• Development and Reproduction
• /
• v.13 no.3
• /
• pp.199-205
• /
• 2009

HSP70 has widely been induced in in vivo hyperthermia conditions in various organisms to study gene regulation and recently neuroprotectve roles of the induced gene expression under varying conditions. We investigated different responses among various tissues in zebrafish under heat shock to evaluate whether spatial and temporal expression pattern of zebrafish (z) hsp70 in transcriptional and translational level under heat shock stress in different brain regions. Heat shock groups were given for 1 h at $37^{\circ}C$ after recovery by transferring the treated animals back to $28^{\circ}C$ for 1, 2 and 24 h for recovery, respectively. Control (CTRL) group was kept at $28^{\circ}C$. At the end of treatments, five animals were collected and used for isolation of total RNAs and peptides from the corresponding tissues. Expression of zhsp70 mRNA showed different patterns in recovery periods in the tissues including the brain, eye, intestines, muscles, heart and testis by RT-PCR. Unlike the RT-PCR analysis, Northern blot analysis demonstrated nearly 30-fold increase in zhsp70 at 1 h heat shock, suggesting that RT-PCR may not be appropriate in unmasking regulation of the time-dependent zhsp70 expression. In the experiment involving different brain regions, the cerebellum showed gradual activation at 1 h to R1h and decreases in R2h and R24h, while the medulla oblongata and optic tectum showed gradual increase at R1h and decrease at R24h, indicating that different brain tissues respond specifically to heat shock in inducing zhsp70 and recovering from the heat shock status. Western blot analysis also demonstrated that the intracellular levels of zHSP70 in three different brain regions including the cerebellum, medulla oblongata and optic tectum are differently induced and recovered to normal state. These results clearly demonstrate that different regions of the body and the brain tissues are responding differently to heat shock in the aspects of its level of expression and speed of recovery.

• Textile Coloration and Finishing
• /
• v.7 no.4
• /
• pp.25-32
• /
• 1995

This study was carried out to examine the influences of fatigue and perspiration on the deterioration of chrome leather for shoes. The samples were treated with acidic and alkaline artificial perspirations and applied cyclic tensile stress, and the elastic recovery from fatigue strain, tensile strength and elongation, stiffness etc. by regions and directions were determined. The physical properties generally indicate considerable difference by regions and directions due to the thickness, entangling state, and arrangement direction of fiber buldles within the leather. By the treatment of artificial perspirations, the length, weight, strength, elastic recovery from fatigue of the lether are decreased and the thicknes, elongation, and stiffness are increased; and their extents by the alkaline perspiration are higher than those by the acidic one. The elastic recovery from fatigue of samples are decreased with increasing fatigue cylcle; and indicate regressive relations against the logarithm of the elapsed time, and the means of regression coefficients are 2.73 > 2.55 > 2.22 for samples treated by the acidic perspiration, untreated, and treated by the alkaline perspiration, respectively. The tensile strength is decreased and elogation is increased by fatigue, but the changes are diminished likely due to a rearrangment of fiber bundles with increasing fatigue cycle. And the samples become a little flexible immediately after fatigue; but stiffen again with elastic recovery from fatigue strain, consequently for some cases their stiffness after recovery are rather greater than those before fatigre.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.5
• /
• pp.653-658
• /
• 2013

For towing the new type armored vehicle and maintaining the close support, the armored recovery vehicle(ARV) with winch and crane has been developed. In case of crane, it is mainly used to salvage heavy objects by rotational and vertical motion. Especially, the crane bracket is very important parts due to fixing the ARV's body and rotary joint and preventing the force rotation of crane. Therefore, the crane bracket needs to have an enough strength to endure the high load and it is very important to analyze the stress distribution under loads. In the present work, the experimental and analytical investigation on structural integrity evaluation of crane bracket were carried out. The simulation of three-dimensional finite element method(FEM) was compared with experimental datum. From the numerical results, the FEM simulations corresponded well with th experimental results and the structural safety was confirmed by safety factor.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.4
• /
• pp.150-159
• /
• 2018

The present research deals with a finite element analysis and fatigue evaluation of a steam separator of a high-pressure evaporator for the Heat Recovery Steam Generator (HRSG). The fatigue during the expected life of the HRSG was evaluated according to the ASME Boiler and Pressure Vessel Code Section VIII Division 2 (ASME Code). First, based on the eight transient operating conditions prescribed for the HRSG, temperature distribution of the steam separator was analyzed by a transient thermal analysis. Results of the thermal analysis were used as a thermal load for the structural analysis and used to determine the mean cycle temperature. Next, a structural analysis for the transient conditions was carried out with the thermal load, steam pressure, and nozzle load. The maximum stress location was found to be the riser nozzle bore, and hence fatigue was evaluated at that location, as per ASME Code. As a result, the cumulative usage factor was calculated as 0.00072 (much less than 1). In conclusion, the steam separator was found to be safe from fatigue failure during the expected life.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.19 no.5
• /
• pp.375-380
• /
• 1990

It was attempted in this experiment to observe the effect of ginseng saponin on the growth and recovery rate of Saccharomyces rouxii which was shocked by heat-stress. The growth of S. rouxii was found most active when the saponin concentration in the malt extract broth was $10^{-3}%$ And the growth rate of S. rouxii grown on medium containing $10^{-3}%$ ginseng saponin was faster thanh that of the yeast grown on medium without saponin from the early log phase of the yeast. The growth recovery rate of S. rouxii which was heat-shockied by $80^{\circ}C$ - 30 minites was accelerated in the medium added ginseng saponin.

• International Journal of Concrete Structures and Materials
• /
• v.11 no.2
• /
• pp.365-375
• /
• 2017

An experimental evaluation of crack propagation and post-cracking behavior in steel fiber reinforced concrete (SFRC) beams, using full-field displacements obtained from the digital image correlation technique is presented. Surface displacements and strains during the fracture test of notched SFRC beams with volume fractions ($V_f$) of steel fibers equal to 0.5 and 0.75% are analyzed. An analysis procedure for determining the crack opening width over the depth of the beam during crack propagation in the flexure test is presented. The crack opening width is established as a function of the crack tip opening displacement and the residual flexural strength of SFRC beams. The softening in the post-peak load response is associated with the rapid surface crack propagation for small increases in crack tip opening displacement. The load recovery in the flexural response of SFRC is associated with a hinge-type behavior in the beam. For the stress gradient produced by flexure, the hinge is established before load recovery is initiated. The resistance provided by the fibers to the opening of the hinge produces the load recovery in the flexural response.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.9
• /
• pp.1159-1164
• /
• 2018

Vacuum circuit breakers(VCB) are widely used for current interruption of high-voltage inductive loads such as induction motors. This VCB can be chopped off before the current zero due to its high arc-extinguishing capability. One of the outstanding features of VCB is that it can cut off high frequency re-ignition current more than other circuit breakers. If the transient recovery voltage generated in the arc extinguishing is higher than the dielectric strength of the circuit breaker, a re-ignition phenomenon occurs. The surge voltage of the re-ignition is very high in magnitude and the steepness of the waveform is so severe that it can act as a high electrical stress on the winding. If the high frequency current of one phase affects the other two phases when the re-ignition occurs, it may cause a high surge voltage due to the virtual current chopping. If the magnitude of the voltage allowed in the motor winding is high or the waveform level is too severe, it may lead to insulation breakdown. Therefore, it is necessary to reduce the voltage to within a certain range. In this study, we briefly explain the various phenomena at the time of interruption, analyzed the magnitude of the dielectric strength and the transient recovery voltage at the simultaneous three-phase interruption that can give the greatest influence to the inductive load, proposed a method to reduce the impact.

• Journal of Fashion Business
• /
• v.18 no.3
• /
• pp.134-147
• /
• 2014

The aim of this study is to create smart wear that brings out the perspective person's individuality and creativity wearing these garments through various interactions. It is intended to build a prototype for a "Shape-folding Dress", which is length-adjustable skirt that responses with the environment of the wearer. In this process, four basic physical properties can be identified with fabric samples selected which are relatively stiff, including fusible interlining, organdy, silk, and ramie. In addition, two types of folding pattern specimens, "Basic Pattern" and "Diamond Pattern", and heat-steam were used to make the specimens so that the correlation could be calculated by recovery rate among flexing, stiffness and tensile properties. As a result, compared to other fabrics, the silk showed low stress to repeat folding and unfolding process, and its recovery rate of elongation deformation was stable without being affected by the different folding types and twice repeated process. In this study, forming a circuit using an Arduino, illuminance sensor, motors, and pulley, the prototype was created with a silk fabric.

• Structural Engineering and Mechanics
• /
• v.76 no.4
• /
• pp.505-512
• /
• 2020

This paper presents an error estimation technique for 2-D crack analysis by an enriched natural element (more exactly, enriched Petrov-Galerkin NEM). A bare solution was approximated by PG-NEM using Laplace interpolation functions. Meanwhile, an accurate quasi-exact solution was obtained by a combined use of enriched PG-NEM and the global patch recovery. The Laplace interpolation functions are enriched with the near-tip singular fields, and the approximate solution obtained by enriched PG-NEM was enhanced by the global patch recovery. The quantitative error amount is measured in terms of the energy norm, and the accuracy (i.e., the effective index) of the proposed method was evaluated using the errors which obtained by FEM using a very fine mesh. The error distribution was investigated by calculating the local element-wise errors, from which it has been found that the relative high errors occurs in the vicinity of crack tip. The differences between the enriched and non-enriched PG-NEMs have been investigated from the effective index, the error distribution, and the convergence rate. From the comparison, it has been justified that the enriched PG-NEM provides much more accurate error information than the non-enriched PG-NEM.

• Journal of the Korea Convergence Society
• /
• v.11 no.1
• /
• pp.327-335
• /
• 2020

The purpose of this study was to investigate conception of children's hospitalization stress and to make clear concepts, and to use Walker & Avant's concept analysis method. Children's hospitalization stress attributes were derived from physiological changes, individual-environmental interactions, cognitive and psychosocial developmental stage responses, and intrinsic and outward changes due to coping styles. The prerequisites for hospitalization stress of children were disease severity, biological factors, and support system, and the results were hospitalization adaptation, disease and health recovery, improvement of child development, and acquisition of coping skills. In order to solve the prerequisites for Hospitalization stress of children, it is necessary to be aware of the disease and to establish a support system of parent-family. Afterwards, we suggest more qualitative research on the hospitalization stress of children, the development of tools that reflect the characteristics of the hospitalization stress of children, and the development of programs to solve the Hospitalization stress.