• Steel and Composite Structures
• /
• 제42권5호
• /
• pp.599-615
• /
• 2022

In the present paper, the numerical dynamic analysis of a functionally graded nano-scale nonuniform tube was investigated according to the high-order beam theory coupled with the nonlocal gradient strain theory. The supposed cross-section is changed along the pipe length, and the material distribution, which combines both metal and ceramics, is smoothly changed in the pipe length direction, which is called axially functionally graded (AFG) pipe. Moreover, the porosity voids are dispersed in the cross-section and the radial pattern that the existence of both material distribution along the tube length and porosity voids make a two-dimensional functionally graded (2D-FG) truncated conical pipe. On the basis of the Hamilton principle, the governing equations and the associated boundary conditions equations are derived, and then a numerical approach is applied to solve the obtained equations.

• 전기전자학회논문지
• /
• 제8권1호
• /
• pp.117-120
• /
• 2004

단일 광섬유 격자와 Yb와 Er이 첨가된 광섬유를 이용한 스트레인 및 온도의 동시 측정을 시행하였다. 스트레인과 온도에 대해서 $1100\;{\mu}{\varepsilon}$ and $50-180\;^{\circ}C$ 범위에서 $55.8\;{\mu}{\varepsilon}$ 와 $3\;^{\circ}C$의 오차를 가지고 측정하였다. 본 센서의 소형 및 저가의 특성으로 미루어 볼 때 넓은 범위의 스트레인 센서로 활용가치가 높다고 사료된다.

• 한국지반공학회논문집
• /
• 제16권1호
• /
• pp.65-73
• /
• 2000

본 연구에서는 미소변형률에서 대변형률까지의 거동을 모델할 수 있는 탄소성 구성모델을 개발하였다. 제안된 구성모델은 일반 등방경화규칙에 근거한 비등방 경화규칙과 전응력 개념을 토대로 개발하였다. 그리고 제안된 구성관계가 기존의 대표적 구성모델을 포함하고 있음을 수학적으로 입증하였다. 국내 화강풍화토에 대한 공진주시험, 비틂전단시험, 삼축시험 등 일련의 실내시험 결과를 이용하여 검증한 결과, 쌍곡선 모델 및 Ramberg-Osgood모델과 비교하여 제안된 모델은 미소변형률에서 대변형률까지의 거동을 더욱 일관되고 정확하게 모델할 수 있다. 또한 비틂전단시험 결과와의 비교에서는, 미소변형률 조건에서 나타나는 비선형성을 적합하게 예측할 수 있었다.

• International Journal of Concrete Structures and Materials
• /
• 제10권4호
• /
• pp.513-525
• /
• 2016

The resistance-demand approach has emerged as an effective approach for determining the shear capacity of reinforced concrete beams. This approach is based on the fact that both the shear resistance and shear demand are correlated with flexural tensile strain from compatibility and equilibrium requirements. The basic shear strength, under a given loading is determined from the intersection of the demand and resistance curves. This paper verifies the applicability of resistance-demand procedure for predicting the shear capacity of high strength concrete beams without web reinforcement. A total of 18 beams were constructed and tested in four-point bending up to failure. The test variables included the longitudinal reinforcement ratio, the shear span to depth ratio, and the beam depth. The shear capacity of the beams was predicted using the proposed procedure and compared with the experimental values. The results of the comparison showed good prediction capability and can be useful to design practice.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.265-270
• /
• 1995

In orthogonal cutting a new approach for modeling of burr formation process when tool exits workpiece is proposed. The approach is based on the rigid-plastic FEM combined with the ductile fracture criterion and the element kill method. The approach is applied to simulate a plane strain cutting process. The results of the FEM are compared with those of the experiment. It is shown that the fracture location and fracture angle as well as cutting force can be predicted using the proposed approach with a good correlation to experimental results.

• 대한기계학회논문집A
• /
• 제21권2호
• /
• pp.217-222
• /
• 1997

A simple finite element approach to predicting deformed shape and load-deflection curve of elastomers is presented in this paper. The method is based on several simplifications in deformation pattern and material behavior. The conventional updated Lagrangian approach is employed together with material data obtained by a simple tension test. The presented approach is verified through comparison of predicted results with experimental ones and applied successfully to shape design of various elastomers for shock, vibration and noise control. The advantage of the presented approach lies in easiness, simplicity and accuracy enough for engineering application.

• Smart Structures and Systems
• /
• 제15권2호
• /
• pp.489-503
• /
• 2015

Response estimation at unmeasured locations using the limited number of measurements is an attractive topic in the field of structural health monitoring (SHM). Because of increasing complexity and size of civil engineering structures, measuring all structural responses from the entire body is intractable for the SHM purpose; the response estimation can be an effective and practical alternative. This paper investigates a response estimation technique based on the Kalman state estimator to combine multi-sensor data under non-zero mean input excitations. The Kalman state estimator, constructed based on the finite element (FE) model of a structure, can efficiently fuse different types of data of acceleration, strain, and tilt responses, minimizing the intrinsic measurement noise. This study focuses on the effects of (a) FE model error and (b) combinations of multi-sensor data on the estimation accuracy in the case of non-zero mean input excitations. The FE model error is purposefully introduced for more realistic performance evaluation of the response estimation using the Kalman state estimator. In addition, four types of measurement combinations are explored in the response estimation: strain only, acceleration only, acceleration and strain, and acceleration and tilt. The performance of the response estimation approach is verified by numerical and experimental tests on a simply-supported beam, showing that it can successfully estimate strain responses at unmeasured locations with the highest performance in the combination of acceleration and tilt.

• 대한의용생체공학회:의공학회지
• /
• 제21권4호
• /
• pp.373-384
• /
• 2000

본 연구의 목적은 체적 변형률 (volumetric strain)에 의한 스폰지 뼈의 밀도를 예측하는 것이다. 스폰지 뼈의 내부에서 유체의 흐름을 고려하기 위하여 각각의 normal strain의 합을 체적 변형률로 정의하였다. 체적 변형률의 경계조건에 대한 민감한 반응은 스폰지 뼈의 밀도를 예측하도록 하였다. 이러한 이론적 배경을 유한요소법 (finite element method)에 적용시켜 대퇴골 (femur)과 척구 (spine)의 스폰지 뼈에서의 밀도를 예측하였다. 예측된 뼈의 밀도는 실험적 데이터와 매우 유사하였다. (Wolff 1892, Keller et al. 1989, Codyet al. 1992). 뼈의 밀도의 함수인 뼈의 탄성계수와 강도 또한 실험적 결과와 매우 유사하였다. (Keller et al. 1989, Carter and Hayes 1977). 본 연구에서 정립된 알고리즘은 스폰지 뼈의 밀도를 예측하는데 있어서 수렴성과 민감성이 우수하였다. 따라서 본 연구의 컴퓨터 알고리즘은 스폰지 뼈의 밀도예측에 있어서 매우 유용한 방법이 될 것이다.

• Structural Engineering and Mechanics
• /
• 제57권6호
• /
• pp.1107-1124
• /
• 2016

Consistent finite strain Plate constitutive relations are derived based on a hyperelastic formulation for an isotropic material. Plate equilibrium equations under finite strain are derived following a static kinematic approach. Three Euler angles and four shear angles, based on Timoshenko beam theory, represent the kinematics of the deformations in the plate cross section. The Green deformation tensor has been expressed in term of a deformation tensor associated with the deformation and stretches of an embedded plate element. Buckling formulation includes the in-plane axial deformation prior to buckling and transverse as well as in-plane shear deformations. Numerical results for a simply supported thick plate under uni-axial compression force are presented.

• 가정과삶의질연구
• /
• 제10권2호
• /
• pp.99-112
• /
• 1992

This research was designed to illuminate that work domains and family domains are not separated but interacting spheres and to suggest efficient coping strategies than alleviate work/family role conflicts. The subjects of this study were 395 employed professional wives living in Seoul. Korea. Survey methods were questionnaires. Data analysis strategies were percentile, frequency, one-way-anova and multiple classification analysis. The results were as follows; 1)Employed wives experienced time-based conflicts and strain-based role conflicts. This finding supports the scarcity approach that multiple roles inevitably create strain. 2) Individual, family and work-related variables were predictors of work/family role conflicts. This findings indicate that work domains and family domains cannot be regraded as separated spheres. 3) Employed wives tried to meet all the given roles demands not by reducing role responsibilities, but by increasing the efficiency of role performance. This finding reflects the characteristics of employed wives who try to perform successfully all the responsibilities. 4)The negative correlation of coping strategies and work/family role conflicts suggests that strategies can function effectively in alleviating the work/family role conflicts.