• 대한인간공학회지
• /
• 제12권2호
• /
• pp.63-83
• /
• 1993

The primary objective of the research is to develop a mathematical method to incorporate the variability of anthropometric body dimensions and joint strengths of individuals in a biomechanical analysis. A multivariate normal simulation model estimated anthropometric body dimensions and joint strengths of the random link-person, based on the assumptions that the vari- ables of body dimensions and joint strengths are correlated and follow normal distributions. Statistical comparative analysis demonstrated that the random link-person represented a more realistic human-like form in an anthropometric sense than the proportional link-person whose body dimensions were estimated proportionally. Estimated joint strengths for the random link-person, however, did not match the measured joint strengths as closely as the estimated body dimensions. The random link-person will allow biomechanical analysis of manual materials handling tasks to be individualized with respect to the anthropometry and a static strength.

• 터널과지하공간
• /
• 제7권3호
• /
• pp.221-229
• /
• 1997

Disc-type and ring-type specimens of four different materials were tested to investigate the tensile characteristics and their brief results are presented. Materials tested were marble, granite, cement mortar and plaster. Unizxial tensile strengths are compared with Brazilian and ring test strengths. It was found that Brazilian strengths were usually greater than uniaxial tensile strengths and affected by loading rates. In the ring tests, tensile strengths were generally found to be decreased as relative hole radius being increased. Ring test strengths, however, converged to some value in r$\geq$0.45 of marble, r$\geqq$0.29 of cement mortar and r$\leq$0.5 of plaster specimens. In such range of r, furthermore, transverse cracking of specimens were observed.

• Structural Engineering and Mechanics
• /
• 제68권3호
• /
• pp.289-297
• /
• 2018

The real behavior of the RC structures constructed based on the assumed specifications of the used materials is matched with the designed ones when the assumed and the applied specifications in construction are the same. Despite in the construction phase of the reinforced concrete (RC) structures always it is tried to implement the same specifications of materials as given in the executive drawings, but considering the unpredicted/uncontrolled parameters that affect the specification of materials, always there is a deviation between the constructed and the designed materials' specifications. The objective of this paper is to submit a guideline for the evaluation of the strength and damage to the existing RC structures encountered deviation in materials' strengths. To achieve this goal, the lateral strength (plastic behaviors) and damage to twenty-five RC moment-resisting frames (MRFs) are studied by applying the inelastic analysis. In this study, a couple of concrete and reinforcement strengths' deviations are investigated. The obtained results indicate that in general, there is a semi-linear relationship between the deviation in the strength of reinforcement and the changes in the lateral strength values of the MRFs. The relative effect of the deviation in the strength of reinforcements is more than the relative effect of the deviation in the concrete strength on the damage rate. The obtained results could be a guideline for the engineers in the survey of the existing buildings encountered deviation in materials' strengths during their construction phase.

• International Journal of Reliability and Applications
• /
• 제6권2호
• /
• pp.79-85
• /
• 2005

We show how comparative mean residual life functions (MRL) can be used to give unique insights into strengths of materials data. Recall that Weibull's original reliability function was developed studying and fitting strengths for various materials. This creative comparing of MRL functions approach can be used for regular life data or any time to response data. We apply graphical MRL's to real data from tests of tensile strength of high quality engineered wood.

• International Journal of Concrete Structures and Materials
• /
• 제10권sup3호
• /
• pp.109-121
• /
• 2016

Recently, as the use of high-performance materials and complex composite methods has increased, the need for advanced design specifications for steel-concrete composite structures has grown. In this study, various design provisions for ultimate flexural strengths of composite beams were reviewed. Design provisions reviewed included the load and resistance factor design method of AISC 360-10 and the partial factor methods of KSSC-KCI, Eurocode 4 and JSCE 2009. The design moment strengths of composite beams were calculated according to each design specification and the variation of the calculated strengths with design variables was investigated. Furthermore, the relationships between the deformation capacity and resistance factor for flexure were examined quantitatively. Results showed that the design strength and resistance factor for flexure of composite beams were substantially affected by the design formats and variables.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1301-1302
• /
• 2006

Sintered composites of Al-8wt%Cu-10vol%SiCp were deformed by repressing or equal channel angular pressing(ECAP) at room temperature, $500^{\circ}C$ and $600^{\circ}C$. Repressing produced more densification than ECAP but resulted in much lower transverse rupture strengths. In both cases, deformation at room temperature and $500^{\circ}C$, resulted in much lower strengths than deformation at $600^{\circ}C$, and also caused the fracturing of some SiC particles. The higher bend strengths and less SiC fracturing at $600^{\circ}C$ are attributable to the presence of an Al-Cu liquid phase during deformation. The employment of copper coated SiC instead of bare SiC particles for preparing the composites was found not improving the properties.

• 한국세라믹학회지
• /
• 제46권1호
• /
• pp.35-40
• /
• 2009

Using zirconia and poly (methyl methacrylate-coethylene glycol dimethacrylate) (PMMA) microbeads, macroporous zirconia ceramics were fabricated by a simple pressing method. Effects of template size and content on microstructure, porosity, and flexural and compressive strengths were investigated in the processing of the macroporous zirconia ceramics. Three different sizes of microbeads (8, 20, and $50{\mu}m$) were used as a template for fabricating the macroporous ceramics. The porosity increased with increasing the template size at the same template content. The flexural and compressive strengths were primarily influenced by the porosity rather than the template size. However, the strengths increased with decreasing the template size at the same porosity. By controlling the template size and content, it was possible to produce macroporous zirconia ceramics with porosities ranging from 58% to 75%. Typical flexural and compressive strength values at 60% porosity were ${\sim}30\;MPa$ and ${\sim}75\;MPa$, respectively.

• 콘크리트학회논문집
• /
• 제26권4호
• /
• pp.449-456
• /
• 2014

지오폴리머 반응은 매우 복잡하며, 플라이애쉬 화학조성, 입도분포, 자극제 농도와 종류, 양생온도, 양생시간 등이 지오폴리머 물성에 많은 영향을 미치고 있는 것으로 알려져 있다. 이 연구에서는 양생조건이 플라이애쉬 기반 지오폴리머 강도에 미치는 영향을 실험하기 위하여, 양생온도, 고온양생 전 전치시간, 고온에서의 양생시간 등을 변화시켜 양생조건 변화에 따른 지오폴리머 페이스트의 압축강도, SEM, 공극특성 등에 대하여 분석하였다. 실험 결과 양생온도가 높을수록 지오폴리머의 강도는 증가하였으며, 전양생시간이 길어질수록 지오폴리머 강도는 증가되었으나, 고온양생에서의 양생시간이 길어지면 압축강도가 저하현상이 관찰되었다. 고온에서의 양생시간이 길어지면 공극구조의 변화에 따라 강도 저하 현상이 관찰되었다. 따라서 양생온도와 양생시간은 지오폴리머 강도 및 미세구조에 큰 영향을 미치고 있는 것을 확인할 수 있었다.

• 대한소아치과학회지
• /
• 제27권2호
• /
• pp.237-245
• /
• 2000

최근의 심미적 수복재료는 단순히 글래스아이오노머나 레진으로 구분되지 않는다. 대신에, 이들은 두 가지 전통적 재료 사이의 광범위한 한 범주 내에 위치한다. 유치 수복 재료를 선택함에 있어 임상가는 각각의 상황에 적합한 몇 가지 항목들을 고려해야 한다. 이들 중 한가지가 결합력이다. 이 연구는 특별히 상아질과 법랑질과의 상대적 인장강도를 재료별로 비교해보고자 하였다. 실험재료로는 resin-modified glass ionomer로 Fuji II LC-I와 Vitremer를, compomer로는 Dyract AP, Compoglass F 2000등이 사용되었다. 140개의 발거된 유치를 실험대상으로 각 재료의 시편을 평활하게 연마된 법랑질과 상아질 표면에 제조회사의 지시대로 부착한 후 상아질과 법랑질에 대한 상대적 전단결합강도를 측정하였다. 파절편은 실패유형 평가를 위해 주의깊게 검사되었다. 실험결과는 one-way ANOVA& Sheffe's test와 student t-test(p=0.05)로 검증하였다. 본 연구의 결과는 다음과 같았다. 1. 유치 법랑질과 상아질에 대한 전단결합강도를 측정한 결과, 법랑질에 대해서는 Z100과 Fuji II LC-I에서, 상아질에 대해서는 Z100과 Dyract AP에서 가장 높은 결합력이 나타났으며 다른 재료간에는 유의한 차이를 관찰할 수 없었다(P>0.05). 2. 각 재료내의 법랑질과 상아질에 대한 상대적 결합력을 비교평가한 결과, Dyract AP와 Vitremer를 제외한 모든 재료에서 법랑질에서 보다 높은 결합력이 관찰되었으며, Dyract AP에서는 상아질에 대한 결합력이 법랑질에 대해서보다 높게 관찰되었다(P<0.05). 3. 각 재료들의 결합실패가 일어난 파절단면을 조직학적으로 관찰한 결과, 대부분 cohesive failure를 보였고, 파절면은 치면과 매우 근접해 있었다. 일부 화학중합형 glass ionomer cement와 Vitremer에서 adhesive failure가 관찰되었다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.50-53
• /
• 2000

The effect of punching density on the mechanical and thermal properties of nonwoven needle-punched carbon/phenol composite was studied. The carbonized preforms were farmed into composites with phenol resin. The interlaminar shear, tensile and flexural strengths were increased with increasing punching density. However, excessive punching density decreased interlaminar shear and tensile strengths. Erosion rate of carbon/phenol composite was decreased with increasing punching density