• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 추계학술대회 논문집
• /
• pp.147-153
• /
• 2000

The fatigue crack propagation behavior of the SA516/70 steel which is used for pressure vessels was examined experimentally at room temperature, $150^{\circ}C$, $250^{\circ}C$ and $370^{\circ}C$ with stress ratio of R=0.1 and 0.3. The fatigue crack propagation rate da/dN related with the stress intensity factor range $\Omega\textrm{K}$ was influenced by the stress ratio within the stable growth of fatigue crack(Region II) with an increase in $\Omega\textrm{K}$. The resistance to the fatigue crack growth at high temperature is higher in comparison with that at room temperature, and the resistance attributed to the extent of plasticity-induced by compressive residual stress according to the cyclic loads. Fractographic examinations reveal that the differences of the fatigue crack growth characteristics between room and high temperatures are mainly explained by the crack closure and oxide-induced by high temperature.

• 한국해양공학회지
• /
• 제15권2호
• /
• pp.105-110
• /
• 2001

The fatigue crack propagation behavior of the SA516/70 steel which is used for pressure vessels was examined experimentally at room temperature, 150$^{\circ}C $, 250$^{\circ}C $ and 370$^{\circ}C $ with stress ratio of R=0.1 and 0.3. The fatigue crack propagation rate da/dN related with the stress intensity factor range $\Delta K$ was influenced by the stress ratio within the stable growth of fatigue crack(Region II) with an increase in $\Delta K$. The resistance to the fatigue crack growth at high temperature is higher in comparison with that at room temperature, and the resistance attributed to the extent of plasticity-induced by compressive residual stress according to the cyclic loads. Fractographic examinations reveal that the differences of the fatigue crack growth characteristics between room and high temperature are mainly explained by the crack closure and oxide-induced by high temperature.

• Structural Engineering and Mechanics
• /
• 제30권3호
• /
• pp.351-368
• /
• 2008

The purpose of this paper is to propose a simple analysis method of axial deformation of base-isolation rubber bearings in a building subjected to earthquake loading and present its applicability to the analysis of the bound of the aspect ratio of base-isolated buildings. The base shear coefficient is introduced as a key parameter for the bound analysis. The bound of the aspect ratio of base-isolated buildings is analyzed based on the relationship of the following four quantities; (i) ultimate state of the tensile stress of rubber bearings based on a proposed simple recursive analysis for seismic loading, (ii) ultimate state of drift of the base-isolation story for seismic loading, (iii) ultimate state of the axial compressive stress of rubber bearings under dead loads, (iv) prediction of the overturning moment at the base for seismic loading. In particular, a new recursive analysis method of axial deformation of rubber bearings is presented taking into account the nonlinear tensile behavior of rubber bearings and it is shown that the relaxation of the constraint on the ultimate state of the tensile stress of rubber bearings increases the limiting aspect ratio.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.443-452
• /
• 2005

The compaction pile methods with low replacement area ratio used sand(SCP) or gravel(GCP) has been usually applied to improvement of soft clay deposits. In order to design accurately compaction pile method with low replacement area ratio, it is important to understand the mechanical interaction between sand piles and clays and its mechanism during consolidation process of the composition ground. In this paper, a series of numerical analyses on composition ground improved by SCP and GCP with low replacement area ratio were carried out, in order to investigate the mechanical interaction between sand piles and clays. The applicability of numerical analyses, in which and elasto-viscoplastic consolidation finite element method was applied, could be confirmed comparing with results of a series of model tests on consolidation behaviors of composition ground improved by SCP. And,through the results of the numerical analyses, each mechanical behaviors of compaction piles and clays in the composition ground during consolidation was elucidated, together with stress sharing mechanism between compaction piles and clays.

• 오토저널
• /
• 제15권2호
• /
• pp.112-120
• /
• 1993

Variable thickness plates are commonly encountered in the majority of mechanical/structural components of industrial applications. And, as a result of the unsymmetry of the structure or the load and the anisoptropy of the materials, the cracks in engineering structures are generally subjected to combined stresses. In spite of considerable practical interest, however, a few fracture mechanics study on combined mode crack in a variable thickness plate have carried out. In this respect, combined mode 1/3 stress intensity factors $K_{1}$ and $K_{3}$ at the crack tip for a variable thickness plate were obtained by 3-dimensional finite element analysis. Variable thickness plates containing a central slant crack were chosen. the parameters used in this study were dimensionless crack length .lambda. crack slant angle .alpha, thickness ratio .betha. and width ratio .omega. Stress intensity factors were calculated by crack opening displacement(COD) and crack tearing displacement(CTD) method proposed by Ingraffea and Manu. The effect of thickness ratio .betha. on $K_{1}$ is relatively great in comparison to $K_{3}$.

• 한국해양공학회지
• /
• 제4권2호
• /
• pp.250-250
• /
• 1990

In this paper, fatigue tests were carried out at stress test levels of 461 MPa, 441 MPa, and 431 MPa by using smooth specimen of$2_{1/4}$ Cr-1 Mo steel with the stress ratio(R) of 0.05. The initiation, growth and coalescense process of the major cracks and sub-cracks among the fatigue cracks on the smooth specimen are investigated and measured under each stress level at a constant cycle ratio by the replica technique with optical microscope. Some of the important results are as follows: In spite of the difference of stress levels, the major crack data gather into a small band in the curve of surface crack length and crack depth against cycle ratio N/Nf. The sub-crack data, however, deviate from the band of the major crack. The growth rates, da/dN, of major and sub-crack plotted against the stress intensity factor range, ${\Delta}K$, have the tendency to be compressed on a relatively small band. But it is more effective to predict fatigue life through major cracks. The propagation behavior of surface microcracks on the smooth specimens coincides with that of the specimen having an artificial small surface defect or through crack.

• 한국환경복원기술학회지
• /
• 제10권1호
• /
• pp.82-90
• /
• 2007

In order to analyse the strength problems for an unsaturated soil, it is required to examine closely the characteristics of the parameters of shear strength which was changed with the metric suction and void ratio. To this ends, a triaxial compression test was conducted on the three samples-granular soil, cohesive soil and silty soil. The specimen was made by pressing the static pressure on the mold filled soil and was controled the void ratio with the different compaction ratio. And the test was performed by using the modified apparatus of the triaxial compression tester. The range of matric suction was 0-90 kPa.The measured results for the deviator stress and parameters of shear strength were analysed with the void ratio and the compaction ratio, and they were examined closely the characteristics of the strength for an unsaturated soil.

• 한국지반신소재학회논문집
• /
• 제16권3호
• /
• pp.63-74
• /
• 2017

쇄석다짐말뚝(GCP)은 수십 년 동안 사용되어 왔지만, 팽창, 전단파괴와 기타 현상과 같은 파괴가 여전히 발생하여 보다 정교한 연구가 필요한 실정이다. 본 연구에서는 선행연구 분석과 수치해석을 통해 치환율과 지반강도에 따른 응력 및 침하거동을 분석하고자 하였다. 이를 위해 유한요소해석 프로그램 ABAQUS를 사용하여 GCP로 개량된 복합지반을 모델링하여 지반강도와 치환율에 따라 복합지반의 응력과 침하를 분석하였다. GCP로 개량된 복합지반에 대하여 유한요소법을 이용한 수치해석을 실시하였으며, 치환율과 지반강도에 따른 복합지반의 응력관련계수와 침하저감계수의 관계를 분석하였다. 분석결과, 지반강도와 치환율이 증가할수록 깊이 별 평균 응력관련계수와 응력분담비는 증가하는 경향이 나타났다. 상부에서의 응력관련계수는 동일하게 증가하는 경향이 나타났지만, 응력분담비는 감소하였다. 따라서 상부층에서의 값은 다른 깊이에서의 값들과 다른 경향이 나타나므로 상부층에서의 측정된 값으로 복합지반 설계 시 과오를 범할 수 있으니 주의가 필요하다. 또한 기존 침하저 감계수식과 수치해석을 통한 침하저감계수와 비교 분석하였는데, 기존 식과 수치해석을 통하여 구한 값은 유사하게 나타났다.

• 동의신경정신과학회지
• /
• 제22권1호
• /
• pp.1-12
• /
• 2011

Objectives : This study was conducted to assess effects of oriental medicine music therapy on heart rate variability(HRV) in normal subjects under mental stress. Methods : 34 healthy volunteers(control group:17, experimental group:17) participate in this study. The volunteers were randomly allocated into two groups. After 10-minutes rest period and instrumentation, both groups performed a mental stress test for 12-minutes. HRV was recorded before and after the mental stress. And then the experimental group applied oriental medicine music therapy for 10-minutes. In the control group, they rested for 10-minutes. And HRV was recorded. Results : After giving mental stress stimulation to both groups, LF and LF/HF ratio were significantly increased and HF, mean HRV were decreased. In experimental group, LF, LF/HF ratio were significantly decreased and HF, SDNN were significantly increased after applying oriental medicine music therapy. In control group, LF was significantly decreased. And LF/HF ratio was decreased and HF, SDNN were increased, but it was not significant. Conclusions : This results show that oriental medicine music therapy could be relatively useful to decrease sympathetic activity and prevent the alteration of autonomic nervous system due to mental stress.

• 한국결정성장학회지
• /
• 제30권2호
• /
• pp.41-46
• /
• 2020

본 연구에서는 HVPE 성장법으로 GaN 성장 시 GaN 내에 잔류하는 stress로 인한 crack 현상을 감소시키고자 기판 종류 및 V/III 비를 조절하여 잔류 stress 특성을 알아보고자 하였다. Sapphire, GaN template 위에 각각 V/III 비 5, 10, 15의 조건으로 GaN을 성장시켜 형성된 hexagonal pit의 분포 및 깊이를 분석하였다. 이를 통해 GaN on GaN template 성장에서 V/III 비가 높을수록 hexagonal pit의 분포 영역 및 깊이가 증가하는 것을 확인하였다. Raman 측정을 통해 hexagonal pit 영역 및 깊이가 컸던 GaN on GaN template 성장에서 V/III 비가 높을수록 stress가 감소하는 것을 확인하였다. 이를 통해 hexagonal pit의 분포 및 깊이가 증가할수록 잔류 stress가 낮아짐을 확인할 수 있었으며, 향후 후막 GaN 성장 시 stress 감소 가능성에 대해 확인하였다.