• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.717-724
• /
• 2003

Although sand compaction pile is applied considerably for increase of hearing capacity in domestic, it is getting more necessary to develope the alternative materials because of exhaustion and increase of unit cost of sand. In this study, stress concentration ratio between crushed-stone pile and soft ground was measured and, a displacement ratio 30, 40 and 50%, variation of stress concentration ratio was analyzed. As an increase displacement ratio, the stress concentration effect of crushed-stone compaction pile doesn't increase proportionally and effect of ground improvement in case of ground was good at displacement ratio 30% or 40%. The stress concentration ratio of crushed-stone compaction pile in group piles is 1.5 times that of crushed-stone compaction pile in single pile.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.966-973
• /
• 2005

The stress concentration ratio in accordance with area replacement ratios were considered as core elements of design. However, the stress concentration ratio will be vary depends on progress of consolidation in clay ground. And, since it is not sure to know the affecting factors accurately, the value is decided based on field experiences. To use SCP method more effective and correspond to soil improvement, the decision on proper area replacement ratio through the exact stress concentration ratio is very important. Accordingly, a numerical analysis on influence of various factors that needed to make rational designing guide for decision of proper area replacement ratio to stress concentration ratio was executed in this study.

• 한국지반공학회논문집
• /
• 제32권9호
• /
• pp.37-50
• /
• 2016

쇄석다짐말뚝(GCP)은 연약지반의 지지력 증가와 침하량의 감소를 실현할 수 있어 연약지반 개량에 활발하게 사용되고 있다. GCP 설계에 필요한 응력분담비는 치환율, 상재하중, 깊이 등에 따라 달라진다. 많은 연구자들이 현장실험, 실내실험, 수치해석 연구를 통해 쇄석으로 이루어진 GCP에 대해 치환율에 따른 응력분담비를 제시하였으나, 쇄석과 모래의 배합비에 따른 응력분담비에 관한 연구는 전무한 실정이다. 따라서 본 연구에서는 선행연구 분석과 수치해석을 통해 배합비와 치환율에 따른 응력분담비를 명확히 규명하고자 하였다. 이를 위해 유한요소해석 프로그램인 ABAQUS 6.12-4를 사용하여 GCP가 시공된 복합지반을 모델링하여 배합비와 치환율에 따라 복합지반의 과잉간극수압과 응력분담비를 분석하였다. 선행연구 분석결과, GCP 복합지반의 응력분담비에 관한 연구에서 일반적으로 현장에서 정재하시험, 실내시험, 수치해석을 통해 얻은 응력분담비는 각각 1.7~3, 2~7.5, 2~6.5 범위로 나타났으며, 쇄석과 모래의 배합비에 관한 연구에서는 일반적으로 클로깅현상을 저감시키기 위해 실내실험 한 결과로 쇄석과 모래의 최적배합비가 70:30으로 나타났다. 수치해석결과, 일반적인 GCP 복합지반의 치환율이 증가함에 따라 응력분담비가 치환율 30%까지는 증가하다가 40%에서는 다시 감소하는 경향이 나타났으며, 쇄석과 모래의 배합비에 따른 응력분담비는 일반적으로 모래의 함유량이 증가함에 따라 쇄석과 모래의 배합비가 70:30까지는 증가하다가 60:40 이후에 다시 감소하는 경향이 나타났다.

• 한국지반환경공학회 논문집
• /
• 제12권6호
• /
• pp.5-15
• /
• 2011

본 연구에서는 조립질 말뚝으로 개량된 점토지반의 응력변화 및 응력분담비의 변화를 파악하기 위하여 말뚝의 종류(GCP, SCP)와 하중재하조건, 치환율을 변화시키면서 원심모형실험을 수행하였다. 강성재하실험 결과, 동일 치환율에서 점토지반에서의 연직응력은 유사한 반면, 말뚝상부에서의 연직응력은 GCP로 보강한 경우가 SCP보다 크게 나타났다. 또한, GCP 및 SCP의 치환율이 증가할수록 평균 응력분담비가 거의 비례적으로 증가하였고, GCP로 개량된 경우 평균 응력분담비가 SCP로 개량된 지반에 비해 크게 평가되었다. 또한 연성재하 실험결과 쇄석다짐말뚝 및 모래다짐말뚝의 치환율이 40%인 경우가 가장 큰 응력분담비를 나타내었으며, GCP로 개량된 경우의 평균 응력분담비가 SCP를 설치한 경우보다 약간 크게 나타났다.

• 한국해안해양공학회지
• /
• 제16권1호
• /
• pp.18-26
• /
• 2004

SCP공법(Sand Compaction Pile Method)은 안벽구조물 하부 지반이 연약할 경우에 압밀침하 속도를 증가시키고, 침하를 감소시키며, 지지력을 증대시키기 위하여 널리 적용되어 왔다. SCP 개량지반은 연약지반에 타설된 모래말뚝과 주변 연약지반으로 구성된 복합지반을 형성한다. 이와 같은 복합지반의 설계 및 해석 시 가장 중요한 요소는 치환율에 따른 응력분담비이다. 본 연구에서는 수치해석기법을 사용하여 복합지반에 대한 응력분담비 특성을 검토하였다. 치환율에 따른 응력분담비는 상수 값이 아니라 연약지반의 깊이, 압밀과정에 의존한다. 또한 하중재하 단계에 응력분담비는 복합지반의 응력전이 특성에 의하여 증가하며, 재하 완료 직후에는 치환율에 따라 2.5∼12의 값을 가진다. 그러나 과잉간극수압이 소산되어 점토지반의 유효응력이 증가되는 압밀과정 동안에는 감소하여 압밀 완료 후에는 치환율에 관계없이 2.5∼6정도 범위로 수렴한다.

• Journal of Mechanical Science and Technology
• /
• 제18권5호
• /
• pp.808-813
• /
• 2004

The stress analysis on orthotropic composite cylindrical shells with one circular or one elliptical cutout subjected to an axial force is carried out by using an analytical and experimental method. The composite cylindrical shell governing equation of the Donnell's type is applied to this study and all results are presented by the stress concentration factor. The stress concentration factor is defined as the ratio of the stress on the region around a cutout to the nominal stress of the shell. The stress concentration factor is classified into the circumferential stress concentration factors and the radial stress concentration factors due to the cylindrical coordinate of which the origin is the center of a cutout. The considered loading condition is only axial tension loading condition. In this study, thus, the maximum stress is induced on perpendicular region against axial direction, on the coordinate. Various cutout sizes are expressed using the radius ratio, (equation omitted), which is the radius of a cutout over one of the cylindrical shell. Experimental results are obtained using strain gages, which are attached around a cutout of the cylindrical shell. As the result from this study, the stress concentration around a cutout can be predicted by using the analytical method for an orthotropic composite cylindrical shell having a circular or an elliptical cutout.

• 산업기술연구
• /
• 제22권A호
• /
• pp.185-192
• /
• 2002

The performance of old and the new concrete construction depends upon bond strength between old and the new concrete. Current adhesive and strength measurement method ignores the effect of stress concentration from shape of specimens. Therefore, this research calculates stress concentration coefficient as the ratio of drilling depth to drilling diameter($h_s/D$), the ratio of overlay thickness to drilling diameter($h_0/D$), the ratio of steel disk thickness to drilling diameter(t/D), the ratio of overlay elastic modulus to substrate modulus($E_1/E_0$), the distance from core to corner border(L_$_{corner}$) and the distance between cores(L_$_{coic}$) vary. The finite element method is adapted to analysis The results from 'the F.E.M analysis are as follows. The stress concentration effects can be minimized when the ratio of drilling depth to drilling diameter($h_s/D$) is 0.20~0.25, the elastic modulus ratio($E_1/E_0$) is 06~1.0, and the ratio of steel disk thickness to drilling diameter(t/D) is 3.0. The overlay thickness, the distance from specimens to corner border(L_$_{corner}$), the distance between cores(L_$_{coic}$) almost do not affect to the stress concentration.

• 한국공작기계학회논문집
• /
• 제12권4호
• /
• pp.63-69
• /
• 2003

In discontinuous composite mechanics, shear lag theory is one of the most popular model because of its simplicity and accuracy. However, it does not provide sufficiently accurate strengthening predictions in elastic regime then the fiber aspect ratio is small. This is due to its neglect of stress transfer across the fiber ends and the stress concentrations that exist in the matrix regions near the fiber ends. To overcome this shortcoming, a more simplified shear lag model introducing the stress concentration factor which is a function of several variables, such as the modulus ratio, the fiber volume fraction, the fiber aspect ratio, is proposed. It is found that the modulus ratio($E_f$/$E_m$) is the essential variable among them. Thus, the stress concentration factor is expressed as a function of modulus ratio in the derivation. It is found that the proposed model gives a good agreement with finite element results and has the capability to correctly predict the values of interfacial shear stresses and local stress variations in the small fiber aspect ratio regime.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1434-1437
• /
• 2003

Sometimes open holes are required for the function and the weight reduction of structure and machinery. However, the serious stress concentration occurs because of the geometric discontinuity caused by the holes and cutting section. In this study, it is attempted to obtain the stress concentration coefficients of the inner surface of the hole boundary by changing the position and the shape of holes on the homogeneous isotropic plate. And the effects on the plate are investigated. The results show that the stress level becomes low and the distribution area widens the position of stress concentration changes as the ratio a/b increases and change to a circle. And as the ratio a/l decreases, the stress concentration reduces. As the plate with three holes. the stress $\sigma$$\_$x/ and $\tau$$\_$xy/ of hole 1,3 becomes high, especially $\sigma$$\_$x/ dominant and high.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.833-836
• /
• 2002

Sometimes open holes are required for the function and the weight reduction of structure and machinery. However, the serious stress concentration occurs because of the geometric discontinuity caused by the holes and cutting section. In this study, it is attempted to obtain the stress concentration coefficients of the inner surface of the hole boundary by changing the position and the shape of holes on the homogeneous isotropic plate. And the effects on the plate are investigated. The results show that the stress level becomes low and the distribution area widens the position of stress concentration changes as the ratio ah increases and change to a circle. And as the ratio a/l decreases, the stress concentration reduces.