• 정보저장시스템학회논문집
• /
• 제2권2호
• /
• pp.117-122
• /
• 2006

A novel method to find interaction dynamics between focusing direction and tracking direction in an optical pick-up is proposed. and the decoupling control to reduce the interaction effect is discussed. First, the basic principle to detect dynamic interaction analysis using back electromotive force is introduced. Second, the interaction analysis between focusing and tracking direction of is analyzed for a commercial slim type optical pick-up. Finally. decoupling control process and its simulation results are shown.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.190-193
• /
• 2008

The heat transfer characteristics of molten salt storage system for the solar thermal power generation were investigated. Temperature profiles and the heat transfer coefficients during the storage and discharge stage were obtained with the steam as the heat transfer fluid. Two kinds of inorganic salt were employed as the storage materials and coil type of heat exchanger were installed in both tanks to provide the heat transfer surfaces during the storage and discharge stage. The effects of steam flow rates, flow direction of steam in the storage tank and the initial temperature of storage and discharge tank on the heat transfer were tested.

• 한국식품저장유통학회지
• /
• 제10권3호
• /
• pp.293-296
• /
• 2003

저장온도에 따른 1,000 mL 카톤팩의 벌지를 측정하기 위하여 원지 board의 물성을 측정하고, 저장조건에 따라 벌지를 측정하였다. 카톤팩 원지의 함수율은 5.6～7.0%, stiffness는 MD(machine direction) 방향이 243.3～266.7 g/cm, CD(cross direction) 방향이 99.2～109.2 g/cm였다. 카톤팩 낱장의 중량은 29.17～31.26 g이었다. 6$^{\circ}C$에 저장하면서 벌지를 측정한 결과, 저장 7일 후 6.33～6.93 mm였다. 1$0^{\circ}C$에 저장하면서 벌지를 측정한 결과, 저장 7일 후 7.26～8.56 mm였다. 1$0^{\circ}C$에 저장하면서 매일 1시간씩 상온 shock 처리 후 벌지를 측정한 결과, 저장 7일 후 8.66 mm였다. 저장온도 조건에 따른 카톤팩의 벌지는 6$^{\circ}C$ < 1$0^{\circ}C$ < 1$0^{\circ}C$＋상온 shock순으로 증가하였다. 따라서 벌지 예방의 최선책은 원지 및 카톤팩의 보관 및 관리 철저, 그리고 충전 후 냉장유통 과정에서 온도변화를 적게 해주는 것이라고 사료되며 본 실험결과가 카톤팩 벌지에 대한 최초의 연구보고라 생각된다.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2008년도 추계학술대회
• /
• pp.151-154
• /
• 2008

The purpose of this research project is to provide information on emotional design and designs a kind of shoe storage for small space. Through researching the activities of target user and analyzing the present market, we get the clear understanding of direction for storage design, and create a new domain of for storages, with its added value and competition too. This will satisfy demand of consumers and benefit for enterprise.

• 신재생에너지
• /
• 제10권4호
• /
• pp.29-35
• /
• 2014

Non-used waste heat has recently been paid special attention due to several global warming regulation and energy cost rising. In this study, therefore, thermal energy storage system which uses a solid type heat media has been investigated about the possibility of heat accumulation and heat release for thermal energy storage system. 35kWh of bench-scale thermal storage system was used to investigate the characteristics of the solid type heat media. From the result, it is shown that a solid type heat media should be divided to supply constant heat to the customers' side. It is also shown the flow direction should be considered to reduce temperature difference between top and bottom sides in the thermal storage system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.475-480
• /
• 2000

The transient dynamic-response analysis of fuel-storage tanks of flying vehicles accelerating in the vertical direction is achieved with finite element method. A fuel-storage tank is a representative example of the fluid-structure interaction problem, in which structure and fluid media interact strongly. For the accurate analysis of this complicated fluid-structure system, we employed ALE(arbitrary Lagrangian-Eulerian) coupling method. Two types of fuel-storage tanks, one with two baffles and the other without baffle, are considered to examine the effect of baffles. The fuel-storage tank with baffles shows more uniform hydrodynamic pressure distribution, resulting effective stress in structural region and faster convergence from transient to steady states. MSC/Dytran, a commercial FEM software for the 3D coupled dynamic analysis, is used for this analysis.

• 전자공학회논문지
• /
• 제49권11호
• /
• pp.3-8
• /
• 2012

2차원 곱 부호는 저장장치 시스템에서 연집 오류를 정정하기 위해 연구되었다. RS-LDPC 곱 부호는 횡 방향의 RS 부호와 종 방향의 LDPC 부호로 이루어져 있다. 먼저 횡 방향의 RS 부호를 이용하여 연집 오류를 검출하며, 이 연집 오류의 위치 정보를 활용하여 종 방향의 LDPC 부호로 오류를 정정한다. 저장장치에서는 여러 가지 요인에 의해 연집 오류가 발생할 수 있다. 따라서 저장장치 시스템에서는 연집 오류에 강한 부호가 필요하다. RS-LDPC 곱 부호는 연집 오류에 강하다. 하지만 저장 밀도가 커지면서 연집 오류의 길이는 더 길어지게 된다. 따라서 본 논문에서는 긴 연집 오류에도 강한 특성을 보이는 LDPC-LDPC 곱 부호를 제안한다. 또한, RS-LDPC 곱 부호와 비교하여 LDPC-LDPC 곱 부호는 횡 방향으로 LDPC 부호를 사용하여 많은 램덤 오류가 발생 하였을 때 안정적인 성능 이득이 있다.

• 수산경영론집
• /
• 제37권2호
• /
• pp.111-139
• /
• 2006

Cold storage warehouse industry in Japan has been extended in its scale in terms of both the number of storages and cold storage capacity in order to meet the extended reproduction of the marine products industry. However, increasing total amount of the stored goods since mid 80s led to relative decrease of marine products while the number of storages was remained the same or decreased, though cold storage capacity was gradually increased and is maintained the increase of the average cold storage capacity. As structural change in the cold storage warehouse industry emerges, cold storage warehouses require new approach to individual storage management with 1)diversity of the stored goods; 2) more competition due to increase of the cold storage capacity; and 3) sizing of the average cold storage capacity. Therefore, this study analyzed how cold storage warehouse management activity with individual storage sizing changes; and significance of sizing and functional change in cold storage warehouses experiencing sizing, by observing leading cold storage warehouse industry of the metropolitan area in Japan. In conclusion, reorganization of cold storage warehouse industry in the metropolitan area in Japan can be summarized as follows: First, competition among cold storage warehouses in the metropolitan area in Japan is not simply limited to storage industry but extended to establishment and securing physical distribution function. Second, since cold storage warehouse industry is in Scrap & Build phase, decision of management executives on whether taking direction to maintain/continue enhancement of physical distribution function may cause drastic reorganization in the cold storage warehouse industry, Third, since profit of physical distribution management based on cold storage warehouses is insignificant, it is not easy to accomplish expected management outcome, Fourth, today's cold storage warehouse industry mainly characterized by diversity of the stored goods needs facility reorganization with comprehensive and functional integration covering from F class cold storage capacity to F&C class.

• 한국태양에너지학회 논문집
• /
• 제27권4호
• /
• pp.43-49
• /
• 2007

This study is conducted to improve the efficiency of a thermal storage tank. The thermal storage tank was designed to store heat energy that obtained from the solar or the others heat sources. However, it has difficulties in storing heat with nonuniform temperature through the entire tank with respect to the vertical direction, This study is focused on the thermal stratification to improve thermal comfort for the resident in house. To enhance temperature stratification of the tank, a distributor was designed and installed in the middle of the storage tank vertically. The vertically designed distributor could supply the return water with stratified temperature in the storage tank with respect to the height. The water velocity from the distributor hole is the same with the other outlet in the distributor. However, gravity effect on the flow in the storage tank is much higher than that of the velocity effect due to that Froude Number is less than 1. During the heat charging process in the storage tank, temperature maintained with little difference with respect to the height. However the charging process takes long time to get a effective temperature for the heating or hot water supply because of all of water in the storage tank needs to be heated.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.381-384
• /
• 2004

Delaying and objection for the construction of storage spent-fuel disposal has prompted to consider expanding on-site storage of spent reactor fuel since it can eliminate the need for costly and difficult shipping and control of the spent fuel completely under the direction of the owner-utility. The dry storage unit developed in Canada can accommodate Korea heavy water reactor fuel elements and become a candidate for the Korean market. In this paper, finite element analyses were carried out in order to investigate the structural behavior of the nuclear spent fuel dry storage system, which is subjected to impact loads such as collision of a truck load and dropping of flask under the irregular operation.