FRP 이음방식에 따른 구조강도 특성에 관한 연구 (A Study on the Strength Characteristics of the FRP Bonding Method)
-
- 해양환경안전학회지
- /
- 제21권6호
- /
- pp.778-783
- /
- 2015
본 연구는 해상에서의 안전사고의 경감과 국민의 생명을 보호하기 위한 목적으로 자체 연구를 수행하여 FRP의 수리공법인 Butt Joint, Lap Joint, V-Scarf Joint(12t, 16t, 20t), X-Scarf Joint(12t 16t, 20t)의 인장강도와 굽힘강도를 통해 이음방식에 따른 구조강도 특성을 실험하였다. 이음 방법에 따른 인장강도와 굽힘강도의 시험편을 종합 분석한 결과, 인장강도의 강도와 굽힘강도의 그래프 패턴은 비슷한 양상으로 증가와 감소를 하였으며, 인장강도와 굽힘강도 모두 X-Scarf-Butt Joint-V-Scarf-Lap Joint 순으로 강도가 우수하였다. 인장강도는 강도특성이 가장 우수한 X-Scarf라 하더라도 Basic Material의 57% 수준의 강도를 나타내었고 굽힘강도는 X-Scarf가 Basic Material의 77% 수준의 강도를 나타내었다. 종합적으로 Over-Lay 구분을 포함하여 X-Scarf 12t 이음이 인장강도, 굽힘강도 특성이 우수하였으며 Lap Joint가 가장 좋지 않았다. Scarf 이음시 Taper 길이에 따른 강도의 차이는 V-Scarf 이음은 Taper의 길이가 가장 큰 20t가 인장강도, 굽힘강도 특성이 우수한 반면 X-Scarf 이음은 Taper의 길이가 가장 짧은 12t가 인장강도, 굽힘강도 특성이 우수하여 상반되는 결과를 나타내었다. 선박에는 많은 Stress가 작용하여 시험편만을 가지고 실험한 본 연구와 직접적인 비교는 힘들지만, 재료의 가장 기본 특성을 인장강도와 굽힘강도 시험을 통해 확인할 수 있다. FRP 국부적인 수리 방법인 Butt Joint, Lap Joint, V-Scarf, X-Scarf 4가지의 이음방법에 따른 시험값과 모재 대비 감소되는 비율을 제시하였고 추가적으로 V-Scarf와 X-Scarf의 Taper 길이별 특성을 12t, 16t, 20t로 구분한 결과값을 제시함으로써 수리 현장에서의 위치별 특성에 맞는 수리 방법의 응용이 가능하도록 하였다.
사설시조에서는 남성화자가 여성 님에 대한 그리움과 연모의 정을 토로하는 작품들이 급증하고 이 현상은 잡가에서 극대화된다. 이런 텍스트들은 근대 이후의 시에서 '여성예찬' 혹은 '여성의 초점화'와 같은 주제가 활성화되는 내적 토대가 되며 여성에 대한 당대의 시각변화를 반영하고 있어 사설시조가 내포하는 '근대성'을 규명하는 중요한 단서가 된다. '님'에 대한 애정을 노래한 사설시조는 애정의 성격에 따라 '상사형'과 '육정형'으로 나뉠 수 있는데 사설시조에서 특별히 부각되기 시작하는 유형은 '남성 상사형' 즉 남성화자가 여성 님에 대한 그리움을 노래하는 유형이다. 남성 상사형 사설시조는, 이전의 한국 시가의 전형적 패턴이 되어 온 '여성상사형' 즉 여성화자가 남성님을 향한 그리움과 연모의 정을 표현하는 유형과는 달리 ‘여성'이 발화와 가치의 중심에 놓인다는 특징을 지닌다. '상사형' 텍스트에서 '님'은 시적 화자에게 삶의 의미를 부여하는 가치의 총체이자 발화의 중심이 되는데 '남성 상사형'은 곧, 남성만이 차지하던 '님'의 자리에 여성도 위치하게 되었음을 알려주는 징표가 된다. 본고에서는 이를 '여성의 초점화'라는 용어로 포괄하여 사설시조 및 잡가를 통해 그 구체적인 양상을 살폈으며 근대 이후의 시에서 '마돈나' '그대' '당신'으로 지칭되는 여성 님의 존재를 부각시키는 내적 토대가 된다는 것을 검토하였다.
캐나다에서 화본과와 두과목초 및 사료작물은 가축사양에 있어서 주된 에너지 공급원이다 캐나다에 는 약 1,100만 ha의 개량초지와 조사료 생산은 가능하지만 환경조건이 다소 불량한 방대한 면적의 아직 개발되지 않은 3,000만 ha가 넘는 일반초지가 있다. 캐나다는 약 1,240만우의 육우와 약 150만두 의 젖소를 가지고 있다.캐나다 남부지역에서는 짧은 생육기간이 초지농업을 제한한다. 겨울은 길며, 대부분 지역은 저온, 결벙, 해벙 및 질병 등으로 사초의 월동은 큰 피해를 입고 있다 따라서 적응력 높은 품종의 개발은 양호한 초생유지를 위해 펼수적이며, 특히 생육기간이 짧은 불량 환경지대에서 그러하다. 건물생산은 초여름의 높은 생육에 비해 늦여름과 가을의 낮은 건물축적 양상으로 계절성을 나타낸다. 이러한 불균형적 생산형태를 극복하고 방목기간을 효과적으로 연장시키기 위해서는 혁신적인 관리 기술과 재생력이 우수한 품종개발이 필요하다. 초지의 생산성증대는 가축사육에 있어서 생산비를 절감 시키고 경쟁력을 갖추기 위한 중요한 부문을 차지한다. 유용한 기술의 적용은 초지의 생산성을 증진시키고 사내에서의 저장사료 사양의존도를 낮추며 소규모 농가들을 경제적으로 유리하게 해준다. 수확과 저장 및 사양과정에서 영양분 손실의 방지는 생산효율을 높이는데 펼수적이다. 사일리지 조제시에 도 생산비 절감과 생력관리기숭 개발은 조사료 위주 낙농엽의 생산효율을 높이고 순수익을 높이는데 큰 역할을 하고 있다. 축산업은 저지방이나 저콜레스테롤 식풍 같은 소비자의 가호성을 충족시키는 데에 지속적인 관심을 기울여야 하며, 연구와 교육 및 농민지도에 있어서 많은 어려움은 있으나 협력과 공동연구를 확대시켜 조사료 위주의 축산업을 발전시켜야 한다
본 연구는 대둔산 일지암 다정(茶庭)의 원형적 모습을 고찰한 것이다. 이를 위해 초의(艸衣) 등의 시문에 나타난 일지암의 공간구성과 정원요소를 현재의 그것과 비교함으로써 일지암 조영의 진정성을 강화하기 위한 방안 모색을 시도하고자 하였다. '초의(艸衣)'와 '일지(一枝)'라는 상징어는 물론 시문 속의 단서와 정황을 추적할 때 초의 생존시 소요(逍遙)와 선취(仙趣)를 꾀했던 자득(自得)의 터전이었던 일지암은 매우 고졸(古拙)하고 원대한 조망과 탈속(脫俗)의 미학을 갖춘 다정(茶庭)이었던 것으로 보인다. 일지암에 배치된 다천, 다조, 물확, 다림, 채원, 연지 등의 시설을 다산초당의 그것과 비교할 때, 차문화 공간으로서의 구성요소가 상호 일치하며, 이택(麗澤)을 꾀하기 위한 상 하지의 구성원칙이 동시에 발견된다. 일지암은 초의가 선과 차를 행하던 다선일여의 공간으로 장소성 역사성 조형성 경관성을 연계함으로써 복원의 진정성을 추구해야 할 것이다. 그러나 근년에 이루어진 진입로의 확장, 법당과 설림당 등의 대규모 불사(佛事)는 일지암의 왜소화와 다정으로서의 면모를 왜곡시키는 가장 큰 위협요인이 되고 있다. 특히 일지암과 주변을 시점장으로 하는 조망경관적 탁월성은 여러 시문에서 누차 강조되고 있음을 볼 때, 일지암 주변에 도사린 시각적 교란요인의 제거 및 저감은 일지암의 원형 보존을 위한 선결요인이다. 현존 일지암이 암자(庵子)라기 보다는 초정(草亭)과 같은 느낌을 준다는 견해에 대해서는 보완이 필요하다. 그러나 자우홍련사가 조선시대 누정건축 양식이 접목된 특수한 조형공간으로 불교적이라기보다는 다소 도교적이고 신선적 공간으로 보인다는 견해는 초의는 물론 교유자의 시에서 드러나는 유불융섭(儒彿融攝)의 사상과 은일자적 선취(仙趣)를 상기할 때, 확정적 고증자료가 발굴되지 않는 한 수용할 수준이라 판단된다. 결론적으로 1979년 복원된 일지암은 원형 복원이 아닌 장소 복원의 성격으로 이루어진 것으로, 국내 차문화 공간의 사례를 조합 유추하여 재건(再建)된 것으로 보인다. 아쉽게도 현재 건물 등의 골격이 왜곡되었다고 하더라도 원형복원을 위한 고증 자료가 부족하다. 그럼에도 불구하고 상 하지 연못은 방지(方池) 형태로 수정되어야 할 것으로 보며, 식생과 관련된 측면에서는 개선이 필요하다. 특히 설림당 주변 차밭 조성을 위해 제거된 것으로 보이는 죽림과 일지암 후면의 과원(果園) 조성, 상지 위 포도시렁의 설치, 소나무와 버드나무의 원내 도입 그리고 추녀 밑 다절구의 비치 등은 검토가 요망된다. 이 중 대부분의 시문에서 강조하고 있으며, 초의가 소중히 여겨 가꾼 죽림(竹林)은 다시 원내 적극 도입하는 방안이 강구되어야 할 것이다.
Historical interest in China in 1930s has been mostly focused on political characteristic of the National Government(國民政府) which was established by the KMT(中國國民黨) as a result of national unification. It is certain that China had a chance to construct a modern country by the establishment of the very unified revolutionary government. But, it was the time of expanding national crises that threatened the existence of the country such as the Manchurian Incident and the Chinese-Japanese War as well as the chaos of the domestic situation, too. So it has a good reason to examine the characteristic and pattern of the response of the political powers of those days. But, as shown in the recent studies, the manifestation method of political power by the revolutionary regime catches our attention through the understanding of internal operating system. Though this writing started from the fact that the Nationalist Government executed the administrative reform which aimed at "administrative efficiency" in the middle of 1930s, but it put stress on the seriousness of the problem and its solution rather than political background or results. "Committee on Administrative Efficiency(行政效率委員會)", the center of administrative reform movement which was established in 1934, examined the plan to execute the reform through legislation by the Executive Council(行政院) on the basis of the results of relevant studies. They claimed that the construction of a modern country should be performed by not political revolution anymore but by gradual improvement and daily reform, and that the operation of the government should become modern, scientific and efficient. There were many fields of administrative reform subjects, but especially, the field of records and archives adminstration(文書檔案行政) was studied intensively from the initial stage because that subject had already been discussed intensively. They recognized that records and archives were the basic tool of work performance and general activity but an inefficient field in spite of many input staff members, and most of all, archival reform bring about less conflicts than the fields of finance, organization and personnel. When it comes to the field of records adminstration, the key subjects that records should be written simply, the process of record treatment should be clear and the delay of that should be prevented were already presented in a records administrative meeting in 1922. That is, the unified law about record management was not established, so each government organization followed a conventional custom or performed independent improvement. It was through the other records administrative workshop of the Nationalist Government in 1933 when the new trend was appeared as the unified system improvement. They decided to unify the format of official records, to use marker and section, to unify the registration of receipt records and dispatch records and to strengthen the examination of records treatment. But, the method of records treatment was not unified yet, so the key point of records administrative reform was to establish a unified and standard record management system for preventing repetition by simplifying the treatment procedure and for intensive treatment by exclusive organizations. From the foundation of the Republic of China to 1930s, there was not big change in the field of archives administration, and archives management methods were prescribed differently even in the same section as well as same department. Therefore, the point at issue was to centralize scattered management systems that were performed in each section, to establish unified standard about filing and retention period allowance and to improve searching system through classification and proper number allowance. Especially, the problem was that each number system and classification system bring about different result due to dual operation of record registration and archives registration, and that strict management through mutual contrast, searching and application are impossible. Besides, various problems such as filing tools, arrangement method, preservation facilities & equipment, lending service and use method were raised also. In the process this study for the system improvement of records and archives management, they recognized that records and archives are the identical thing and reached to create a successive management method of records and archives called "Records and Archives Chain Management Method(文書檔案連鎖法)" as a potential alternative. Several principles that records and archives management should be performed unitedly in each organization by the general record recipient section and the general archives section under the principle of task centralization, a consistent classification system should be used by classification method decided in advance according to organizational constitution and work functions and an identical number system should be used in the process of record management stage and archive management stage by using a card-type register were established. Though, this "Records and Archives Chain Management Method" was developed to the stage of test application in several organizations, but it was not adopted as a regular system and discontinued. That was because the administrative reform of the Nationalist Government was discontinued by the outbreak of the Chinese-Japanese War. Even though the administrative reform in the middle of 1930s didn't produce practical results but merely an experimentation, it was verified that the reform against tradition and custom conducted by the Nationalist Government that aimed for the construction of a modern country was not only a field of politics, but on the other hand, the weak basis of the government operation became the obstacle to the realization of the political power of the revolutionary regime. Though the subject of records and archives administrative reform was postponed to the future, it should be understood that the consciousness of modern records and archives administration and overall studies began through this examination of administrative reform.
최근 무선통신 기기가 보편화됨에 따라 이로부터 발생하는 전자기파를 제어할 수 있는 방법에 대한 관심이 높아지고 있다. 전자기파 제어 물질로 가장 흔히 사용되는 것은 자성 물질이지만 제품에 적용 시 제품이 무겁고 두꺼워지는 특징 때문에 일반 전자기기에 사용하기에는 문제가 있어 이를 해결하기 위해 가볍고 두께가 얇은 고분자 유연메타 전자소자가 제시되었다. 또한 고분자 유연메타 전자소자는 단일 제품을 다양한 곡률에 적용할 수 있어 곡면 형상이 많은 전자기기에 사용하기에도 적합하다. 그러나 이러한 고분자 유연메타 전자소자를 곡면에 적용하기 위해서는 곡률변화에 따른 전자기파 제어 특성의 안정성 평가가 필수적으로 요구된다. 이에 본 연구에서는 도선 면적이 일정할 때 도선 길이에 따른 저항 변화율이 전자기파 제어 특성과 역의 관계라는 점을 활용하여 고분자 유연메타 전자소자의 전기적 특성 변화를 통해 전자기파 제어 특성을 예측할 수 있는 방법을 개발하였고, 이를 이용하여 고분자 유연메타 전자소자의 곡률 안정성 평가를 수행하였다. 그 결과 곡률 반경이 감소할수록 도선 길이에 따른 저항 변화율이 증가하였고, 곡률 유지 시간에 의한 변화는 없었다. 또한 곡면 적용 시 도선에 영구적인 변화와 곡면 제거 시 회복 가능한 변화가 복합적으로 발생하였고, 이러한 변화의 원인이 곡면 적용 시 가해진 인장응력에 의해 생성된 도선 내 수직방향 크랙이라는 사실도 밝혀냈다.
관광산업에서는 종사자들이 고객들과 직접 대면 접촉을 할 기회가 빈번하다는 점에서 감정노동과 관련된 문제가 발생할 가능성이 매우 높은 분야이다. 그렇지만 감정노동이 유사한 상황에서 항상 모두에게 동일한 형태로 인식되는 것은 아니다. 조사지에서 보는 것과 같이 감정노동은 개인의 특성과 사회문화적, 경제적 상황에 따라 다양하게 나타난다. 감정노동에 영향을 미치는 요소가 대단히 많고, 또 이런 요소들이 미치는 영향력의 수준은 시기와 장소에 따라 상이하게 표출될 수도 있다. 감정노동에 대한 생각이나 감정 노동으로 인한 스트레스 등 심리적, 정신적 고통은 여러 가지 요인에 의해 달라진다. 연령, 근무기간, 성별에 따라 감정노동에 대한 판단은 분명한 차이를 보인다. 특히 미국으로의 국제노동이주의 경험이나 향후에 국제노동 이주에 참여할 의사가 있는 사람들의 경우에는 감정노동을 심각한 문제로 인식하지 않거나 오히려 긍정적인 사회문화적 경험으로 받아들이는 경우가 많았다. 실제로 오아하카에 다양한 형태의 관광분야 종사자들이 존재하고, 이들이 겪는 경험은 개인과 경제적, 사회문화적 환경에 따라 매우 다르다. 오아하카의 관광 분야 종사자들의 감정노동도 여러 가지 조건에 따라 다양한 형태를 지니고 있다. 감정노동의 긍정적 혹은 부정적 인식과 결과는 개인과 작업조건의 상황에 따라 상이하게 표출된다. 즉 개인의 인성이나 경험, 사회문화적 특성, 작업장에서의 자율성 등 사회경제적 조건이 상당한 영향을 미친다. 결과적으로 개인에게 표현되고 이해되는 감정노동의 형태와 영향은 상당히 다양하고 상황에 따라 변화할 수도 있다. 이런 문제들을 고려하면 감정노동이 나타나는 방식은 경제적 요소 뿐 아니라 사회문화적 혹은 개인적 요소에 의해 상당한 영향을 받는다. 또 특정 업종이나 일의 성격에 따라 감정노동의 존재와 심각성을 주어진 것으로 간주하기보다, 개인에 따른 감정노동의 차이를 인지하고, 감정노동으로 인한 문제의 심각성을 경험하는 방식과 내용이 개인마다 상당히 다르다는 점도 함께 인식해야 한다. 이런 의미에서 감정노동의 역동성과 다양성, 다차원성을 분명하게 새로운 시각으로 파악할 필요가 있다.
NATM 터널의 갱구부와 갱내의 연약층 구간에는 굴착 보조공법으로 대부분 강관이나 유리섬유보강(Fiber-glass Reinforced Plastic)관에 의한 그라우팅공법이 적용되고 있다. RPUM이나 UAM으로 알려져 있는 이러한 공법으로 굴착전 막장면 천단을 선보강하여 굴착 시 주변지반의 안정을 확보할 수 있다. 특히 지반이 연약하여 자립이 어려운 경우 최근에는 막장면 천단 뿐 아니라 막장면 수평보강을 실시하여 터널 및 주변지반의 안정성을 확보하는 추세에 있다. 이러한 막장면 천단 및 수평보강 형태에 따른 보강효과는 현재 일부 수치해석적 방법과 실내 축소모형실험에 의해 연구된 바 있으나, 이러한 연구들은 복잡한 경계조건을 필요로 할 뿐 아니라 실제 터널굴착 및 보강단계를 적절히 모사할 수 없는 단점이 있다. 따라서 본 연구에서는 실제 RPUM시공을 재현하는 실대형 모형실험을 행하였다. 본 실험은 대형 토조를 제작하고 단계별 굴착과 상재하중을 재하하여 사질토지반 내 터널 천단보강 및 막장면 수평보강형태(무보강, 천단보강, 천단보강+막장면 수평보강, 막장면 수평보강)에 따른 막장면 주변지반 보강효과를 살펴보았다. 실험결과, 막장면 수평보강만으로도 주변지반 침하와 터널 반경방향 변위에 대한 상당한 억제효과를 확인할 수 있었다. 굴진방향과 평행한 종방향의 연직응력 변화를 측정한 결과 막장면 전방
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70