• Geomechanics and Engineering
• /
• v.22 no.2
• /
• pp.187-196
• /
• 2020

The changeable stress environment directly affect the propagation law of a stress wave. Stress wave propagation tests in sandstone with different axial stresses were carried using a modified split Hopkinson Pressure bar (SHPB) assuming the sandstone has a uniform pore distribution. Then the waveform and stress wave energy dissipation were analyzed. The results show that the stress wave exhibits the double peak phenomenon. With increasing axial stress, the intensity difference decreases exponentially and experiences first a dramatic decrease and then gentle development. The demarcation stress is σ/σ_c=30%, indicating that the closer to the incident end, the faster the intensity difference attenuates. Under the same axial stress, the intensity difference decreases linearly with propagation distance and its attenuation intensity factor displays a quadratic function with axial stress. With increasing propagation distance, the time difference decays linearly and its delay coefficient reflects the damage degree. The stress wave energy attenuates exponentially with propagation distance, and the relations between attenuation rate, attenuation coefficient and axial stress can be represented by the quadratic function.

• Geotechnical Engineering
• /
• v.4 no.4
• /
• pp.19-28
• /
• 1988

An underground explosion crests shock waves, which propagate to a buried structure through the이 ground. Due to the explosion, very high stresses and large deformation occur in the ground so that the shock waves decay gradually. In this study the numerical simulation of the ground shock attenuation has teen performed. One dimensional wave equation is presented and the finite difference method is applies. A Cap model is adopted to describe the stress-strain behavior of the ground. The results are expressed by the attenuation of the peak stress and the particle vrelocity by the time and the distance.

• The Korean Journal of Nuclear Medicine
• /
• v.32 no.1
• /
• pp.1-9
• /
• 1998

Gated myocardial SPECT and attenuation correction gave birth to new insights into the pathophysiology of ischemic myocardial perfusion and function in clinical routine practice. Gated myocardial Tc-99m-compound SPECT improved diagnostic accuracy of coronary artery disease and enabled us to observe motion and thickening of myocardial walls as well as myocardial perfusion at the same time. Quantitative and qualitative assessment of myocardial performance and perfusion let us to understand the myocardial physiology in ischemia and infarction. In every patient who underwent gated perfusion SPECT, we will find ejection fraction, left ventricular volumes and regional wall motion. There are hopes to use gated TI-201 SPECT for the same purpose and to use gated SPECT for evaluation of wall motion and thickening at stress or immediate post-stress. Attenuation correction could improve diagnostic accuracy mainly by increasing normalcy ratio or performance of non-expert physicians. Both gated methods and attenuation correction improved specificity of non-expert physicians in diagnosing patients with moderate pretest likelihood. New imaging techniques will fill the desire of cardiologists to examine function and perfusion, and possibly metabolism in their clinical routine practice.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.11 no.4
• /
• pp.71-77
• /
• 2001

In this paper, stress wave propagation characteristics of MR(Magneto-rheological) inserts are experimentally investigated. Generally, stress waves of structures such as warships or submarines are induced by shock waves from underwater explosion. Their fatal effects on the shipboard equipments or structures damage the performance of warships. But, such a problem can be solved by controlling the stress waves propagating through structures by means of MR inserts. MR insert consists of two aluminum layers and MR fluid filled in between. Two piezoceramic disks are embedded on the host plate as a transmitter and a receiver of stress waves. Pulse waves are generated by the transmitter and they reach to the receiver through the MR insert. Permanent magnet and magnetic coil are used to produce magnetic field at the MR insert. In the presence of magnetic field, MR particles are arranged in chains parallel to the magnetic field such that the transmitted stress waves are reduced. Attenuation of stress waves is experimentally investigated.

• Steel and Composite Structures
• /
• v.38 no.2
• /
• pp.141-150
• /
• 2021

In the present paper we have investigated the Stoneley wave propagation at the interface of two dissimilar homogeneous nonlocal magneto-thermoelastic media under the effect of hall current applied to multi-dual-phase lag heat transfer. The secular equations of Stoneley waves have been derived by using appropriate boundary conditions. The wave characteristics such as attenuation coefficients, temperature distribution and phase velocity are computed and have been depicted graphically. Effect of nonlocal parameter and hall effect are studied on the attenuation coefficient, phase velocity, temperature distribution change, stress component and displacement component. Also, some particular cases have been discussed from the present study.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.127-132
• /
• 2003

In a today industry, the welding is doing a many portion in structure manufacture. This study is simulated heat of heat-effected zone and researched a mechanical properties and ultrasonic characteristic in used the SS400 and the STS304. As the result mechanical properties of steel that become drawing decreased because of remaining stress by strain gardening according as simulated heat temperature rises, but according as temperature rises in material that do simulated heat after have done annealing, mechanical propensity was improved. The velocity and attenuation become different by effect of remaining stress than effect of material internal microstructure in ultrasonic wave test. In the case of STS304, there was change in mechanical properties by effect that is by strain hardening, but there was no change in material that simulated heat after annealing. When become drawing in ultrasonic waves test, according as simulated heat temperatures rise, change of attenuation coefficient is looked, but material that simulated heat after annealing was no change almost both the volocity and attenuation.

• BMB Reports
• /
• v.50 no.11
• /
• pp.539-545
• /
• 2017

The Integrated Stress Response (ISR) refers to a signaling pathway initiated by stress-activated $eIF2{\alpha}$ kinases. Once activated, the pathway causes attenuation of global mRNA translation while also paradoxically inducing stress response gene expression. A detailed analysis of this pathway has helped us better understand how stressed cells coordinate gene expression at translational and transcriptional levels. The translational attenuation associated with this pathway has been largely attributed to the phosphorylation of the translational initiation factor $eIF2{\alpha}$. However, independent studies are now pointing to a second translational regulation step involving a downstream ISR target, 4E-BP, in the inhibition of eIF4E and specifically cap-dependent translation. The activation of 4E-BP is consistent with previous reports implicating the roles of 4E-BP resistant, Internal Ribosome Entry Site (IRES) dependent translation in ISR active cells. In this review, we provide an overview of the translation inhibition mechanisms engaged by the ISR and how they impact the translation of stress response genes.

• Computers and Concrete
• /
• v.34 no.5
• /
• pp.519-534
• /
• 2024

Metaconcrete is a relatively new concept of concrete where traditional aggregates are partially replaced by resonant aggregates which consist of solid core coated with a relatively soft material. In this research, a mass-spring-mass analytical simplified model is used to predict the bandgap characteristics of metaconcrete firstly, then the bandgap characteristics of metaconcrete unit cell are numerically investigated by using finite element software COMSOL Multiphysics, the numerical model is built and verified by the analytical solution in terms of predicting bandgap frequency region. The effect of the parameters such as the modulus of coating, the density and radius of heavy core and resonant aggregate volume fraction on the characteristics of bandgap are studied based on validated finite element model. The vibration attenuation property of metaconcrete slab is studied by using the finite element code LS-DYNA and the effect of the parameters such as the modulus of coating, the density and radius of heavy core and resonant aggregate volume fraction. Metaconcrete slab exhibit prominent vibration attenuation capacity in the predicted bandgap. Finally, a frequency sweeping experiment is carried out to verify the theoretical model. The experimental results show that metaconcrete specimens exhibit excellent vibration attenuation ability in the predicting bandgap. The results can be used for designing engineered aggregates for better structural protection.

• Earthquakes and Structures
• /
• v.24 no.3
• /
• pp.193-204
• /
• 2023

The concept of meta-material-based isolation systems (MMIS) for structural columns has been revisited in the present study in order to enhance the stability of rubber pads by using steel shim reinforced rubber (SSRR) layers. Analytical calculations have shown a significant improvement in the stability of MMIS with SSRR pads. Finite element analysis has also been conducted to further show the reduced response of a bridge with the modified MMIS under excitations having frequencies within the corresponding attenuation zone (AZ) as compared to the response of a conventional bridge without MMIS. FE analysis further shows the stress generated on the bridge with MMIS systems are within safe limits. Finally, a generalized procedure has been developed to design bridge columns with the proposed modified MMIS.

• Journal of Nutrition and Health
• /
• v.22 no.2
• /
• pp.91-101
• /
• 1989

This study was performed to investigate the effects of different dietary magnesium levels on systolic blood pressure and mineral distribution in normotensive and spontaneously hypertensive rats. In experiment 1, Normotensive rats(NTR ; Sprague Dawley, Female) were given diets containing regular magnesium (0.05% Mg ; rMg), marginal magnesium (0.01% Mg ; mMg) or marginal magnesium with stress(0.01% Mg + stress ; mMg + Str). In experiment 2, spontaneously hypertensive rats (SHR ; Kyoto Wistar, Femal) were fed diets containing regular magnesium(0.05% Mg ; rMg) and high magnesium (0.2% Mg ; hMG). The following were found ; 1) NTR treated with marginal magnesium with stress showed significant increase in systolic blood pressure (SBP). Marginal magnesium diet without stress resulted in nonsignificant increase in SBP. Significant in crease of blood pressure showed in NTR treated with marginal magnesium and stress was associated with decreased magnesium and increased calcium content in femur, reticulocyte and plasma. 2) In experiment 2, magnesium supplementation to SHR showed significant attenuation of their systolic blood pressure with increasing age. The attenuation of SBP showed in SHR was associated with increased magnesium, lowered calcium content in cardiac muscle and reticulocyte and decreased plasma sodium and aldosterone level.