• Journal of the Korea Concrete Institute
• /
• v.15 no.2
• /
• pp.280-287
• /
• 2003

To evaluate the practical application of oyster shells(OS) as construction materials, an experimental study was performed. More specifically, the long-term mechanical properties and durability of concrete blended with oyster shells were investigated. Test results indicate that long-term strength of concrete blended with 10% oyster shells is almost identical to that of normal concrete. However, the long-term strength of concrete blended with 20% oyster shells is appreciably lower than that of normal concrete. Thereby, concrete with higher oyster shell blend has the possibility of negatively influencing the concrete long-term strength. Elastic modulus of concrete blended with crushed oyster shells decreases as the blending mixture rate increases. Namely, the modulus is reduced to approximately 10∼15% when oyster shells are blended up to 20% as the fine aggregate. The drying shrinkage strain increases with an increasing crushed oyster shells substitution rate. In addition, the existing model code of drying shrinkage and creep do not coincide with the test results of this study. An adequate prediction equation needs to be developed. The utilization of oyster shells as the fine aggregate in concrete has an insignificant effect on fleering and thawing resistance, carbonation and chemical attack of concrete. However, water permeability is considerably improved.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.3
• /
• pp.432-438
• /
• 2017

Objective: The objective of this study was to evaluate the effect of combinations of $NaNO_2$ and NaCl concentrations on Listeria monocytogenes (L. monocytogenes) growth in emulsion-type sausage. Methods: Emulsion-type sausages formulated with different combinations of $NaNO_2$ (0 and 10 ppm) and NaCl (1.00%, 1.25%, and 1.50%) were inoculated with a five-strain L. monocytogenes mixture, and stored at $4^{\circ}C$, $10^{\circ}C$, and $15^{\circ}C$, under aerobic or vacuum conditions. L. monocytogenes cell counts were measured at appropriate intervals, and kinetic parameters such as growth rate and lag phase duration (LPD) were calculated using the modified Gompertz model. Results: Growth rates increased (0.004 to 0.079 Log colony-forming unit [CFU]/g/h) as storage temperature increased, but LPD decreased (445.11 to 8.35 h) as storage temperature and NaCl concentration increased. The effect of combinations of NaCl and low-$NaNO_2$ on L. monocytogenes growth was not observed at $4^{\circ}C$ and $10^{\circ}C$, but it was observed at $15^{\circ}C$, regardless of atmospheric conditions. Conclusion: These results indicate that low concentrations of $NaNO_2$ and NaCl in emulsion-type sausage may not be sufficient to prevent L. monocytogenes growth, regardless of whether they are vacuum-packaged and stored at low temperatures. Therefore, additional techniques are necessary for L. monocytogenes control in the product.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.23 no.1
• /
• pp.27-44
• /
• 1993

This study was performed to investigate the changes of mandibular condyle by low calcium diet and the effects of irradiation on the bone in osteoporotic state. In order to carry out this experiment, 80 seven-week old Sprague-Dawley strain rats weighing about 150 gm were selected and equally divided into one experimental group of 40 rats and one control group with the remainder. The experimental group and the control group were then subdivided into two group and exposed to irradiation. The two irradiation groups received a single dose of 20 Gy on the jaw area only and irradiated with a cobalt-60 teletherapy unit. The rats in the control and experimental groups were serially terminated by fours on the 3rd, the 7th, the 14th, and the 21st day after irradiation. After termination, both sides of the dead rats mandibular condyle were removed and fixed with 10% neutral formalin. The bone mineral density of mandibular condyle was measured by use of dual energy X-ray bone densitometer(model DDX-alpha, Lunn Corp., U. S. A.). The mandibular condyle was radiographed with Hitex HA-80(Hitex Co., Japan). Thereafter, the obtained radiographs were observed, and the mandibular condyle was further decalcified and embedded in paraffin as the general method. The specimen sectioned and stained with hematoxylin-eosin, PAS and Rabbit Anti-Human Tumor Necrosis Factor-a observed by a light microscope. The obtained results were as follows: 1. In the non-irradiated group with the low calcium diet, the bone mineral density of the condyle was markedly decreased after 14 days, and decrease the number of trabeculae of the condyle and resorption of the calcified cartilaginous zone were observed after 3 days. On microscopic observations, the number nd size of trabeculae were decreased after 7 days of experiment. 2. In the irradiated group with the low calcium diet, the bone mineral density of the condyle was markedly decreased after 14 days and resorption of the calcified cartilaginous zone and decrease the number and coarse of the trabeculae of the condyle were observed. These findings were extended rather than in non-irradiated group with low calcium diet. On microscopic observations, many osteoclasts were detected and the number and size of trabeculae were somewhat decreased after 7 days. Also there was degenerative changes of tissues of bone marrow on the 14th day but that condition was restored on the 21st day of experiment. 3. In the irradiated group with normal diet, the bone mineral density of the condyle was somewhat decreased with times and degree of decrease of the number of trabeculae was somewhat larger than in the non-irradiated group with normal diet. On microscopic observations, the tissues of bone marrow were atrophic and degenerative changes but that condition was restored on the 21st day of experiment. 4. In immunocytochemical findings, in the irradiated and non-irradiated groups with low calcium diet, negative or partial positive response to TNF was observed, but positive response in the normal diet groups.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.62-68
• /
• 2016

The feeder cable assembly is an automotive part used for telecommunication. If it malfunctions, the control and safety of the automobile can be put at risk. ALT (Accelerated Life Testing) is a testing process for products in which they are subjected to conditions (stress, strain, temperatures, etc.) in excess of their normal service parameters in an attempt to uncover faults and potential modes of failure in a short amount of time. Failure is caused by defects in the design, process, quality, or application of the part, and these defects are the underlying causes of failure or which initiate a process leading to failure. Thermal shock occurs when a thermal gradient causes different parts of an object to expand by different amounts. Thermal shock testing is performed to determine the ability of parts and components to withstand sudden changes in temperature. In this research, the main causes of failure of the feeder cable assembly were snapping, shorting and electro-pressure resistance failure. Using the Coffin-Manson model for ALT, the normal conditions were from Tmax = $80^{\circ}C$ to Tmin = $-40^{\circ}C$, the accelerated testing conditions were from Tmax = $120^{\circ}C$ to Tmin = $-60^{\circ}C$, the AF (Acceleration Factor) was 2.25 and the testing time was reduced from 1,000 cycles to 444 cycles. Using the Bxlife test, the number of samples was 5, the required life was B0.04%.10years, in the acceleration condition, 747 cycles were obtained. After the thermal shock test under different conditions, the feeder cable assembly was examined by a network analyzer and compared with the Weibull distribution modulus parameter. The results obtained showed good results in acceleration life test mode. For the same reliability rate, the testing time was decreased by a quarter using ALT.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.614-621
• /
• 2019

A generalized laminated composite beam element is presented for the flexural and buckling analysis of laminated composite beams with double and single symmetric cross-sections. Based on shear-deformable beam theory, the present beam model accounts for transverse shear and warping deformations, as well as all coupling terms caused by material anisotropy. The plane stress and plane strain assumptions were used along with the cross-sectional stiffness coefficients obtained from the analytical technique for different cross-sections. Two types of one-dimensional beam elements with seven degrees-of-freedom per node, including warping deformation, i.e., three-node and four-node elements, are proposed to predict the flexural behavior of symmetric or anti-symmetric laminated beams. To alleviate the shear-locking problem, a reduced integration scheme was employed in this study. The buckling load of laminated composite beams under axial compression was then calculated using the derived geometric block stiffness. To demonstrate the accuracy and efficiency of the proposed beam elements, the results based on three-node beam element were compared with those of other researchers and ABAQUS finite elements. The effects of coupling and shear deformation, support conditions, load forms, span-to-height ratio, lamination architecture on the flexural response, and buckling load of composite beams were investigated. The convergence of two different beam elements was also performed.

• Magazine of the Korea Concrete Institute
• /
• v.11 no.1
• /
• pp.279-288
• /
• 1999

The creep of concrete structures caused by variable stresses is generally calculated by step-by-step method based on the superposition of creep function. Although most practical application is carried out by this linear assumption. significant deviations between predictions and experiments have been observed when unloading takes place, that is. stress is reduced. This shows that the superposition of creep function does not describe accurately the effect of sustained compressive preload. The main purpose of this study is to propose a creep analysis model which is expressed with both creep function and creep recovery function where increase or decrease of stress is repeated. In these two function method, the creep behavior is modelled by using linear creep law for loading and creep recovery law for unloading. To apply two function method to time analysis of concrete structures, the calculation method of creep strain increment under varying stress is proposed. The calculation results based on the present method correlates very well with test data, but the conventional superposition method exhibits large deviation from test results. This paper provides a more accurate method for the time dependent analysis of concrete structures subjected to varying stress, i.e. increasing or decreasing stress. The present method may be efficiently employed in the revision of future concrete codes.

• Korean Journal of Environmental Agriculture
• /
• v.21 no.3
• /
• pp.216-222
• /
• 2002

In order to evaluate the antifungal activity of bacteria against plant pathogenic fungi, 8 bacteria were isolated from mushroom compost hot spring, seaweed, and forest soil and mutants from them were induced by $LD_{95}$ gamma radiation($^{60}Co$). Bacillus circulans K1, Burkholderia gladioli K4 and Bacillus subtilis YS1 showed wide antifungal spectrum against 12 kinds of plant pathogenic fungi. From the radiation sensitivity test, B. gladioli K4 was very sensitive to gamma radiation and its $D_{10}$ value was 0.11 kGy. Antifungal activities of B. circulans Kl-1004 and B. subtilis YS1-1009, which were induced by the radiation of $^{60}Co$ increased against Botryosphaeria dothidea. The mutant strains, B. subtilis YS1-1006 and B. subtilis YS1-1009 were resistant to tebuconazole and copper hydroxide. SAR535, SAR5108, and SAR5118 mutated from Streptomyces sp. SAR01 were antifungal activity deficient mutants against 5 kinds of plant pathogenic fungi compared to wild strain, so that they could be supposed to be model strains far studying antifungal mechanism. It is suggested that various functional types of mutants could be induced by gamma radiation and applied usefully.

• Korean Journal of Environmental Biology
• /
• v.34 no.1
• /
• pp.56-62
• /
• 2016

Pest population density models are very important to monitor the initial occurrence and to understand the continuous fluctuation pattern of pest in pest management. This is one of the major issues in agriculture because these predictions make pesticides more effective and environmental impact of pesticides less. In this study, we combined and predicted the mortality change of pest caused by pesticides with temperature change and population dynamic model. Sensitive strain of two-spotted spider mite (Tetranychus urticae Koch) with kidney bean leaf as host was exposed to mixed acaricide, Acrinathrin-Spiromesifen and organotin acaricide, Azocyclotin, at 20, 25, 30, and $35^{\circ}C$, respectively. There was significant difference in mortality of T. urticae among pesticides and temperatures. We used DYMEX to simulate population density of T. urticae and predicted that the initial management time and number of chemical control would be changed in the future with climate change. There would be implications for strategies for pest management and selection process of pesticide in the future corresponding climate change.

• The Journal of Korean Society of Virology
• /
• v.29 no.2
• /
• pp.129-136
• /
• 1999

Transient transfection assay has been done to evaluate whether the c-jun activation would be prerequisite to the induction of permissiveness against human cytomegalovirus using in vitro cell model in which U937 has been induced to express CD11b and CD14 to become potential monocyte/macrophage cells by TPA treatment. U937 cells were treated with $10\;{\mu}M$, $50\;{\mu}M$ or $100\;{\mu}M$ of TPA. The cell morphology change was observed and the expression of the CD11b and CD14 was confirmed by FACS. Differentiated cells were transfected with pJLuc reporter vector which contained the wild type murine c-jun promoter spanning the SP1, CTF, ATF/CREB and MEF-2 binding sites upstream of the firefly luciferase gene. After 48 hrs of transfection, the cells were infected with HCMV Towne strain and the luciferase activity was assessed at 1 hand 4 h pi. The transfection assay showed no activation of the c-jun promoter at 1 h pi, instead, it showed 2 times increase of the its activity at 4 h pi. There was no difference of the c-jun promoter activation between TPA treated and untreated U937 cells, implying that c-jun activation might not be prerequisite for allowing cells to be premissive to HCMV, although HCMV infection itself could activate c-jun promoter.

• Journal of Life Science
• /
• v.15 no.2 s.69
• /
• pp.287-292
• /
• 2005

The crude galactomannans (GMs) were obtained from the culture of a newly isolated fungus Trichoderma erinaceum DG-312 and their anti-inflammatory activity was investigated in mice. The maximum concentrations of mycelial biomass and GMs reached 9.44 g/l, 2.72 g/l at day 3 in a 5-l stirred-tank bioreactor, respectively. The results of Sepharose CL-6B gel chromatography and compositional analysis revealed that the crude GMs contain heterogeneous polysaccharides consisting of $74.9\%$ mannose and $24.1\%$ galactose. The GMs was shown to possess a significant anti-inflammatory activity against acetic acid-induced inflammatory mouse model in a dose-dependent manner, when mice were treated with 100 and 200 mg GMs/kg body weight. The inhibition in vascular permeability $(60.6\%)$ and in writhing response $(62.5\%)$ evidenced an anti-inflammatory activity of the GMs. The marked anti-inflammatory and writhing-lowering properties of the GMs suggest its potential therapeutic use.