• The Journal of Korean Physical Therapy
• /
• v.3 no.1
• /
• pp.203-209
• /
• 1991

Cervical traction effects its benefits by immobilizing the neck when it is used in a continuous manner from a reclining position. when used intermittently traction functions by elongating the neck and straightening the cervical Lordosis. This position of slight flexion opens the posterior articulations, widens the intervetebral foramina, disengages the facet surfaces, and elongates the posterior muscular tissues and Ligaments. The duration of traction is arbitary but the amount of traction is that which is tolerated by the patient and benefits the patient's problem. Application of traction in slingh flexion accomplishes the same separation with Less force and thus with Less discomfort experienced by the patient. But the effect of traction on the disks is debated.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.473-476
• /
• 2008

In this paper, we designed the main mechanism of high throughput device for rod-cuts of spent fuel. For this, we analyzed the mechanical methods(slitting, ball mill, roller straightening) and chemical methods(muffle furnace, rotary kiln). As the results, methods of ball drop and rotary drum for concepts design were selected in the analysis step. For enhancement of oxidation rate, we devised the blades on the reactor with mesh type. Also, for enhancement of decladding rate, we designed ball size and rotation reactor with mesh type and devised the vacuum system for fission products. Mechanisms of oxidation and recovery can simultaneously handle the rod-cuts of spent fuel and independently recover. The results of mechanism design can be used for scale-up of high throughput device.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.7
• /
• pp.380-385
• /
• 2009

This study is to investigate the pressure wave characteristics and the maximum pressure rise generated by instantaneous valve closure at the end of the straightening polybutylene double piping system with header. Experiments were conducted under the following conditions: initial pressure $0.1{\sim}0.5$ MFa, flow velocity $0.5{\sim}3.0$ m/s and water temperature $25^{\circ}C$.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.48 no.5
• /
• pp.326-328
• /
• 2022

Impacted mandibular third molar removal is the most common procedure performed by oral and maxillofacial surgeons. An array of alternative procedures have been suggested, like operculectomy in cases of pericoronitis and coronectomy in certain cases. However, these procedures pose several disadvantages, and we propose a relatively non-invasive 'straight lift technique'. This technique is specifically useful in straightening abnormally positioned mesioangular third molars as a substitute of complete removal. This can improve tooth function, eliminate the need for surgical intervention, and reduce the risk of complications associated with third molar removal.

• Journal of agricultural medicine and community health
• /
• v.16 no.2
• /
• pp.97-119
• /
• 1991

Korea has made a rapid economic development since the last three decades. This has helped Korea narrow the gap in health service differences in resource availability and in quality of care. However urban and rural differentials are still remarkable. This study has maintained that health status of rural residents is inferior to that of urban dwellers. Therefore, this study was carried out to develop policy measures for improving health services in rural areas. In order to achieve the objective of this study the authors collaborated closely and made field visits, interviews and conducted an extensive literature review regarding rural health services. The following policy options are recommended as a summary ; First, the quality of rural health personnel is a single most important factor influencing the level of rural health services. An innovative program for public health doctors to the internship and/or residency training program such as specialty board program of family medicine. Second, dissatisfaction regarding employment of public health doctors is problematic. More rational employment and deployment programs are needed to meet their personal desire. One way to do this is to make it wide open and competitive. Third this study shows how to increase physician productivity in the rural public health sector. Incentive system needs to be elaborated for the career development of rural health workers. University linked job opportunity as clinical professor is an example. Fourth, without straightening the function of health centers and subcenters, the future of rural health services is doomed to failure. Straightening primary health care is one way to enrich the program of public health facilities and reactivating the operation of health center/hospital is another. A close linkage of public facilities with private hospitals is a minimum requirement for the operation of health delivery system within a health district. Fifth, some measures are urgently required to enhance hospital services in medically underserved areas. Financial subsidy, tax exemption, long-term public loans and higher priority of health manpower deployment are some of them. Sixth, new health programs should be in tiated to meet changing needs of peoples in rural areas. Home health care program, hospice program, nursing home, residential program for the elderly are recommended.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.4
• /
• pp.54-59
• /
• 2015

In this study, effects of kneading concentration on characteristics of hardwood bleached kraft pulp (HwBKP) fibers were elucidated. A laboratory two-shaft kneader was utilized for kneading. Kneading concentration was varied in the range of 15-30% (w/w) and the number of kneading treatment was adjusted between 0 and 6 passes. It was found that kneading concentration influenced fiber characteristics. At 15% of pulp concentration, fiber length slightly increased with increasing the number of kneading passes, while other morphological properties such as fiber width and curl decreased: fiber straightening occurred. In addition, the increase in WRV and the decrease in CSF were the largest at 15% kneading concentration, meanings that fibrillation mainly occurred. In contrast, at higher kneading concentration exceeding 20%, fiber deformation like curl was mainly occurred. Also, at kneading concentration of 20% and 30%, fiber length decreased with the number of kneading passes while other morphological properties such as fiber width, and WRV increased. Severe fiber entanglement was found at 30% kneading, which shall be removed during papermaking.

• Transactions of Materials Processing
• /
• v.14 no.8 s.80
• /
• pp.704-711
• /
• 2005

The influence of process parameters in drawn wire on residual stresses was investigated. Based on a FE-simulation of the wire drawing process, the effects of process parameters such as semi-die angle, reduction, friction coefficient and bearing length on the residual stresses were investigated. The validity of the FE-simulation results was verified by the comparison of the previous simulated results with experimental data. In this study, semi-die angle and die reduction have significant effect on the residual stresses at the surface of drawn wire. Several methods such as, addition of axial tension, application of skin pass, straightening in multi-roll straightener etc, were suggested in the previous studies to reduce the residual stresses. In this study, the results show that the concurrent application of skin pass with low die reduction and low semi-die angle at the final stage of drawing operation reduces dramatically the both axial and hoop residual stresses after drawing

• 연구논문집
• /
• s.34
• /
• pp.79-85
• /
• 2004

There are several types of life test method for hose assemblies. The two major tests used for hose assemblies are impulse test and burst test. And magnification adjustment of impulse pressure, heating of testing oil and repetitive motions of bending and straightening of testing hose are also performed for accelerating the life. According to the manufacture process of hose and swaging process of fitting, there is a difference in the life of hose assemblies from minimum 7 times to maximum 40 times during the life test in the same functioning condition. Like this, the life test of hose which has a wide scope of life distribution gives a problem that observation should take a long time to find out the existence of the bursting from the beginning of the test to the completion of bursting of hose assemblies. Therefore, this research proposes a process of concentrating on the defective section of hose assemblies and maximizing the life acceleration by giving 'Knockdown stress' to hose assemblies just until before the hose assemblies get out of order.

• Imaging Science in Dentistry
• /
• v.30 no.3
• /
• pp.217-222
• /
• 2000

A 31-year-old male with the complaint of severe limitation of mouth opening was referred to our department of Chonbuk National University Hospital. The physical status of the patient was hyposthenic. Extraoral examination showed no condylar movement of the both temporomandibular joints, no pain, no facial swelling or paresthesia. Intraoral examination showed several cervical caries on the upper anterior teeth, and gingival swelling on the whole dentition. Transcranial view showed no condylar movement, and narrowing of joint spaces. Chest P-A view showed straightening of thoracic, lumbar spine, and squaring of vertebrae of the same spines. Conventional lateral radiograph of cervical spine showed calcification of the intervertebral ligament. Computed tomograph showed extensive bone formation between temporal bone and the condylar head at both sides. Laboratory findings showed positive reaction on HLA-B27 histocompatibility antigen and increased level of IgA, IgG, ESR. Based on the clinical, radiographic, and the laboratary findings, final diagnosis was made as bony ankylosis of the both temporomandibular joints secondary to ankylosing spondylitis.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.7
• /
• pp.621-627
• /
• 2008

Aerodynamic data measured in a wind tunnel has inevitable errors due to the presence of the wind tunnel walls. These unwanted interference effects must be corrected for the wall interference free aerodynamic data. Streamline curvature effects are caused by straightening of streamlines due to wind tunnel walls. Classical Glauert's correction method that is a standard method for fixed wing aircraft is not suitable for rotary wing aircraft. In this paper, Heyson's correction method of which wake model is compatible with rotors is used to correct the rotor shaft angle as well as the dynamic pressure. The results of Heyson's method are compared with Glauert's correction method.