• Nuclear Engineering and Technology
• /
• v.2 no.4
• /
• pp.241-248
• /
• 1970

Neutron total cross sections of seperated isotopes were measured with the time-of-flight spectrometer at the 3 MeV Karlsruhe Van do Graaff Accelerator. The neutron energy ranged from 10 to 250 keV. The energy resolution was between 0.2 and 0.5 nsce/m. The measured cross sections were-shape-analyzed in terms of an R-matrix multilevel formula. Thus neutron widths and spins for up to 50 resonances per isotope could be determined. Average neutron widths, level densities and strength functions were derived. The spin dependence of strength functions and the distribution of widths and spacings were investigated.

• Structural Engineering and Mechanics
• /
• v.84 no.2
• /
• pp.239-251
• /
• 2022

The use of lateral reinforcement in confined concrete columns can improve bearing capacity and deformability. The lateral responses of lateral reinforcement significantly influence the effective confining pressure on core concrete. However, lateral strain-axial strain model of concrete columns confined by lateral reinforcement has not received enough attention. In this paper, based on experimental results of 85 concrete columns confined by lateral reinforcement under axial compression, the effect of unconfined concrete compressive strength, volumetric ratio, lateral reinforcement yield strength, and confinement type on lateral strain-axial strain curves was investigated. Through parameter analysis, it indicated that with the same level of axial strain, the lateral strain slightly increased with the increase in the unconfined concrete compressive strength, but decreased with the increase in volumetric ratio significantly. The lateral reinforcement yield strength had slight influence on lateral strain-axial strain curves. At the same level of lateral strain, the axial strain of specimen with spiral was larger than that of specimen with stirrup. Furthermore, a lateral strain-axial strain model for concrete columns confined by lateral reinforcement under axial compression was proposed by introducing the effects of unconfined concrete compressive strength, volumetric ratio, confinement type and effective confining pressure, which showed good agreement with the experimental results.

• Journal of Fashion Business
• /
• v.27 no.5
• /
• pp.1-12
• /
• 2023

The purpose of this study was to investigate impact of wearing low-level current wrist guards on pain scale, range of motion (ROM), and muscle strength in elderly women with Carpal Tunnel Syndrome (CTS). Subjects were 12 elderly women aged between 65 and 85 years who were diagnosed with CTS symptoms. Measurements included grip strength and wrist ROM. Wrist ROM was assessed through flexion and dorsiflexion. Wrist guards were worn. After two weeks, pain level was assessed using the Visual Analogue Scale (VAS). Results showed a significant reduction in VAS score in the MES group after stimulation, whereas there was no difference in the control group. However, there was no significant difference in ROM between the MES group and the control group. Grip strength increased in the MES group after two weeks (p ≤ 0.001). In conclusion, clinical trials suggest that MES wrist guards might be provided as an adjunctive treatment method for CTS patients. This study provides foundational data for the design and use of auxiliary devices such as gloves in the field of MES research for pain reduction, ROM improvement, and muscle strength enhancement resulting from CTS.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.2
• /
• pp.57-64
• /
• 2013

As the clothing materials have been more functional and advanced, the cotton fabrics for dress shirts or blouses have been more qualified and the sewability for high degree of completion has been required. This study aims to identify the seam strength depending on the change of stitch density of fine cotton fabrics by fabric and thread and so the general seam performance of fine cotton fabrics by analyzing the seam efficiency and breaking mode of seams. For an experiment, 3 kinds of fine cotton fabrics and 2 kinds of threads were selected and the sample was made by changing the stitch density by four steps. Then, the seam strength was measured. Next, the seam efficiency and breaking mode of seams were analyzed on the basis of the results of seam strength measurement. The results are as follows: All fabrics showed the similar tendency in seam strength. The seam strength is related to the tensile strength and thread strength, it increased only to a certain stitch density. When the stitch density exceeded a certain level, fabrics were destroyed or threads were cut. Then, the seam strength didn't increase. Furthermore, the more the seam strength increased, the more the seam efficiency increased. For increasing the maximum stitch density, it was required to use the fabrics and threads which had similar properties, in other words, the high thread strength for the high tensile strength and the low thread strength for the high tensile strength.

• Steel and Composite Structures
• /
• v.23 no.2
• /
• pp.239-250
• /
• 2017

In the concept of two-parameter fatigue failure criterion, the material fatigue failure is determined by the damage degree and the current stress level. Based on this viewpoint, a residual strength degradation model for stud shear connectors under fatigue loads is proposed in this study. First, existing residual strength degradation models and test data are summarized. Next, three series of 11 push-out specimen tests according to the standard push-out test method in Eurocode-4 are performed: the static strength test, the fatigue endurance test and the residual strength test. By introducing the "two-parameter fatigue failure criterion," a residual strength calculation model after cyclic loading is derived, considering the nonlinear fatigue damage and the current stress condition. The parameters are achieved by fitting the data from this study and some literature data. Finally, through verification using several literature reports, the results show that the model can better describe the strength degradation law of stud connectors.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.2
• /
• pp.83-87
• /
• 2010

Functional Concrete Added Titanium Dioxide(TIO2) for photocatalysis was about a result strength Reduction by recent studies. Therefore, The purpose of the study is to review the possibility of TIO2 for using concrete admixture. As a result, Nano TIO2 for concrete admixture helps increased strength of concrete and here are some of the details. The compressive strength and flexural strength of cement mortar added same amount of Nano SF and TIO2 for admixture were development of strength a certain level each other. when Nano admixture use 10%, SF and TIO2 showed development of strength 60% and 40% each other gradually. If I use over 10% Both SF and TIO2, they showed irregular strength variations.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• v.y2004m10
• /
• pp.55-58
• /
• 2004

This paper investigated the results of quality of concrete using mixed sand with grading adjustment in order to find out the applicability of fine aggregate with bad grading, According to test results, fluidity of concrete with fine level grading river sand was decreased while with coarse level grading crushed sand increased compared with that with medium level grading crushed sand. Use of mixed sand with grading adjustment(MSG) resulted in an improvement in fluidity. Increase in fineness modulus led to an increase in bleeding, For compressive strength, use of MSG increased compressive strength. For drying shrinkage, use of fine level grading river sand resulted in an increasing drying shrinkage due to the larger presence of fine particles, while use of MSG led to a reduction in drying shrinkage

• Journal of Family Resource Management and Policy Review
• /
• v.25 no.2
• /
• pp.79-93
• /
• 2021

This study explored how the family-friendly culture of married employees is related to family strength and verified the mediating effects of work-life balance in such a relationship. The study included 213 married employees aged from their 20s to their 60s. Statistical analysis was performed using SPSS 18.0, and the Baron and Kenny (1986) method was used to perform descriptive statistics, difference verification, regression analysis, and mediation analysis. The results of the analysis were as follows. First, the differences between the general characteristics of married employees and family strength were analyzed. Among the general characteristics, married employees in their 60s were found to have a higher level of family strength compared with other married employees in their 40s-50s and 20s-30s. Furthermore, married employees with higher education (higher than college or graduate school education), with supporters, with a household income of more than 6.01 million KRW, and with positions higher than middle management were found to have higher levels of family strength compared with their counterparts in each case. Second, hierarchical regression was performed to analyze the factors affecting family strength; the younger the age, the higher the level of family-friendly culture and work-life balance, and the higher the level of family strength of married employees. Third, according to Baron and Kenny's(1986) mediation analysis, the balance between work and life had a partial mediating effect on the relationship between a family-friendly culture and family strength. Therefore, a family-friendly culture and work-life balance were verified to be important factors that can serve as alternatives for improving the family strength of married employees.

• The Korean Journal of Emergency Medical Services
• /
• v.9 no.2
• /
• pp.129-136
• /
• 2005

The purpose of this study was to compare the level of physical fitness and isokinetic strength, between EMT student and physical education students. Nine a major in EMT student volunteers, and nine a major in physical education student volunteers participated in that study as subjects. The basic physical body composition, fitness and isokinetic strength were measured. The data obtained in the study was analyzed by SPSS PC+ for window version 10.0. The difference in the mean of each variable between the two groups was analyzed by using the independent t-test and the significance level for all analysis was set at <.05. The results were as follows ; 1. There was a significant difference in the basic physical fitness between the two groups with the exception flexibility. The difference showed the statistical significance on back strength, balance and power in physical education students. 2. There were significant difference in body composition between the two groups with the exception of lean body fat. The difference showed the statistical significance on body fat%, body fat mass in the physical education students. 3. There was significant defference in the isokinetic strength between the two group. The difference showed the statistical significance on peak torque, peak torque B/W%. It was concluded that the physical education students may not have an effect of flexibility; however, back strength, balance, power, body composition, isokinetic strength, could be enhanced due to the long-term period of training. Based on the findings of this study, the regular participation of regular exercise help the untrained men achieve health-related fitness.

• PNF and Movement
• /
• v.19 no.3
• /
• pp.331-340
• /
• 2021

Purpose: The purpose of this study was to investigate the differences in body composition, upper and lower limb muscle strength, and functional physical ability in urban-dwelling elderly women with or without obesity. Methods: All study participants were assigned to the normal weight group (n=8, BMI<25) and the obesity group (n=7, BMI>25) based on their obesity rate. Anthropometric measurement was conducted and body composition was measured. For the upper and lower limb strength, grip strength and maximal isometric knee extension and flexion were evaluated by a dynamometer. The senior fitness test was performed to measure functional ability. Data analysis was conducted by the independent t-test and the alpha level was set at 0.05. Results: The waist, hips, and thighs of obese elderly women were thicker than those of normal-weight elderly women. This physical difference resulted from body fat mass, not muscle mass. Despite a similar level of limb muscle mass between the two groups, the upper limb grip strength was higher (24.00% for left, 19.95% for right) in the normal-weight women than the obese women (p<0.05), but otherwise there was no difference in maximal knee flexion or extension isometric strength. Functional physical ability showed no difference in a 30-second chair sit and stand test and a six-minute walk test, but a 30-second arm-curl (11.00% for left, 14.81% for right), back stretch (8.54cm for left, 8.99cm for right), chair sit and reach (9.22cm for left, 6.24cm for right), and 2.44 meter round trip walk (0.62 sec, 9.39%) were faster in performance for normal-weight elderly women than obese elderly women (p<0.05). Conclusion: Taken together, despite similar levels of upper and lower extremity muscle mass, normal-weight elderly women showed higher performance in upper limb strength, flexibility, and agility than obese elderly women, but there was no difference in lower extremity functional muscle strength and cardiopulmonary endurance.