS turn on and zero-voltage and zero-current switching (ZVZCS) turn off for the primary switches and realize ZVZCS turn on and zero-voltage switching (ZVS) turn off for the auxiliary switches. Moreover, its resonant circuit power is small. Compared with the traditional phase shift full-bridge converter, the new converter decreases circulating current loss and does not increase the current stress of the primary switches and the voltage stress of the rectifier diodes. The diodes turn off naturally when the current decreases to zero. Thus, neither reverse recovery current nor loss on diodes occurs. In this paper, we analyzed the operating principle, steady-state characteristics and soft-switching conditions and range of the converter in detail. A 740 V/1 kW, 100 kHz experimental prototype was established, verifying the effectiveness of the converter through experimental results.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.12
• /
• pp.8-15
• /
• 2021

Cold forging is a method in which molding is performed at room temperature. It has a high material recovery rate and dimensional precision and produces excellent surface quality, and it is mainly used for the production of bolted or housing products. The lifespan of cold forging molds is generally determined by the wear of the mold, plastic deformation of the mold, and fatigue strength. Cold forging molds are frequently damaged due to fatigue destruction rather than wear and plastic deformation in a high-temperature environment as it is molded at room temperature without preheating the raw material and mold. Based on the results analyzed through FEM, an effective mold structure design method was proposed by analyzing the changes in tensile and compressive stresses on molds according to the number of molds and reinforcement rings and comparing the product geometry and mold stress using three existing mold models.

• Structural Engineering and Mechanics
• /
• v.88 no.6
• /
• pp.583-588
• /
• 2023

Total hip replacement is a crucial intervention for patients with fractured hips who face challenges in natural recovery. The design of durable prostheses requires a comprehensive understanding of the natural processes occurring in bone. This article focuses on static loading analysis, specifically during stumbling activity, aiming to enhance the longevity of prosthetic implants. Three distinct implants, Charnley, Osteal, and Thompson, were selected for a detailed study to determine the most appropriate model. The results revealed critical insights into the distribution of Von Mises stresses on the components of femoral arthroplasty, including the cement, implant, and cortical bone. Furthermore, the examination of shear stress within the cement emerged as a pivotal aspect for all three implants, playing a crucial role in evaluating the performance and durability of hip prostheses. The conclusions drawn from this study strongly suggest that the Thompson model stands out as the most suitable choice for hip joint implants.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.322-333
• /
• 2017

The purpose of this study was to examine the impact of the quality of life of emergency medical workers on their stress and job satisfaction. The subjects in this study were 209 selected emergency medical workers who worked shifts in the emergency medical centers of general hospitals located in two different provinces. A survey was conducted from March 1 to June 30, 2015. The collected data were analyzed by SPSS 20.0 for Windows usingfrequency analysis, factor analysis, Cronbach alpha coefficients, descriptive statistics, correlation analysis and multiple regression analysis. The findings of the study were as follows: First, the quality of life was correlated with stress and job satisfaction. Second, the quality of life was found to have affected the levels of physical and psychological stress(p<.001). Third, the quality of life was found to have exercised an influence on job satisfaction. Job satisfaction was under the significant influence of post-sleep recovery, difficulty in falling asleep, difficulty in getting up and difficulty in sleep maintenance. Fourth, psychological stress was found to have had a partial impact on job satisfaction(p<.01). Given the findings of this study, an appropriate increase in staffing and the guarantee of proper sleeping hours are necessary to improve the quality of sleep. Moreover, the development of programs that aim at relieving physical and psychological stress is required. Thus, various institutional measures should be taken to boost job satisfaction.

• Korean Journal of Community Nutrition
• /
• v.23 no.4
• /
• pp.289-301
• /
• 2018

Objectives: The aim of this study was to examine the current status of consumption of energy drinks among college students and investigate the effects of general environmental factors, health behavior factors, caffeine knowledge levels, and perceived stress levels on consumption of energy drinks. Methods: A survey was conducted among a total of 479 college students in Gwangju, using self-administered questionnaires. The questionnaire consisted of items about general environmental factors, health behavior, caffeine knowledge, perceived stress, and energy drink consumption behaviors. Results: 69.1% of participants experienced consumption of energy drinks, and specifically 82.8% of male students and 54.1% of female students experienced consumption of energy drinks (p<0.001). The reasons for drinking energy drinks were found to be recovery from fatigue, curiosity, taste, habit, thirst relief, and stress relief. In addition, 40.7% of participants experienced drinking energy drinks mixed with alcohol, and specifically 48.6% of male students and 27.4% of female students reported drinking energy drinks with alcohol (p<0.001). Moreover, 51.5% of participants responded that they experienced the effects of energy drinks, 31.9% reported experiencing adverse effects, and 41.1% were found to perceive the health risks. As a result of the assessment of caffeine knowledge, the participants showed a high level of knowledge of the arousal effect (77.7%) and the concentration increasing effect (70.8%) of caffeine, whereas they exhibited a low level of understanding of the health problems due to caffeine (32.6%) and adequate caffeine intake levels (24.4%). The higher levels of consumption experience of energy drinks was associated with higher body mass indexes (BMI) (p<0.01), higher academic years (p<0.01), lower levels of interest in health (p<0.05), smoking (p<0.001), alcohol consumption (p<0.05), and higher levels of perceived stress (p<0.05). Conclusions: The risk groups related to consumption of energy drinks among college students were identified as male students rather than female students, students in the third or fourth year of study associated with increased stress levels, and students with negative health behaviors. Therefore, support for diverse health and nutrition education for college students is required along with the improvement of internal and external environments of schools in order for college students to manage increased stress levels due to the schoolwork and preparation for employment and maintain positive health behaviors.

• Molecules and Cells
• /
• v.37 no.11
• /
• pp.833-840
• /
• 2014

Cullin4-RING ubiquitin ligase (CRL4) is a family of multi-subunit E3 ligases. To investigate the possible involvement of CRL4 in heat stress response, we screened T-DNA insertion mutants of putative CRL4 substrate receptors that exhibited altered patterns in response to heat stress. One of the mutants exhibited heat stress tolerance and was named heat stress tolerant DWD1 (htd1). Introduction of HTD1 gene into htd1-1 led to recovery of heat sensitivity to the wild type level, confirming that the decrease of HTD1 transcripts resulted in heat tolerance. Therefore, HTD1 plays a negative role in thermotolerance in Arabidopsis. Additionally, HTD1 directly interacted with DDB1a in yeast two-hybrid assays and associated with DDB1b in vivo, supporting that it could be a part of a CRL4 complex. Various heat-inducible genes such as HSP14.7, HSP21, At2g03020 and WRKY28 were hyper-induced in htd1-1, indicating that HTD1 could function as a negative regulator for the expression of such genes and that these genes might contribute to thermotolerance of htd1-1, at least in part. HTD1 was associated with HSP90-1, a crucial regulator of thermotolerance, in vivo, even though the decrease of HTD1 did not affect the accumulation pattern of HSP90-1 in Arabidopsis. These findings indicate that a negative role of HTD1 in thermotolerance might be achieved through its association with HSP90-1, possibly by disturbing the action of HSP90-1, not by the degradation of HSP90-1. This study will serve as an important step toward understanding of the functional connection between CRL4-mediated processes and plant heat stress signaling.

• Laboraroty Animal Research
• /
• v.34 no.4
• /
• pp.288-294
• /
• 2018

A few clues about correlation between endoplasmic reticulum (ER) stress and mulberry (Morus alba) leaves were investigated in only the experimental autoimmune myocarditis and streptozotocin-induced diabetes. To investigate whether a novel extract of mulberry leaves fermented with Cordyceps militaris (EMfC) could suppress ER in fatty liver, alterations in the key parameters for ER stress response were measured in high fat diet (HFD)-induced obese C57L/6 mice treated with EMfC for 12 weeks. The area of adipocytes in the liver section were significantly decreased in the HFD+EMfC treated group as compared to the HFD+Vehicle treated group, while their level was higher in HFD+Vehicle treated group than No treated group. The level of the eukaryotic initiation factor 2 alpha ($eIF2{\alpha}$) and inositol-requiring enzyme 1 beta ($IRE1{\alpha}$) phosphorylation and CCAAT-enhancer-binding protein homologous protein (CHOP) expression were remarkably enhanced in the HFD+Vehicle treated group. However, their levels were restored in the HFD+EMfC treated group, although some differences were detected in the decrease rate. Similar recovery was observed on the ER stress-induced apoptosis. The level of Caspase-3, Bcl-2 and Bax were decreased in the HFD+EMfC and HFD+orlistat (OT) treated group compared to the HFD+Vehicle treated group. The results of the present study therefore provide first evidence that EMfC with the anti-obesity effects can be suppressed ER stress and ER stress-induced apoptosis in the hepatic steatosis of HFD-induced obesity model.

• The Korean Journal of Pain
• /
• v.35 no.4
• /
• pp.423-432
• /
• 2022

Background: The decreased expression of mu-opioid receptors (MOR) in the amygdala may be a key molecular in chronic post-surgical pain (CPSP). It is known that miR-339-5p expression in the amygdala of a stressed rat model was increased. Analyzed by RNAhybrid, miR-339-5p could target opioid receptor mu 1 (oprm1) which codes MOR directly. So, the authors hypothesized that miR-339-5p could regulate the expression of MOR via targeting oprm1 and cause the effects to CPSP. Methods: To simulate perioperative short-term stress, a perioperative stress prolongs incision-induced pain hypersensitivity without changing basal pain perception rat model was built. A pmiR-RB-REPORT^TM dual luciferase assay was taken to verify whether miR-339-5p could act on oprm1 as a target. The serum glucocorticoid level of rats was test. Differential expressions of MOR, GFAP, and pERK1/2 in each group of the rats' amygdala were tested, and the expressions of miR-339-5p in each group of rats' amygdalas were also measured. Results: Perioperative stress prolonged the recovery time of incision pain. The expression of MOR was down-regulated in the amygdala of rats in stress + incision (S + IN) group significantly compared with other groups (P < 0.050). miR-339-5p was up-regulated in the amygdala of rats in group S + IN significantly compared with other groups (P < 0.050). miR-339-5p acts on oprm1 3'UTR and take MOR mRNA as a target. Conclusions: Perioperative stress could increase the expression of miR-339-5p, and miR-339-5p could cause the expression of MOR to decrease via targeting oprm1. This regulatory pathway maybe an important molecular mechanism of CPSP.

• The Journal of Engineering Geology
• /
• v.32 no.4
• /
• pp.643-659
• /
• 2022

Geologic sequestration technologies such as CCS (carbon capture and storage), EGS (enhanced geothermal systems), and EOR (enhanced oil recovery) have been widely implemented in recent years, prompting evaluation of the mechanical stability of storage sites. As fluid injection can stimulate mechanical instability in storage layers by perturbing the stress state and pore pressure, poroelastic models considering various injection scenarios are required. In this study, we calculate the pore pressure, stress distribution, and vertical displacement along a surface using commercial finite element software (COMSOL); fault slips are subsequently simulated using PyLith, an open-source finite element software. The displacement fields, are obtained from PyLith is transferred back to COMSOL to determine changes in coseismic stresses and surface displacements. Our sequential use of COMSOL-PyLith-COMSOL for poroelastic modeling of fluid-injection and induced-earthquakes reveals large variations of pore pressure, vertical displacement, and Coulomb failure stress change during injection periods. On the other hand, the residual stress diffuses into the remote field after injection stops. This flow pattern suggests the necessity of numerical modeling and long-term monitoring, even after injection has stopped. We found that the time at which the Coulomb failure stress reaches the critical point greatly varies with the hydraulic and poroelastic properties (e.g., permeability and Biot-Willis coefficient) of the fault and injection layer. We suggest that an understanding of the detailed physical properties of the surrounding layer is important in selecting the injection site. Our numerical results showing the surface displacement and deviatoric stress distribution with different amounts of fault slip highlight the need to test more variable fault slip scenarios.