• 대한기계학회논문집A
• /
• 제24권7호
• /
• pp.1697-1702
• /
• 2000

This study has been performed to investigate the effects of glass fiber characteristics on the mechanical properties of thermoplastic composite. The surface of glass fiber was coated with the silan e to enhance the bonding strength between fiber and matrix. A micro-droplet pull-off test was performed to investigate the influence of the silane concentration on the bonding strength. The maximum bonding strength was observed around 10.8% silane concentration. In order to examine the influence of the fiber length and fiber content on the properties of the composite, the composite materials involving tile fiber lengths of 5mm, 10mm, 15mm 20mm, and 25mm were tested. The composites used contain 20%, 30%, and 40% by weight of glass fibers. Tension and flexural tests were performed to investigate their mechanical properties of the composites. The tensile strength and tensile modulus of the composite increase with increasing the glass fiber content. The tensile modulus increases slightly with increasing the fiber length. The maximum tensile strength is observed around the fiber length of 15-20mm. The flexural modulus and strength also increase slightly with increasing the fiber length.

• 한국농공학회논문집
• /
• 제60권1호
• /
• pp.101-110
• /
• 2018

This study experimentally investigated the compressive and flexyral strength development characteristics of polymer concrete using four different type polymeric resins such as unsaturated polyester, vinyl ester, epoxy, and PMMA (polymethyl methacrylate) as binders. The test results show that the average compressive strength of those four different polymer concretes was 88.70 MPa, the average flexural strength was 20.30 MPa. Those test results show that compressive and flexural strengths of polymer concrete were much stronger than compressive and flexural strengths of ordinary Portland cement concrete. In addition, the relative gains of the compressive strength development at the age of 24 hrs compared to the age of 168 hrs were 68.6~88.3 %. Also, the relative gains of the flexural strength development at the age of 24 hrs compared to the age of 168 hrs were 73.8~93.4 %. These test results show that compressive and flexural strengths of each polymer concrete tested in this study were developed at the early age. Moreover, the prediction equations of compressive and flexural strength developments regarding the age were determined. The determined prediction equations could be applied to forecast the compressive and flexural strength developments of polymer concrete investigated in this study because those prediction equations have the high coefficients of correlation. Last, the relations between the compressive strength and the flexural strength of polymer concrete were determined and the flexural/compressive strength ratios were from 1/4 to 1/5. These results show that polymer concretes investigated in this study were appropriate as a flexural member of a concrete structure because the flexural/compressive strength ratios of polymer concrete were much higher than the flexural/compressive strength ratios of Portland cement concrete.

• 한국산학기술학회논문지
• /
• 제13권6호
• /
• pp.2664-2671
• /
• 2012

본 연구는 노인들의 신체적 특성이 보행 속도에 어떠한 영향을 미치는지 알아보기 위하여 시행되었다. 연구대상자는 보조도구의 사용에 관계없이 독립보행이 가능한 노인 77명(남 38명, 여자 39명)을 대상으로 하였다. 상관분석과 단계적 다중 선형 회귀분석을 사용하여 신체적 특성(연령, 성별, 신장, 체중, 신체질량지수, 근육량, 허리/엉덩이둘레비, 심박수, 폐활량, 유연성, 최대산소섭취량, 눈감고 한발 서기)과 하지 근력(슬관절 신전근, 슬관절 굴곡근)이 보행 속도와 어떠한 관련성이 있는지 분석하였다. 보행 속도는 연령, 신장, 폐활량, 눈감고 한발 서기 시간, 슬관절 굴곡근 및 신전근의 근력과 상관관계가 있었다. 또한 슬관절 굴곡근에 의해 보행 속도는 27%로 설명력을 가지고 있었으며, 슬관절 신전근 변수가 추가되었을 때 설명력은 32%로 높아졌다. 이러한 결과는 노인의 보행 속도가 하지의 근력과 다양한 신체적 특성에 영향을 받는다는 것을 의미한다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.689-696
• /
• 2003

In this study, ordinary portland cement, slag cement and micro cement which have been used in the construction fields were evaluated for the environmental effects and compression strength characteristics for curing solution. To find the leaching of C $r^{6+}$ characteristics in cement grouts, C $r^{6+}$ content tests were performed for the raw materials(cement powder). In addition, C $r^{6+}$ leaching tests were peformed for the homo-gel samples according to change of pH and each curing solution with the deionized water and leachate. Then, the unconfined compression strength tests were peformed with the homo-gel samples and the amount of changed C $r^{6+}$ was measured by curing solution.

• 한국환경복원기술학회지
• /
• 제4권3호
• /
• pp.49-54
• /
• 2001

It is common that the soil layer is a few meters below the earth's surface and the rock mass is below the soil layer in the view of geological characteristics in Korea. And the boundary between rock and soil is clearly divided. When dealing with the stability of rock masses, as in the case of rock slopes or dam foundations, the majority of the collapses is not within the soil layer, but within the soil-rock boundary. Therefore it is important to identify the shear strength characteristics between soil-rock boundary. And then in the method of reinforcement on landslide this chose a cut slope near Daemo elementary school in Seoul, surveyed shear strength between soil-rock contacts and considered a large scale collapse using a limit equilibrium method.

• Geomechanics and Engineering
• /
• 제6권5호
• /
• pp.437-453
• /
• 2014

This paper studies the swelling and strength characteristics of unimproved and improved expansive soils in terms of the swell potential, swelling pressure, rate of secondary swelling, unconfined compressive strength and California bearing ratio (CBR). The admixtures used in this study are locally available cement and fly ash. The soils used in this study were taken from the Mae Moh power plant, Lampang Province, in northern Thailand. A conventional consolidation test apparatus was used to determine the swelling of the soil specimen. The optimum admixture contents are determined to efficiently reduce the swelling of unimproved soil. The rate of secondary swelling for unimproved soil is within the range of highly plastic montmorillonite clay, whereas the specimens improved with optimum admixture contents can be classified as non-swelling kaolinite. A soil type affects the swelling pressure. Expansive soil improvement with fly ash alone can reduce swelling percentage but cannot enhance the unconfined compressive strength and CBR. The strength and swelling characteristics can be predicted well by the swelling percentage in this study.

• 대한토목학회논문집
• /
• 제14권1호
• /
• pp.195-202
• /
• 1994

본 연구에서는 모래의 전단파괴 포락선의 곡률특성을 구명하고 전단강도와 Been과 Jefferies가 제시한 상태정수간의 매개변수관계를 밝히기 위하여 많은 압밀배수삼축시험의 결과를 분석하였다. 통상적인 삼축시험에서 시료의 단면적 변화와 멤브레인의 영향에 대한 수정은 특히 한계상태를 결정하는데 중요하다고 할 수 있다. 실험결과로부터 전단강도를 밀도와 응력수준의 함수로 표현하는 모델을 제시하였고 모래의 전단파괴포락선의 곡률특성과 상태정수와 전단강도정수간의 관계를 밝혔다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.82-89
• /
• 2004

To secure stability and availability of Rammed Aggregate Pier method as the foundation of a structure, the shear strength characteristics according to the area replacement ratio of RAP and the relative density of in-situ ground was studied through soil laboratory tests and large direct shear tests in a model ground. As a result, the internal friction angle tends to increase in proportion to in-situ relative density(Very Loose, Loose, Medium) in composite ground formed by the same area replacement ratio of RAP and also increase in proportion to increasing the area replacement ratio(30, 40, 50%) of RAP in the same ground condition. Furthermore, the comparative analysis between the experimental value and theoretical value of the shear strength is carried out.

• 한국해양공학회지
• /
• 제9권1호
• /
• pp.47-56
• /
• 1995

This study is aimed to have a database of system development for the prediction, monitoring, analyzing, and evaluation of tensile strength and damage characteristics through AE technique for CFRP. Therefore the correlations between impact characteristics (such as impact velocity, impact energy, delamination area etc) and AE signals for CFRP laminates were investigated. And also it were accomplished the evaluation of tensile strength and the investigation on correlation with AE signals for impact damaged specimen of CFRP laminates.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권1호
• /
• pp.62-68
• /
• 1999

The strength data on AlBC3 and HBsC1 which are used for materials of marine propeller blade are insufficient as used of material limited and even rules of KR(Korean Register of Shipping) describe only a point of view that the chemical composition and men values of mechanical proper-ties have to be certain level. In this study distribution characteristics as well as mean values of mechanical properties are investigated through the tensile test and the characteristics of fatigue strength are investigated through the fatigue test.