• Korean Management Science Review
• /
• v.17 no.1
• /
• pp.117-134
• /
• 2000

Pubilc utility industries including the electric utility industry are facing a new stream of privatization com-petition with the private sector and deregulation. The necewssity to solve now and in the future power supply and demand problems has been increasing through the sophisticated generation expansion plan(GEP) approach con-sidering not only KEPCo's supply-side resources but also outside resources such as non-utility generation(NUG) demand-side management (DSM). Under the environmental situation in the current electric utility industry a new approach is needed to acquire multiple resources competitively. This study presents the development of a modified electric generation expansion analysis system(EGEAS) model with avoided cost based on the existing EGEAS model which is a dynamic program to develope an optimal generation expansion plan for the electric utility. We are trying to find optimal GEP in Korea's case using our modified model and observe the difference for the level of reliabilities such as the reserve margin(RM) loss of load probability(LOLP) and expected unserved energy percent(EUEP) between the existing EGEAS model and our model. In addition we are trying to calculate avoided cost for NUG resources which is a criterion to evaluate herem and test possibility of connection calculation of avoided cost with GEP implementation using our modified model. The results of our case study are as follows. First we were able to find that the generation expansion plan and reliability measures were largely influenced by capacity size and loading status of NUG resources, Second we were able to find that avoided cost which are criteria to evaluate NUG resources could be calculated by using our modified EGEAS model with avoided cost. We also note that avoided costs were calculated by our model in connection with generation expansion plans.

• Korean Institute of Interior Design Journal
• /
• v.22 no.2
• /
• pp.112-119
• /
• 2013

This study focuses on an innate 'spiritual' quality of arts including building art, or a meaning of the religious philosophy of 'creativity-art'. In particular, this focuses, among two aspects in roots of modernism, especially on the irrational facet veiled by the name of 'a new' religious faith, rather than the rational such as the function. In fact, although modern Avant-gardes' religious philosophical faiths called by different names respectively have generally considered as one of the sources for their designs, nevertheless it had veiled because of the religious 'orthodoxy power' at that time. Arguably, as known well, the creativity of art is intimate relation with a religious ideas. Thus, for this purpose, this study treats this theme in central these three issues; Orientalism, Universalism, and Froebelianism which are intimate in the realm of religious philosophy. Ultimately, through a research on the universal religious philosophy in all three objects as keeping a quality not of pantheism but of 'Panentheism' emphasizing the individual's 'divine' artistic volition, this study deepens the understanding on the Creativity-art as the main characteristic of modernity. Namely, it is very important to draw a distinction between pantheism and Panentheism; because, through the pantheism, it is difficult to comprehend a stream and a characteristic of the twentieth new religious thoughts including those of modern avant-garde artists, as well as their existential free-will as a whole.

• Journal of the Korean Society of Industry Convergence
• /
• v.20 no.1
• /
• pp.8-18
• /
• 2017

This research analyzed the ventilation effect of the multi-span greenhouse based on the types of greenhouse structure, weather conditions, and locations inside the greenhouse. To compare and analyze the ventilation effects with different types of greenhouse, the uniform environmental conditions should be selected in advance. But these factors are not controlled and require tense many precision facilities and labor forces. Thus, the CFD simulation was used for the air stream to be analyzed qualitatively and quantitatively. In addition, for the ventilation effect analysis, the TGD (Tracer Gas Decay) was used to overcome the shortcomings of the current ventilation measurement method. The calculation error of ventilation rate using TGD was low (10.5%). Thus, the TGD is very effective in calculating the ventilation efficiency. The wind direction of 90 degrees showed the best ventilation effect. The ventilation rate also decreased along the air circulation path, and the rate was the lowest around the outlet. The computed fluid method (CFD) turned out to be a power tool for simulating flow behavior in greenhouse.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.4 no.2
• /
• pp.29-36
• /
• 2005

All-optical fiber-type $2{\times}32$ splitters for an Ethernet PON (passive optical network) were fabricated by using a FBT (fiber biconical tapered) process and the performance of the splitters was tested in upstream transmission of the EPON system. The $2{\times}32$ splitters was obtained by cascading $1{\times}4$ splitters fabricated by a conventional FBT process and showed -18 dB of insertion loss with 1.5 dB uniformity of output power at each channel and -0.1 dB of polarization dependent loss. The insertion loss variation was below 0.1 dB at the temperature range of $-40^{\circ}C\;to\;80^{\circ}C$. For upstream channel transmission test in the EPON system were a Zig board and a burst mode receiver. Zenko-made optical module was used for the burst mode receiver by adding functions of serializer/deserializer and clock data recovery, a Virtex II pro20 chipset and Vitesse VSC7123 were used in the Zig board for characterizing the burst mode and in the clock data recovery chipset, respectively. Startup acquisition lock time and data acquisition lock time were measured to be 670ns and 400ns, respectively, in the upstream channel transmission of the EPON system adapting the $2{\times}32$ splitter fabricated in this work.

• Journal of Korea Water Resources Association
• /
• v.48 no.8
• /
• pp.685-693
• /
• 2015

We propose a method for deriving the relationship between channel width and discharge from remote sensing products. Stream widths at points distributed along a river network can be measured from high-resolution remote imagery. Further, corresponding drainage area for these points can be calculated using digital elevation models, making it possible to construct width-drainage area relation. On the other hand, the relationship between the flow discharge and the drainage area is obtained from historical data measured at ground stations. By coupling these two relationships, we can finally derive the width-discharge relationship which comprises an important component of downstream hydraulic geometry. The proposed method was tested for the Nakdong River and the Seomjin River, successfully capturing power-law exponents in the width-discharge relationships reported in earlier studies. The proposed approach can serve as an alternative for obtaining the hydraulic geometry relationship under the limits of ground data.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1599-1603
• /
• 2008

발전소 냉각수 배수로에는 유속 2 m/s 이상의 빠른 흐름의 수로가 존재하여 수력발전을 꾀할 수 있어, 하동화력의 경우 조류발전 수차인 헬리컬 수차를 이용한 수력 개발이 진행 중이다. 하동화력 배수로는 약 630 m의 암거와 약 250 m의 개수로로 이루어져 있는데, 현재 상업용 발전설비 개발을 위해 시험용 수차발전 설비를 개수로로 이어지는 암거 출구부에 설치하여 성능 시험을 추진하고 있다. 이에 본 연구에서는 발전 설비의 설치로 인한 수위 증가가 냉각수 순환 계통에 미치는 영향을 파악하기 위하여 배수로 구간의 수위변화 또는 압력변화를 수치해석을 통해 분석하였다. 배수로 암거 출구부에 가로 3.6 m ${\times}$ 세로 1.5 m 헬리컬 수차 1 set를 설치하는 경우 저조시에는 seal well 후단(하류측)의 수위가 seal well의 위어 정부표고를 넘지 않아 수차구조물에 의한 압력변화가 상류로 미치는 영향이 없었다. 그러나 고조시에는 seal well 전 후단이 만관 관수로 흐름이 되어 하류의 압력변화가 상류로 전파되었다. 단, 수차구조물을 설치한 경우 순환수 펌프를 처음 기동할 때 압력파의 전파로 인해 초기 약 10 분간 불안정한 압력변화가 발생하나 수차구조물 설치 전인 현상태에서 발생하는 압력변화 범위를 벗어나지는 않고 이내 안정되며, 수차구조물 설치로 인한 수위 증가분만큼의 펌프 양정고 증가로 소요 동력이 증가할 수 있으나 0.2 m 내외의 미약한 증가이므로 정상 운전에는 문제가 없을 것으로 판단되었다. 따라서 수차구조물 설치 시, 저조시에는 순환수계통에 영향을 주지 않으며, 고조시에도 일부 시간 동안 미약한 수두변화만 있을 뿐 순환수 계통의 안전에는 지장을 주지 않을 것으로 확인되었다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.1
• /
• pp.29-34
• /
• 2017

This paper considers hybrid beamforming for millimeter wave system in uplink transmission where multiple users send their data streams simultaneously. Hybrid beamforming has low-cost and low power consumption features compared to conventional digital beamforming schemes. We assume that each user uses one transmit antenna and sends one data stream, while the base station has multiple receive antennas and multiple radio frequency chains. Therefore, hybrid beamforming is performed only at the base station. We also assume that each user does not know instantaneous channel side information (CSI), while the base station is able to estimate the CSI from all users accurately. Under this channel assumption, the outage probability is not zero. We evaluate the outage probability of the considered hybrid beamforming as a performance metric through computer simulations. We show that the outage probability of hybrid beamforming approaches that of digital beamforming in some cases.

• Journal of Hydrogen and New Energy
• /
• v.14 no.1
• /
• pp.24-34
• /
• 2003

For gaseous fuel combustion with inherent $CO_2$ capture and low NOx emission, chemical-looping combustion may yield great advantages for the savings of energy to $CO_2$ separation and suppressing the effect on environment, In chemical-looping combustor, fuel is oxidized by metal oxide medium in a reduction reactor. Reduced particles are transported to oxidation reactor and oxidized by air and recycled to reduction reactor. The fuel and the air are never mixed, and the gases from reduction reactor, $CO_2$ and $H_2O$, leave the system as separate stream. The $H_2O$ can be easily separated by condensation and pure $CO_2$ is obtained without any loss of energy for separation. In this study, five oxygen carrier particles such as NiO/bentonite, NiO/YSZ, $(NiO+Fe_2O_3)VYSZ$, $NiO/NiAl_2O_4$, and $Co_{\chi}O_y/CoAl_2O_4$ were examined &om the viewpoints of reaction kinetics, oxygen transfer capacity, and carbon deposition characteristics. Among five oxygen particles, NiO/YSZ particle is superior in reaction rate, oxygen carrier capacity, and carbon deposition to other particles. However, at high temperature ($>900^{\circ}C$), NiO/bentonite particle also shows enough reactivity and oxygen carrier capacity to be applied in a practical system.

• Journal of Broadcast Engineering
• /
• v.21 no.4
• /
• pp.506-514
• /
• 2016

In this study, HEVC over DVB-T2 systems with a bandwidth of 6 MHz is considered, particularly for the terrestrial 4K-UHDTV broadcasting service in the Republic of Korea. The threshold of visibility carrier-to-noise power ratio (ToV C/N) and the receiver minimum required input level (sensitivity) for satisfying the subjective picture failure (SPF) condition are measured in the laboratory. It is observed, for transmitting 26.37 Mbps data stream correctly, that ToV C/N is 18.8 dB on average, and the receiver sensitivity is varied from minimum -84.2 dBm to maximum -80.0 dBm. Based on the results, the receiver noise floor is calculated by -100 dBm on average.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.6
• /
• pp.815-824
• /
• 2011

In this study, a non-thermal plasma system was employed to simultaneously remove odorous compounds and organic sludge. The system consisted of two reactors; the first one was the non-thermal plasma reactor where ozone was produced by the plasma reaction and the ozone oxidized hydrogen sulfide, the model odorous compound, and then the ozone-laden gas stream was introduced to the second reactor where wasted sludge was disintegrated and solubilized by ozone oxidation. In this study, the gas retention time (GRT) and the hydraulic retention time (HRT) were changed in the two-reactor system, and the effects of GRT and HRT on reduction efficiencies of odor and sludge were determined. As the GRT increased, the ozone concentration increased resulting in an increasing efficiency of hydrogen sulfide removal. However, the overall ozone loading rate to the second sludge reactor was the same at any GRT, which resulted in an insignificant change in sludge reduction rate. When HRTs in the sludge reactor were 1, 2, 4 hours, the sludge reduction rates were approximately 30% during the four-hour operation, while the rate increased to 70% at the HRT of 6 hours. Nevertheless, at HRTs greater than 4 hours, the solubilization efficiency was not proportionally increased with increasing specific input energy, indicating that an appropriate sludge retention time needs to be applied to achieve effective solubilization efficiencies at a minimal power consumption for the non-thermal plasma reaction.