• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.4
• /
• pp.409-415
• /
• 2015

For the design of Concrete-Filled Steel Tube(CFST) columns, the outside diameter D to the steel tube thickness t ratio(D/t ratio) is limited to prevent the local buckling of steel tubes. Each design code proposes the respective model to compute the maximum D/t ratio using the yield strength of steel $f_y$ or $f_y$ and the elastic modulus of steel E. Considering the uncertainty in $f_y$ and E, the reliability index ${beta}$ for the local buckling of a CFST section can be calculated by formulating the limit state function including the maximum D/t models. The resulted ${beta}$ depends on the maximum D/t model used for the reliability analysis. This variability in reliability analysis is due to ambiguity in choosing computational models and it is called as "modelling uncertainty." This uncertainty can be considered as "non-specificity" of an epistemic uncertainty and modelled by constructing possibility distribution functions. In this study, three different computation models for the maximum D/t ratio are used to conduct reliability analyses for the local buckling of a CFST section and the reliability index ${beta}$ will be computed respectively. The "non-specific ${beta}s$" will be modelled by possibility distribution function and a metric, degree of confirmation, is measured from the possibility distribution function. It is shown that the degree of confirmation increases when ${beta}$ decreases. Conclusively, a new set of reliability indices associated with a degree of confirmation is determined and it is allowed to decide reliability index for the local buckling of a CFST section with an acceptable confirmation level.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.6
• /
• pp.731-737
• /
• 2016

To understand the characteristics and strength of the cold water that has caused damage to marine-culturing farms around Guryongpo, in the southwestern part of Korea, surface and water column temperatures were collected from temperature loggers deployed at a sea squirt farm during August-November 2007 and from a Real-time Information System for Aquaculture environment operated by NIFS (National Institute of Fisheries Science) during July-August 2015 and 2016. During the study period, surface temperature at Guryongpo decreased sharply when south/southwestern winds prevailed (the 18-26th of August and 20-22nd of September 2007 and the 13-15th of July 2015) as a result of upwelling. However, the deep-water (20-30m) temperature increased during periods of strong north/northeasterly winds (the 5-7th and 16-18th of September 2007) as a result of downwelling. Among the cold water events that occurred at Guryongpo, the mass death of cultured fish followed strong cold water events (surface temperatures below $10^{\circ}C$) that were caused by more than two days of successive south/southeastern winds with maximum speeds higher than 5 m/s. A Cold Water Index (CWI) was defined and calculated using maximum wind speed and direction as measured daily at Pohang Meteorological Observatory. When the average CWI over two days ($CWI_{2d}$) was higher than 100, mass fish mortality occurred. The four-day average CWI ($CWI_{4d}$) showed a high negative correlation with surface temperature from July-August in the Guryongpo area ($R^2=0.5$), suggesting that CWI is a good index for predicting strong cold water events and massive mortality. In October 2007, the sea temperature at a depth of 30 m showed a high fluctuation that ranged from $7-23^{\circ}C$, with frequency and spectrum coinciding with tidal levels at Ulsan, affected by the North Korean Cold Current. If temperature variations at the depth of fish cages also regularly fluctuate within this range, damage may be caused to the Guryongpo fish industry. More studies are needed to focus on this phenomenon.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.6
• /
• pp.514-520
• /
• 1992

Performance of direct seeded paddy rice in ridged dry soil was evaluated at different seeding methods (broadcasting, drilling, and seeding in group) and seeding rates (4, 6, and 8kg /10a). The number of maximum tillers at broadcasting and drilling of seeds was higher than that at seeding in group. At broadcasing and drilling the number of maximum tillers at seeding rate of 6kg /10a was greater than that at 4 or 8kg /10a, but at seeding in group the number of maximum tillers increased with seeding rates. Among the seeding methods there were no differences in the number of seedlings per unit area, culm and panicle lengths, and productive tiller ratio, but heading date at seeding in group was delayed by a day compared with broadcasting or drilling. At heading stage leaf area index(LAI) and dry matter production at broadcasting of seeds were higher compared with drilling and seeding in group, but light transmission ratio at drilling and seeding in group was higher than that at broadcasting of seeds. Although the number of seedlings increased with seeding rates, LAI and dry matter production at heading stage, culm and panicle lengths, and productive tiller ratio were not different among the seeding rates. There were no differences in the number of panicles and spikelets per unit area, 1,000 grain weight, yield, and harvest index among the seeding methods. The number of spikelets per panicle at seeding in group was higher, but percent ripened grains was lower compared with broadcasting and drilling. There were no significant differences in the number of panicles and spikelets per panicle and unit area, percent ripened grains, and harvest index among the seeding rates, but yield at seeding rate of 6kg /10a was higher than at 4 or 8kg /10a. There were no significant differences in tiller length, bending moment, and fresh weight of tiller among the seeding methods. Breaking strength was lower in the order of seeding in group, drilling, and broadcasting of seeds. However, lodging index was similar among the seeding rates and lodging was not occurred in the field. There was a significant interaction in the cellulose, hemicellulose, and lignin contents of culm base between seeding methods and seeding rates.

• Korean Journal of Food Science and Technology
• /
• v.26 no.4
• /
• pp.442-447
• /
• 1994

Effect of different mixing ratio of non-glutinous and glutinous rice on physical and rheological properties of extrudate prepared in a single screw extruder were examined. The extrusion conditions in term of screw speeds, moisture content and die temperature were 258 rpm, 18% and $120^{\circ}C$, respectively. The resisdence time distribution of the most of materials were within 30 second and small portion of them went up to 80 second. The expansion ratio was the highest value (2.93) for 70% of glutinous rice in the mixture, while the lowest value for 100% of non-glutinous rice. Breaking strength was in the range between 1,051g and 1,117g for $10{\sim}20%$ of glutinous rice in the mixture, while the lowest value (737g) for 80%r of glutinous rice. As the amount of glutinous rice increased, L and a values were increased and b value was decreased. The uncooked cold paste viscosity had 400 B.U. for 100% non-glutinous rice , while no peak for the 100% glutinous rice. As the amount of glutinous rice increased up to 100%, the water absorption index (WAI) was decreased, while water solubility index (WSI) was increased. The rheological properties of extrudate were accounted by the law of Oswald. The flow behavior index of extrudate was less than 1.0, which showed pseudoplastic behavior. Yield stress was the highest value for 20% of glutinous rice in the mixture and the lowest value for $80{\sim}100%$ of glutinous; rice. Number of air cell was between 128 and 159 for $80{\sim}100%$ of glutinous rice in the mixture, while $81{\sim}84%$ for $0{\sim}20%$ of glutinous rice. The degree of shapefact was increased more when the mixtures of glutinous and non-glutinous rice was used than when glutinous or non-glutinous rice was only used.

• Korean Journal of Poultry Science
• /
• v.29 no.1
• /
• pp.13-18
• /
• 2002

This study was conducted to investigate the effects of dietary activated coconut charcoal (ACC) on Performance, e99 quality and Plasma cholesterol level of Plasma in laying hens. One hundred forty four, 47-wk-old, ISA Brown commercial layers were used in a 28-d feeding trial after a 7-d adjustment Period. Four dietary treatments were 0, 0.5, 1.0 and 1.5e% levees of ACC supplemented to a corn-soybean meal basal diet. Egg Production was significantly increased as the levels of ACC increased. However, egg weight was significantly decreased by the addition of ACC in diets. Egg shell breaking strength tended to decrease as the level of ACC increased, however, no significance was found in this respect. As the levels of ACC increased, egg shell thickness decreased significantly. Although not significant, yolk color tended to increase by the addition of ACC. Egg folk index were significantly increased by the addition of ACC In diet. No significant difference was found among four treatments in total cholesterol, HDL cholesterol, and LDL+VLDL cholesterol concentrations in plasma. In conclusion, dietary supplementation of ACC to layer diets could be used to increase egg Production, and yolk index.

• The Journal of Korean society of community based occupational therapy
• /
• v.1 no.2
• /
• pp.31-43
• /
• 2011

Objective : The purpose of this case study was to proposed a introduction and result of the disabled with stroke in community using services of Community-Based Rehabilitation. Methods : The subject was a 63-years old female patient with stroke who first visit to Public health center in July. She was evaluated on activity daily living action level by using the Modified Barthel Index(MBI) and depression level by using Beck Depression Inventory(BDI). The intervention that was suggested by WHO were Community-Based Rehabilitation(CBR) and general occupational therapy. We were applied from April, 27th 2011, to November 30th, 2011 by occupational therapist. Results : The patient's total MBI score increased from 35 to 55, it means that activity daily living performance capacity was improved. And BDI score decreased from 26 to 14, it means that depressed symptoms were in great decline. She could stand until 5-10 minutes at first, but later stand over 30minutes now. It means her muscle strength and endurance level was increased. The patient's mood condition also was stabilized and then she often showed her smiling face during the therapy. And her protector feels the client's change too. Conclusion : We could know that function level and quality of life of the patient with stroke who return to the community was improved through service of community-based rehabilitation.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.4
• /
• pp.73-81
• /
• 2013

Ordinary least squares (OLS) regression is the primary statistical method in previous studies for vegetation distribution patterns in relation to landform. However, this global regression lacks the ability to uncover some local-specific relationships and spatial autocorrelation in model residuals. This study employed geographically weighted regression (GWR) to examine the spatially varying relationships between NDVI (Normalized Difference Vegetation Index) patterns and changing trends of landform (elevation, slope) and solar intensity (insolation and duration of sunshine) in Mt Geum-gang of North-Korea. Results denoted that GWR was more powerful than OLS in interpreting relationships between NDVI patterns and landform/solar intensity, since GWR was characterized by higher adjusted R2, and reduced spatial autocorrelations in model residuals. Unlike OLS regression, GWR allowed the coefficients of explanatory variables to differ by locality by giving relatively more weight to NDVI patterns which are affected by local landform and solar factors. The strength of the regression relationships in the GWR increased significantly, by showing regression coefficient of higher than 70% (0.744) in the southern ridge of the experimental area. It is anticipated that this research output will serve to increase the scientific and objective vegetation monitoring in relation to landform and solar intensity by overcoming serious constraints suffered from the past non-GWR-based approach.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.1
• /
• pp.78-85
• /
• 1992

This experiment was carried out to investigate the heritabilities, phenotypic correlation, genetic correlation and path-coefficients for desirable characters on the lodging related traits. Characters, that had high relation degree with field lodging degree, were rice-straw length, Wl /P, W/I, Wl /d, L, Wl / A, W/l, P, W $s^2$/ $l^4$ etc. Breaking strength appear negative correlation having an intention to field lodging. The second inertia moment of culm diameter trunk (branch), cross section area, rice-straw thickness and trunk cross section didn't appear negative coefficient with field lodging. It is considered that rice-straw length, leaf dry weight and lodging index, because of high heritability, become selection index of characters for breeding. In direct, indirect effect, and right rice-straw wall thickness appear largest( $P_{7y}$=0.6904), the next is the order of leaf dry weight( $P_{3y}$=0.2848), root dry weight ( $P_{1y}$=0.2658), culm diameter ( $P_{6y}$=-0.2280), and negative relation appear the order of rice-straw length ( $P_{5y}$=-0.9640) and stem dry weight( $P_{2y}$=-0.7072), therefore, the smaller culm length and stem dry weight, the stronger to lodging. to lodging.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.3
• /
• pp.292-298
• /
• 2016

In this research, considering the practical situation of separated placing method for mass concrete structure, an efficient method of controlling the heat of hydration is suggested by comparing between the simulated values and actual measurements conducted with the optimum mix design obtained from the various mix conditions with different types and amount of supplementary cementitious materials(SCMs). As the result of the research, firstly, the optimum mix designs for top and bottom layers were determined by Midas gen as OPC to FA of 85 to 15, and OPC to FA to BS of 50 to 20 to 30, respectively. The concrete mixtures prepared with the mix designs determined from the simulation satisfied the target performance range in slump, air content and compressive strength. Additionally, from temperature measurement for the actual mass concrete placed during spring, the maximum temperature difference between surface and core was about $10^{\circ}C$ with 59 and $49^{\circ}C$ for top and bottom layers, respectively, and 1.4 of cracking index was obtained. Therefore, considering the practical conditions of mass concrete construction, it is considered that the different heat of hydration method using different mix designs with SCMs can be an efficient method for controlling thermal cracking and settling cracking of mass concrete.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.4
• /
• pp.25-36
• /
• 1984

This paper checked up the safety criteria of the steel structural members by LRFD. And it calculated the resistance and load modulus for it by the proposed method, considering our circumstance, by establisting the taget relability index (${\beta}_0$), and compared their calculated modulus with the nominal safety factors of the road-bridge code and analyzed them. Uncertain quantity measurements fnr the resistance of the steel structural members and for the load effect are due to the method of the uncertain quantity analysis of the load and the resistance, of Galambos-Ravindra and SGST. The summary of the results is as follows: 1) Considering our circumstance, taget relibility index(${\beta}_0$) for current steel structural members are appropriate ${\beta}_0=3.5$. 2) Nominal resistance ${\Phi}^{\prime}$ of the strength design formula for 1) and nominal load modulus ${\gamma}_i^{\prime}$ are as follows; a) Both-sides support plate: ${\Phi}{^{\prime}}=0.75$, ${\gamma}_0{^{\prime}}=1.04$, ${\gamma}_L{^{\prime}}=2.08$ b) One-side support plate: ${\Phi}{^{\prime}}=0.82$, ${\gamma}_0{^{\prime}}=1.04$, ${\gamma}_L{^{\prime}}=2.11$.