• Journal of Korea Water Resources Association
• /
• v.33 no.6
• /
• pp.701-709
• /
• 2000

Integrated storage function model (ISFM) is applied to some rainfall-runoff events of the selected basins in Korea to show validity of the proposed model. Comparing the numerical results of the model with the field measurements, the simulated hydrographs and peak flood discharges for the most part showed good agreements, except the occurrence time of the peak discharges which showed a bit discrepancy, and they showed it was very hard to have a sufficient lead-time to forecast the flood when the upstream inflow of the channel reach was more dominant than the inflow from the residual watershed of the channel.hannel.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.1
• /
• pp.63-70
• /
• 2022

Compared with hydrogen, ammonia has the advantages of high gravimetric hydrogen densities (17.8 wt.%), ease of storage and transportation as a chemical hydrogen storage medium, while its application in small-scale on-site hydrogen production scenarios is limited by the need for complex separation equipment during high purity hydrogen production. Therefore, the study of PEMFC, which can directly utilize ammonia decomposition gas, can greatly expand the application of fuel cells. In this paper, the output characteristics, fuel efficiency and the variation trend of hydrogen concentration and local current density in the anode channel of fuel cell with the output voltage of PEMFC fueled by ammonia decomposition gas were studied by experiment and simulation. The results indicate that the maximum output power of the hybrid fuel decreases by 9.6% compared with that of the pure hydrogen fuel at the same inlet hydrogen equivalent. When the molar concentration of hydrogen in the anode channel is less than 0.12, the output characteristics of PEMFC will be seriously affected. Employing ammonia decomposition gas as fuel, the efficiency corresponding to the maximum output power of PEMFC is approximately 47%, which is 10% lower than the maximum efficiency of pure hydrogen.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.8 no.1
• /
• pp.1088-1096
• /
• 1966

The following is a method of synthetic unitgraph derivation based on the routing of a time area diagram through channel storage, studied by Clark-Jonstone and Laurenson. Unithy drograph (or unitgraph) is the hydrograph that would result from unit rainfall\ulcorner excess occuring uniformly with respect to both time and area over a catchment in unit time. By thus standarzing rainfall characteristics and ignoring loss, the unitgraph represents only the effects of catchment characteristics on the time distribution of runoff from a catchment The situation abten arises where it is desirable to derive a unitgraph for the design of dams, large bridge, and flood mitigation works such as levees, floodways and other flood control structures, and are also used in flood forecasting, and the necessary hydrologie records are not available. In such cases, if time and funds permit, it may be desirable to install the necessary raingauges, pruviometers, and stream gaging stations, and collect the necessary data over a period of years. On the otherhand, this procedure may be found either uneconomic or impossible on the grounds of time required, and it then becomes necessary to synthesise a unitgraph from a knowledge of the physical charcteristics of the catchment. In the preparing the approach to the solution of the problem we must select a number of catchment characteristic(shape, stream pattern, surface slope, and stream slope, etc.), a number of parameters that will define the magnitude and shape of the unit graph (e.g. peak discharge, time to peak, and base length, etc.), evaluate the catch-ment characteristics and unitgraph parameters selected, for a number of catchments having adequate rainfall and stream data and obtain Correlations between the two classes of data, and assume the relationships derived in just above question apply to other, ungaged, Catchments in the same region and, knowing the physical characteritics of these catchments, substitute for them in the relation\ulcorner ships to determine the corresponding unitgraph parameters. This method described in this note, based on the routing of a time area diagram through channel storage, appears to provide a logical line of research and they allow a readier correlation of unitgraph parameters with catchment characteristics. The main disadvantage of this method appears to be the error in routing all elements of rainfall excess through the same amount of storage. evertheless, it should be noted that the synthetic unitgraph method is more accurate than the rational method since it takes account of the shape and tophography of the catchment, channel storage, and temporal variation of rainfall excess, all of which are neglected in rational method.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6B
• /
• pp.623-631
• /
• 2006

A new model, the periodic transient storage zone model, is developed to describe solute transport mixing in natural streams and rivers with various bottom boundaries. To assess the effects of storage zones structure on transient storage exchange, we analyze data from salt and dye injection experiments in a recirculating laboratory flume with four spatially periodic pool-riffle sequences characteristic of natural river systems under low flow conditions. Dye injections show that solute transport mixing controlled by surface shapes of both the bed and the side in channels. As no existing transient storage model could represent these effects, we developed a new axially periodic transient storage zone model that better represent the effects of channel characteristics in natural river systems. The new model is also fitted to data from salt tracer injection experiments in four reaches of the upper Sabin River, Texas, USA. The proposed model is in good agreement with the field experimental data.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.27 no.5
• /
• pp.1023-1032
• /
• 2017

When a cryptographic device such as smart card performs an encryption for a plain text, an attacker can extract the secret key in it using side channel information. Especially, many researches found some weaknesses for side channel attack on the lightweight block cipher LEA designed to apply in IoT environments. In this paper, we survey several masking countermeasures to defeat the side channel attack and propose a novel masking conversion method. Even though the proposed Arithmetic-to-Boolean masking conversion method requires storage memory of 256 bytes, it can improve the LEA encryption speed up to 17 percentage compared to the case adopted the previous masking method.

• Journal of Distribution Science
• /
• v.21 no.6
• /
• pp.13-20
• /
• 2023

Purpose: This research explores the development of music business distribution channels to attract potential customers based on the current and prior literature. As a result, the research will provide solutions for practitioners in the music distribution channel how they create effective channel in new industry phase which has experienced significant changes due to technological advancement and consumer behavior. Research design, data, and methodology: To obtain textual data in the literature storage, the author conducted content analysis. Even though there are numerous textual resources, selecting only high-quality text data that is only peer-reviewed journal articles and books consistently indicate a high degree of reliability and validity to keep the advantage form content analysis approach. Results: The present study figured out that there are five strategies to attract potential consumers in the music distribution channel, such as (1) 'Marketing Mix', (2) 'Streaming Platforms and Online Music Stores', (3) 'Brick and Mortar Stores and Concerts, and Events', (4) 'Platforms Exclusives and Limited-Edition Merchandise', and 'Partnerships and collaborations. Conclusions: In sum, the practitioners need to consider include building relationships with the fans, studying and understanding their target market, utilizing multiple available distribution channels, embracing new technologies, and analyzing the effectiveness of the adopted distribution channels.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.4
• /
• pp.99-106
• /
• 2010

In this paper, we propose an industrial fluid monitoring system which performs the flow control function and monitors fluid pressure transmitted from MFC(Mass Flow Controller) unit. This system consists of MFC unit, channel device, and monitoring management software. MFC unit transmits the measured data of the fluid pressure to the channel device which would provide the input/output interface between management software, monitoring and MFC unit. The monitoring and management software control and analyze by monitoring real time measurements of fluid pressure from each channel of MFC unit. This software can process 20 channels and 0.1 monitoring cycle which gives 200 data measurement per second (i.e., 720,000 data/hour). At this time, the storage space increases in proportion to the rise of input data. This growth of data and storage space makes loss of data access efficiency. Therefore, it demands the implementation by sensing scheme of change scope and data, which can effectively manage the data.

• Journal of Korea Water Resources Association
• /
• v.33 no.6
• /
• pp.689-699
• /
• 2000

This paper presents the integrated storage function model (ISFM) to improve the accuracy of the storage function model (SFM) which is widely employed for flood runoff analysis and its forecasting in Korea. In order to achieve this objective, the optimization method is applied for estimation of parameters of the model which dominate the accuracy of the analysis, which is usually taken by empirical formulae, and they are treated as time dependent variables. The fuzzy control technique is used to detennine the time variant parameters. In addition, the ISFM can be applied to the combined routing of the watershed and the channel with a residual watershed.ershed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2002.05b
• /
• pp.1334-1339
• /
• 2002

The objective of this study is to help practicing engineers easily use the Clark model which is used for estimating the magnitude of design flood for small stream. A representative unit hydrograph was derived on the basis of the past rainfall-runoff data and unit hydrographs, and the storage coefficient of Clark model was estimated by using hydrograph recession analysis. Since the storage coefficient(K) is a dominating factor among the parameters of Clark method, a mulitple regression formula, which has the drainage area, main channel length and slope as parameters, is propsed to estimate K value of a basin where measured data are missing. The result of regression analysis showed that there is a correlation between a storage coefficient(K) and aforemetioned three parameters in homogenious basins. A regression formular for K was derived using these correlations in a basin of Han River, Nakdong River, Young River, Kum River and Sumjin River

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.4
• /
• pp.839-846
• /
• 1994

This paper presents a simultaneous solution algorithm for one-dimensional unsteady flow routing through a dendritic channel system. This simulations solution algorithm is based on the double-sweep method and utilizes separate recursion equations for continuity, momentum and energy equations for each of the individual components of a dendritic channel system. Through separate recursion equations for each of the components. the new algorithm converts a dendritic channel network problem into a single-channel problem. The new algorithm is utilized in conjunction with a linearized unsteady flow model using full dynamic flow equations. The required computer storage for the coefficient matrix of the whole system is reduced significantly from the $2N{\times}2N$ matrix to a $2N{\times}4$ matrix, where N is the number of cross sections used in the computation of flow variables in a dendritic channel system. The algorithm presented in this paper provides an efficient and accurate modeling of unsteady flow events through a dendritic channel system.