• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.472-476
• /
• 2011

본 논문은 필라멘트 와인딩 압력용기의 섬유 강도 크기 효과에 관한 이론 해석 및 시험 결과를 제시하였다. 시험 방법은 카본-에폭시로 필라멘트 와인딩된 여러 크기의 후프 링 시험이 수행되었다. 시험 결과로부터 섬유 강도의 크기 효과가 현저하게 나타남을 알 수 있었다. 해석적 방법은 와이블 최약 파손 모델과 다 단계 연속 파손 모델을 이용하여 후프 링 시험 결과와 비교하였다. 해석 결과는 시험 결과와 비교하여 현저하게 낮은 섬유 강도 값들을 나타내었다. 그러므로 길이 방향의 크기 효과를 개선한 개선형 다단계 연속 파손 이론을 제시하였다. 개선형 다단계 연속 파손 이론으로부터 구한 섬유 강도 값들은 시험 결과들과 좋은 일치를 보였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.135-140
• /
• 1999

The size effect of axial compressive strength of concrete in notched specimens was experimentally investigated. Based on the concept of the fracture mechanics and size effect law, theoretical studies for axial compressive failure of concrete were reviewed, and two failure modes of concrete specimen under compression were discussed. In this study, experiment of axial compressive failure, which is one of the two failure modes, was carried out by using double cantilever fracture specimens. By varying the slenderness of cantilevers and the eccentricity of applied loads with respect to the axis of each cantilever, the size effect of axial compressive strength of concrete was investigated, and predicted by Bazant's size effect law. The test results show that size effect appears conspicuously for all series of specimens. For the eccentricity of loads, the influence of tensile and compressive stress at the notch tip are significant and so that the size effect is varied. In other words, if the influence of tensile stress at the notch tip grows up, the size effect of concrete increases. And the fact that the fracture process zone must be sufficiently secured for more accurate experiment was affirmed.

• Journal of Welding and Joining
• /
• 제33권4호
• /
• pp.44-49
• /
• 2015

The structural epoxy adhesive used in car body assembly needs the highest level of joint mechanical strength under lap shear, T-peel and impact peel conditions. In this study, the effect of nano functionalized block copolymer addition on the impact peel strength of epoxy adhesive was investigated. DSC analysis showed that the addition of nano functionalized block copolymer did not affect the curing reaction of epoxy adhesive. From single lap shear test, it was found out that the addition of nano functionalized block copolymer slightly decreased the cohesive strength of cured adhesive layer. The addition of nano functionalized block copolymer showed beneficial effect on T-peel strength by changing the adhesive failure mode to the mixed mode. However, the addition of nano functionalized block copolymer just decreased the room temperature impact peel strength. It was considered that the addition of nano functionalized block copolymer could have effect on disturbing the crack propagation only for the case of slow strain rate.

• 콘크리트학회지
• /
• 제10권6호
• /
• pp.179-190
• /
• 1998

철근콘크리트보의 전단파괴는 급작스런 취성파괴 때문에 중요한 문제이며, 많은 실험결과들에 의하면 철근콘크리트 보의 전단강도에서의 크기효과는 철근콘크리트 부재의 중요한 특징임이 밝혀졌다. 철근콘크리트보의 크기가 점점 커짐에 따라 실험이 매우 어려워져 전단강도에대한 실험데이타나 경험공식을 얻기가 힘들어지며 이에 다른 철근콘크리트 보의전단강도의 크기효과에 대한 수치해석적 방법이 매우 중요하게 되었다. 본 연구에서는 스터럽이 없는 철근콘크리트보의 전단해석에 유한요소해석기법을 적용하였고 전단강도에대한 크기효과를 해석적으로 분석하였다. 또한 철근콘크리트 보의 전단강도에대한 크기효과에 영향을 주는 인자를 분석하였으며 영향인자를 몇몇 표준시방서를 포함한 주요 전단강도식과 비교하였다.

• 콘크리트학회논문집
• /
• 제16권3호
• /
• pp.375-382
• /
• 2004

콘크리트의 압축강도는 콘크리트 구조물의 설계 시에 재료상수로 사용되는데 이 값의 산정에 사용되는 공시체의 크기 및 형상이 각 나라마다 다르므로 현재까지도 문제가 되고 있다. 본 연구에서는 콘크리트 공시체의 압축강도에 공시체의 크기와 형상이 미치는 영향을 파괴역학적 이론과 실험을 통하여 검토하였다. 콘크리트의 두 가지 파괴모드 중의 하나인 모드 I에 대한 실험이 원주공시체, 입방체, 그리고 각주를 이용하여 수행되었다 먼저 원주공시체, 입방체와 각주 자체의 크기효과와 이들 사이의 형상효과를 살펴본 후, 공시체의 크기, 형상, 및 타설방향에 대한 압축강도의 상호관계에 대하여 검토하였다. 또한, 입방체와 각주에 대하여 타설방향이 압축강도에 미치는 영향을 검토하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권2호
• /
• pp.357-364
• /
• 2001

This study deals with the effect on non-martensitic layer on the fatigue strength in carburized gear. The test gears are carburized, then treated by the combination of chemical polishing and electro-polishing. Carburization treatment is used widely on parts of power transmission system like surface hardened layer to improve fatigue strength. Carburized gears are observed using a scanning electron microscope(SEM) to determine the characteristics of crack initiation mechanism in the surface layer. The constant street amplitude fatigue test is performed by using and electro-hydraulic servo-controlled pulsating tester. The S-N curves are obtained and illustrated. The effect of non-martensitic layer on the fatigue strength is clarified.

• 한국해양공학회지
• /
• 제9권2호
• /
• pp.20-29
• /
• 1995

When structures are constructed by welding, structural elements are always accompained by welding residual stress and deformation. Therefore, when the rigidity and strength of the welded structures is considered, it is very important to have sufficient information about the effect of initial deflection and welding residual stress on them. In this paper, the square plates with welding residual stress under compression are dealt with; First, heat conduction and thermal elastic-plastic problems are analyzed by finite element method using 4-node isoparametric elements for assessment on the ultimate strength of welding joint. Later, the ultimate strength of welding joint is assessed by examining the effect of changed type of loading. The specimens are 500{\times}$500mm(a/b=1) and 750{\times}$500mm(a/b=1.5) rectangular plates of whichthicknesses is 9.0mm and simply supported plates getting axiul load in each direction.

• 한국생활과학회지
• /
• 제9권4호
• /
• pp.483-489
• /
• 2000

The purpose of this study is to verify the effect of cellulase treatment on crease resistance of cotton. Cotton fabrics was treated with cellulase under different concentration at $50^{\circ}C$ for 40 min. Also to compare the effect of DMDHEU treatment, DMDHEU treatment was conducted before and after cellulase treatment, also with cellulase. Weight loss, crease resistance and tentile strength of each samples were measured and compared. Maximum weight loss showed at 1g/l con. with 40 min. treatment. Cellulase enzyme treatment was more effective than DMDHEU in the crease resistance and tensile strength. Crease resistant of cotton which treated under different condition with cellulase and DMDHEU showed in the order of cellulase+DMDHEU> cellulase> DMDHEU treatment. Also, tensile strength showed in the order of cellulase> cellulase+DMDHEU> DMDHEU. Among those treatment conditions, condition which treated with cellulase considered more effective to increase crease resistance while keeping tensile strength too.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 추계 학술논문 발표대회
• /
• pp.113-114
• /
• 2016

In this study, various fats and oils were soaked in low-strength mortar to experiment what kind of fats and oils had the worst effect on low-strength mortar; it went as follows. For rate of change in length of fat and oil soaking, there was an increase in the order of pig fat, bio-diesel, grape seed oil, and water; in the case of olive oil it was destroyed within 56 days. For rate of change in mass, there was an increase in the order of bio-diesel, water, pig fat, grape seed oil, and olive oil. For relative motion elastic coefficient, there was a decrease in the order of olive oil, grape seed oil, and water. On the whole, pig fat, bio-diesel, and olive oil were shown to have the worst effect on low-strength mortar.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.959-963
• /
• 1996

Hardened layer and compressive residual stress created by carburized treatment effect on bending fatigue strength of gear massively. Also, shot peening treatment improves the strength of carburized gear as it does the hardness and residual stress of surface layer. In these days shot peening techniques are welcomed as one of physical improvement ways around the surface of materials. It is used widely because qualitative analysis of shot peening has become possible and surface treatment can be done with very little costs compared to other surface improvement methods. Therefore this study investigates the effect of shot peening in surface shape and bending fatigue strength after doing many kinds of shot peening treatments, then doing fatigue test and also explained characteristics of shot peening gear.