• 방송공학회논문지
• /
• 제19권6호
• /
• pp.789-797
• /
• 2014

일반적으로 격행주사(interlace) 된 Side-by-Side (SbS) 영상의 경우 화면 재생 시, 전송받은 영상을 먼저 디인터레이싱(de-interlacing)한 후에 좌우 영상을 분리하여 수평 해상도를 보간하는데, 이때 한번 가공된 디인터레이싱 값을 참조하여 보간 값을 결정하게 되는 관계로 수평 해상도의 정확성이 크게 떨어지게 된다. 이러한 문제점을 해결하기 위해 격행주사 방식의 SbS 3D 영상의 수평 해상도 보간 방법을 제안한다. 수평 해상도 보간 시에 격행주사 방식으로 전송받은 라인과 디인터레이싱 기법을 이용해 보간한 라인의 특성에 따라 각 라인에서 활용할 수 있는 전송받은 값을 가지고 각각 다른 보간 방법을 적용함으로써 정확도를 향상하는 방법을 제안한다. 제안된 방법의 실험 결과는 기존의 보간 기법들보다 주관적, 객관적 화질에서 더욱 우수한 성능을 보여준다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2019년도 학술발표회
• /
• pp.152-152
• /
• 2019

This study demonstrates a novel approach of remotely sensed estimates of stream flow at fifteen hydrological station in the Han River Basin, Korea. Multi-temporal data of the European Space Agency's Sentinel-1 SAR satellite from 19 January, 2015 to 25 August, 2018 is used to develop and validate the flow estimation model for each station. The flow estimation model is based on a power law relationship established between the remotely sensed surface area of water at a selected reach of the stream and the observed discharge. The satellite images were pre-processed for thermal noise, radiometric, speckle and terrain correction. The difference in SAR image brightness caused by the differences in SAR satellite look angle and atmospheric condition are corrected using the histogram matching technique. Selective area filtering is applied to identify the extent of the selected stream reach where the change in water surface area is highly sensitive to the change in stream discharge. Following this, an iterative procedure called the Optimum Threshold Classification Algorithm (OTC) is applied to the multi-temporal selective areas to extract a series of water surface areas. It is observed that the extracted water surface area and the stream discharge are related by the power law equation. A strong correlation coefficient ranging from 0.68 to 0.98 (mean=0.89) was observed for thirteen hydrological stations, while at two stations the relationship was highly affected by the hydraulic structures such as dam. It is further identified that the availability of remotely sensed data for a range of discharge conditions and the geometric properties of the selected stream reach such as the stream width and side slope influence the accuracy of the flow estimation model.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.181-184
• /
• 2000

In this paper, we described a design of the input buffer system for efficiently dealing with MPEG audio bitstream to demux header and side information, audio data. In order to overcome the limitations of fixed-word manipulation in bitstream demuxing, we proposed a new variable length bit retrieval system with FSM sequencer supporting MPEG audio frame format, and serial buffer demuxing audio stream, FIFO circular buffer including header and side information.

• 한국정보처리학회논문지
• /
• 제7권6호
• /
• pp.1766-1777
• /
• 2000

In multimedia new service on the internet, there are problems such as server overload, network congestion and initial latency. To overcome these problems, we propose a proxy push-caching scheme that stores a portion of continuous media stream or entire stream, and a transmission scheme of NOD continuous media, RTP-RR and RTP-nR to exploit push-caching scheme. With the proposed push-caching scheme, NOD server pushes fixed portion of stream to a proxy when new data is generated, and the cached size of each stream changes dynamically according to the caching utility value of each stream. As a result, the initial latency of client side could be reduced and the amount of data transmitted fro ma proxy server to client could be increased. Moreover, we estimate a caching utility value of each stream using correlation between disk space occupied by the stream and the amount of data stream requested by client. And we applied the caching utility value ot replacement policies. The performance of the proxy push-caching and continuous media transmission schemes proposed were compared with other schemes using simulations. In the simulation, these schemes show better results than other schemes in terms of BHR (Byte Hit Rate), initial latency, the number of replacement and packet loss rate.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권2호
• /
• pp.148-156
• /
• 2015

A continuous type side jet controller which has four nozzles with thrust control devices was considered. It is deployed to a missile for high maneuverability and fast controllability in the terminal guidance phase. However, it causes more complex aerodynamic jet interactions between the side jet and the supersonic free stream than does the conventional impulse type side jet with a small single thruster. In this paper, a numerical investigation of the jet interference effects for the missile equipped with a continuous type side jet thruster is presented. A three-dimensional flow field was simulated by using a commercial unstructured-based CFD solver. The numerical simulation method was validated through comparison with wind tunnel test results for the single jet. The method of defining jet direction for this type of side jet control to minimize simulation cases was also introduced. Flow fields investigation and jet interaction effects for various flow conditions, jet pressure ratios and defined jet direction conditions were performed. From the numerical simulation for the continuous type side jet, extensive aerodynamic interference data were obtained to construct an aerodynamic coefficients database for precise missile control.

• Wind and Structures
• /
• 제29권1호
• /
• pp.1-13
• /
• 2019

A numerical investigation on forces and flow around three square cylinders in side-by-side arrangement is conducted at a Reynolds number Re = 150 with the cylinder center-to-center spacing ratio L/W = 1.1 ~ 9.0, where W is the cylinder side width. The flowat this Re is assumed to be two-dimensional, incompressible, and Newtonian. The flow simulation is conducted by using ANSYS-Fluent. The flow around the three side-by-side cylinders entails some novel flow physics, involving the interaction between the gap and free-stream side flows as well as that between the two gap flows. An increase in L/W from 1.1 to 9.0 leads to five distinct flow regimes, viz., base-bleed flow (L/W < 1.4), flip-flopping flow (1.4 < L/W < 2.1), symmetrically biased beat flow (2.1 < L/W < 2.6), non-biased beat flow (2.6 < L/W < 7.25) and weak interaction flow (7.25 < L/W < 9.0). The gap flow behaviors, time-averaged and fluctuating fluid forces, time-averaged pressure, recirculation bubble, formation length, and wake width in each flow regime are discussed in detail.

• 대한기계학회논문집B
• /
• 제21권5호
• /
• pp.628-636
• /
• 1997

Flow visualization technique incorporating photochromic dye is used to study the flow characteristics of the gravity driven laminar wavy film. The film thickness and wave speed are successfully measured by flow visualization. As the inclination angle increases, the waves have higher peaks and lower substrate thickness. The measured cross stream velocity at the free surface is up to 10% of stream wise velocity, which shows enhanced mixing in the lump of the film. The measured stream wise velocity profiles are close to parabolic profile near the substrate and the peak but show significant velocity defect near the rear side of the wave. The measured wall shear rate distributions show good agreement with the previous workers' numerical results.

• Wind and Structures
• /
• 제17권5호
• /
• pp.537-552
• /
• 2013

Wind tunnel experiments were performed to study the wind loads on an inclined flat plate with and without a guide plate. Highly turbulent flow, which corresponded to free-stream turbulence intensity on the flat roof of low-rise buildings, was produced by a turbulence generation grid at the inlet of the test section. The test model could represent a typical solar collector panel of a solar water heater. There are up-stream movements of the separation bubble and side-edge vortices, more intense fluctuating pressure and a higher bending moment in the turbulent flow. A guide plate would result in higher lift coefficient, particularly with an increased projected area ratio of a guide plate to an inclined flat plate. The value of lift coefficient is considerably lower with increased free-stream turbulent intensity.

• 오토저널
• /
• 제10권3호
• /
• pp.51-59
• /
• 1988

The wake structure behind a van type vehicle was studied experimentally with a 5-hole yawhead probe. Through an effective calibration method of the 5-hole yawhead probe, the flow properties such as velocity vector, total pressure and static pressure were obtained on two cross sections within the wake. These results combined with the surface flow visualization performed in the previous study, yielded some information about the wake structure. When the model was placed in a stream with zero yaw angle, two counter rotating vortices were observed behind the model which pull down the surface flow on each side of the model. With increasing the yaw angle, the surface flow on the windward side changed to divide the flow in two directions, one flows upward on the upper part and the other flows downward on the lower part of the windward side. Hence a new weak vortex was created on the upper windward side, which resulted 3 vortices within the wake. The size and the strength of the vortices increased with yaw angle.

• 대한전자공학회논문지SP
• /
• 제48권2호
• /
• pp.116-124
• /
• 2011

본 논문에서는 해양 환경의 특성을 고려하여 선박 환경에 적합한 방식으로 Server-side 방식에 따른 선박 USN 미들웨어를 구현하였다. 다중 질의 처리 모듈에서는 선박USN에 구성된 다차원 센서 스트림 데이터를 효율적으로 처리하기 위해서 최적화된 질의 계획으로 Mjoin 질의와 해쉬 테이블을 이용한 최적화 방법을 제시하고 모듈을 구성하였다. 상황 인식 관리 모듈에서는 해양의 특성을 고려하여 선박의 상황을 인식하고 관리하는 방법을 제시하였고 SVM 알고리즘을 이용하여 위험 상황을 판단하였다. 제안한 SVM 알고리즘을 이용하여 각 상황별로 5,000 건의 데이터를 입력 받아 실험한 결과 화재 상황과 선체 위험 상황에 대한 평균 정확도는 87.5%, 85.1%를 보였고, 측정 결과를 전송하여 선박 USN 모니터링 시스템을 구현하였다.