• 한국지진공학회논문집
• /
• 제12권5호
• /
• pp.47-56
• /
• 2008

본 연구는 높은 지진의 위험이 내재된 지역에 위치한 3층, 9층 그리고 20층 철골 모멘트저항골조에 대한 반응수정계수와 주기의 영향을 평가하기 위한 것이다. 각 구조물들은 IBC 2000과 KBC 2005에서 제시하고 있는 8의 반응수정계수로 설계되었고 건물에 기대되는 최소의 성능과 최대의 성능을 평가하기 위해서 상한범위와 하한범위의 설계가 고려되었다. 또한 반응수정계수에 대한 영향을 조사하기 위하여 4개의 다른 반응수정계수들이(9, 10, 11, 12) 각 구조물에 대하여 적용되었고 각 구조물의 고유주기 값 외의 4개의 다른 주기를 추가로 적용하여 구조물의 동적거동시 주기에 대한 영향을 조사하였다. 총 150개의 해석모델들은 50년 동안 2%의 초과확률(재현 주기 2500년)을 가진 20개의 지반운동에 대하여 평가되었다. 구조물의 성능평가를 위하여 정적 Pushover와 비선형 시간이력해석이 수행되었으며 구조물의 연성능력을 평가하기 위해서 변위연성요구가 고려되었다. 3층과 9층 구조물은 변위연성요구 값이 비교적 안정적인 거동을 보인 반면 20층 구조물은 동적 불안정성을 야기하는 요소에 의해 민감하게 나타나는 것으로 조사되었다.

• 한국프랜차이즈경영연구
• /
• 제3권1호
• /
• pp.111-129
• /
• 2012

국내 프랜차이즈 산업은 매년 10% 이상의 성장률을 보이고 있는 유망사업이자 유통업의 핵심으로 부상하고 있다. 또한 베이비부머 세대의 은퇴를 비롯한 사회문화적 현상으로 인해 당분간 프랜차이즈 산업의 성장은 지속될 것으로 예상되고 있다. 그러나 국내 프랜차이즈는 몇몇 소수의 업종을 중심으로 가맹본부 및 가맹점 진출이 집중되어 있어 신규가맹점을 확보하는데 그 한계를 드러내고 있다. 이에 포화 상태에 접어든 업종 내에서의 가맹본부는 성장을 위해 새로운 업종으로의 제2, 제3 브랜드로 사업 확장을 전개하고 있으나 성공보다는 실패가 더 많은 것이 현실이다. 따라서 본 연구에서는 (주)인토외식산업의 맥주바켓 사례를 중심으로 신규 브랜드 개발 방식 및 전개 후 결과에 대해 연구하고자 한다. 본 연구의 사례 분석 결과, 프랜차이즈 가맹본사는 지속적으로 환경 조사 및 분석을 해야 하며, 조사 방법과 조사된 내용을 통해 도출 되는 내용은 객관성을 전재로 해야 한다는 것이 나타났다. 이렇게 도출된 내용을 바탕으로 신규 브랜드의 Biz-Model을 수립해야 산업 및 고객으로부터 인정을 받을 수 있는 것이다. 포화상태의 치열한 환경에 속한 프랜차이즈 본사일수록 환경의 변화에 민감하게 대응을 하고 이를 기업 활동과 연계시킬 수 있는 능력을 필요로 한다. 선행적 대응을 통한 프랜차이즈 뉴비즈니스 런칭 사례인 (주)인토외식산업의 맥주바켓 성공사례를 통해 환경변화에 따른 대응 방법에 대해 연구할 필요성을 제기한다.

• Structural Engineering and Mechanics
• /
• 제17권2호
• /
• pp.187-201
• /
• 2004

A shaking table test on a three-story one-bay steel frame model with metallic yield dampers and their parallel connection with oil dampers is carried out to study the dynamic characteristics and seismic performance of the energy dissipation system. It is found from the test that the combined energy dissipation system has favorable reducing vibration effects on structural displacement, and the structural peak acceleration can not evidently be reduced under small intensity seismic excitations, but in most cases the vibration reduction effect is very good under large intensity seismic excitations. Test results also show that stiffness of the energy dissipation devices should match their damping. Dynamic analysis method and mechanics models of these two dampers are proposed. In the analysis method, the force-displacement relationship of the metallic yield damper is represented by an elastic perfectly plastic model, and the behavior of the oil damper is simulated by a velocity and displacement relative model in which the contributions of the oil damper to the damping force and stiffness of the system are considered. Validity of the analytical model and the method is verified through comparison between the results of the shaking table test and numerical analysis.

• Smart Structures and Systems
• /
• 제26권1호
• /
• pp.63-75
• /
• 2020

Substructure pseudo-dynamic hybrid simulation (SPDHS) combining the advantages of physical experiments and numerical simulation has become an important testing method for evaluating the dynamic responses of structures. Various parameter identification methods have been proposed for online model updating. However, if there is large model gap between the assumed numerical models and the real models, the parameter identification methods will cause large prediction errors. This study presents an ANN (artificial neural network) method based on forgetting factor. During the SPDHS of model updating, a dynamic sample window is formed in each loading step with forgetting factor to keep balance between the new samples and historical ones. The effectiveness and anti-noise ability of this method are evaluated by numerical analysis of a six-story frame structure with BRBs (Buckling Restrained Brace). One BRB is simulated in OpenFresco as the experimental substructure, while the rest is modeled in MATLAB. The results show that ANN is able to present more hysteresis behaviors that do not exist in the initial assumed numerical models. It is demonstrated that the proposed method has good adaptability and prediction accuracy of restoring force even under different loading histories.

• 한국멀티미디어학회논문지
• /
• 제24권5호
• /
• pp.736-743
• /
• 2021

Due to COVID-19, the non-face-to-face content market is growing rapidly. However, most of the non-face-to-face content such as webtoons and web novels are produced based on the traditional culture of other countries, not Korean traditional culture. The biggest cause of this situation is the lack of reference materials for creating based on Korean traditional culture. Therefore, the need for materials on traditional Korean culture that can be used for content creation is emerging. In this paper, we propose a generation model of source data based on traditional folk paintings through the fusion of traditional Korean folk paintings and AI technology. The proposed model secures basic data based on folk tales, analyzes the style and characteristics of folk tales, and converts historical backgrounds and various stories related to folk tales into data. In addition, using the built data, various new stories are created based on AI technology. The proposed model is highly utilized in that it provides a foundation for new creation based on Korean traditional folk painting and AI technology.

• Structural Engineering and Mechanics
• /
• 제52권2호
• /
• pp.275-290
• /
• 2014

In this paper, Simple Adaptive Control (SAC) method is used to mitigate the detrimental effects of earthquakes on MR-damper equipped structures. Acceleration Feedback (AF) is utilized since measuring the acceleration response of structures is known to be reliable and inexpensive. The SAC is simple, fast and as an adaptive control scheme, is immune against the effects of plant and environmental uncertainties. In the present study, in order to translate the desired control force into an applicable MR damper command voltage, a neural network inverse model is trained, validated and used through the simulations. The effectiveness of the proposed AF-based SAC control system is compared with optimal H2/LQG controllers through numerical investigation of a three-story model building. The results indicate that the SAC controller is substantially effective and reliable in both undamaged and damaged structural states, specifically in reducing acceleration responses of seismically excited buildings.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.750-753
• /
• 2005

An equivalent linearization technique based on Rayleigh peak distribution for friction damper and brace system (FDBS) under stochastic excitation is proposed. For verification, shaking table test of a small scale 3-story building model with the FDBS is conducted for various slip moment levels. Using experimental result, equivalent linearization of the FDBS is conducted based on Rayleigh peak distribution, which is compared with measured peak distribution. For comparative study, model updating technique is applied based on identified modal properties. Finally, complex modal analysis and time history analysis for the obtained equivalent linear systems are conducted and compared with experimental result

• KIEE International Transactions on Power Engineering
• /
• 제5A권4호
• /
• pp.366-370
• /
• 2005

To meet increasing power demand, 500 kV power systems are under consideration in the regions of some Middle Asian countries. As the power system voltage becomes higher, the cost for the power system insulation increases significantly. 500 kV transmission systems will become the basis of a region's power system and they require much higher system reliability. Consequently, by the methods of limiting overvoltages effectively, a reasonable insulation design and coordination must be accomplished. In particular, the Substations must be constructed to be of outdoor type. In order to determine the various factors for the insulation design, the EMTP (Electro-magnetic transient program) is used for the magnification of transient phenomena of the 500 kV systems in the planned network. In this paper, we will explain the calculation results of lightning overvoltages by the EMTP for lightning protection design for the 500 kV substations. To obtain reliable results, the multi-story tower model and EMTP/TACS model are introduced for the simulation of dynamic arc characteristics.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
• /
• pp.627-630
• /
• 1996

One of the most common communication mechanisms to describe a situation or a process is a story written as an ordered sequence of events or activities. For example, a shop floor supervisor may present the operations of his manufacturing system by describing the processes of manunfacturing a product in his shop. Although IDEF3 is one of the most commonly used methods for describing a business process, but it is not common for a manufacturing process. In this study, we tried to apply IDEF3 for describing a manufacturing process. Problems and suggestions such as selection probability, programmable process modeling, manufacturing resource model were presented.

• Structural Engineering and Mechanics
• /
• 제21권4호
• /
• pp.469-494
• /
• 2005

In order to consider the modified seismic response of framed structures in the presence of masonry infills, proper models have to be formulated. Because of the complexity of the problem, a careful definition of an equivalent diagonal pin-jointed strut, able to represent the horizontal force-interstorey displacement cyclic law of the actual infill, may be a solution. In this connection the present paper, continuing a previous work in which a generalised criterion for the determination of the ideal cross-section of the equivalent strut was formulated, analizes some models known in literature for the prediction of the lateral cyclic behaviour discussing their field of validity. As a support of the discussion, the results of an experimental investigation involving single story-single bay infilled reinforced concrete. Frames under vertical and lateral loads with different kind of infill (actually not yet so much investigated) are presented. Finally, an improvement of a model known in the literature is proposed, taking the results of the experimental tests before mentioned into account.