• Title/Summary/Keyword: stop-and-go

Search Result 150, Processing Time 0.025 seconds

차량궤적자료를 이용한 SSM 산출 방법론 개발과 적용사례 분석 (Methodology for Calculating Surrogate Safety Measure by Using Vehicular Trajectory and Its Application)

  • 박성용;이청원;고승영;이용관
    • 대한교통학회지
    • /
    • 제33권4호
    • /
    • pp.323-336
    • /
    • 2015
  • Surrogate safety measure(SSM)를 이용하여 도로상의 위험을 측정하는 방식은 사고의 직접적인 원인과 연관된 차량의 거동을 분석 대상으로 한다는 장점을 가지고 있으나, 한 지점에 국한된 정보를 이용하기 때문에 위험을 연속적으로 분석하는 데에 제약이 있다. 이러한 한계를 극복하기 위해 본 연구에서는 RTK-DGPS를 이용하여 차량들의 궤적을 얻는 방안을 제시하고, 이를 통해 time-to-collision(TTC), deceleration rate to avoid collision(DRAC), acceleration noise(AN) 등의 SSM을 산출하는 데에 필요한 문제들을 고려한 방법론을 설정하였다. 또한 본 연구에서는 검토된 방법론을 이용하여 운전 중 발생하는 다양한 차량거동 변화를 관찰하기 위하여 영동고속도로 북수원IC-군포IC 구간을 대상으로 실험을 수행한 결과를 제시하였다. 그 결과 궤적 기반 SSM 지표값이 다양한 주행 상황에서의 위험성을 합리적으로 설명할 수 있음을 확인하였다. 본 연구는 향후 다양한 구간특성 및 운전자 특성에 따른 위험상황을 설명하는 연구를 수행하고, 위험구간 감지 및 위험한 운전행태의 감지를 통한 사고예방에 활용될 수 있을 것으로 판단되며, 이를 통하여 위험도로 개선 및 교통사고 줄이기 사업을 효율적으로 추진하는 데에 기여할 수 있을 것이다.

해원상생과 정신분석의 욕망이론 - 애도를 중심으로 - (Haewon Sangsaeng and the Theory of Desire in Psychoanalysis: a Comparison Focused on Mourning)

  • 김석
    • 대순사상논총
    • /
    • 제28집
    • /
    • pp.73-102
    • /
    • 2017
  • 본 논문은 정신분석이 말하는 욕망이론의 입장에서 대순사상 종지의 하나인 해원상생의 실천적 의미를 이해하면서 두 사상의 공통성과 상보성을 찾으려는 시도이다. 대순사상과 정신분석 이론은 둘 다 욕망에 중요성을 부여한다는 공통점이 있다. 대순사상의 해원이념은 애도를 통해 욕망을 복원하고 상호 주체성 구조 속에서 그것을 실현할 것을 강조하는 정신분석 이론과 통한다. 물론 종교이론인 대순사상이 말하는 욕망의 의미는 다의적이고, 욕망의 지향점도 치료 담론인 정신분석과 다르다. 하지만 대순사상은 인간이 경험하는 고통과 불행이 욕망을 제대로 풀지 못하는 상극 때문에 발생한다고 설명한다. 서로 억제하고 누르면서 고통을 만들고 있는 상태가 바로 상극이며, 해원을 통해 상극을 벗어나 상생의 세상 후천에 도달한다. 마찬가지로 정신분석은 애도를 통해 대상의 상실을 수용하면서 욕망이 다시 작동한다고 본다. 상생과 천지공사 같은 사회, 우주적 시스템의 중요성을 강조하는 대순사상은 상호주체성의 구조에서 욕망을 긍정적으로 바라보는 정신분석과 통하는 점이 있다. 대순사상과 정신분석의 사회적 실천 방향은 둘 다 보편성의 실현을 목표로 삼는다. 상호주체성 구조는 욕망의 인정과 인정의 욕망을 실천의 방향으로 제시한다. 욕망이란 개인적인 것이 아니라 사회적인 것이기 때문이다. 결론적으로 개인의 욕망을 충족시키는 데 머물 것이 아니라 공동의 선을 향해 함께 나아가야 한다.

대조차 만리포 해안의 지상 LiDAR와 MBES를 이용한 정밀 지형/수심 측량 및 조간대 접합을 통한 정밀 지형도 작성 (Construction of High-Resolution Topographical Map of Macro-tidal Malipo beach through Integration of Terrestrial LiDAR Measurement and MBES Survey at inter-tidal zone)

  • 심재설;김진아;김선정;김상익
    • 한국해안·해양공학회논문집
    • /
    • 제22권1호
    • /
    • pp.58-66
    • /
    • 2010
  • 본 논문에서는 지상 LiDAR 및 MBES(다중빔 음향측심기)를 이용하여 정밀 지형 및 수심측량을 실시하였고, 조간대 영역의 육도-해도 접합을 통하여 대조차 해안인 만리포에 대한 정밀 지형도를 작성하였다. 제한된 시간내에 조간대 영역의 충분한 지형정보 획득을 위하여 간조시 지상 LiDAR 및 DGPS를 차량지붕에 탑재하여 이동 정지 스캐닝의 해변 전체의 지형정보를 획득하였고, 이와 동시에 만조시 MBES를 통하여 수심측량을 실시하였으며 조위계 설치와 목측을 통한 조위관측의 병행을 통하여 수심보정자료 및 만리포의 평균해면 추산자료로 사용하였다. 조간대 정합을 위해 지형 및 수심자료의 수직좌표계 기준면은 인천 평균해면으로 단일화하였으며, 조간대 평균 중첩오차는 약 2~6 cm 이내로 나타났다. 또한 지상 LiDAR 자료의 정확도 검증을 위해 RTK-DGPS 측량을 동시에 실시하여 수직좌표값을 비교한 결과 평균 제곱근 오차가 약 4~7 cm 이내로 나타났다. 정밀지형도 작성은 GIS 기반 자료처리를 통하여 50 cm 해상도를 갖는 수치표고자료로 생산하였으며, 이는 현재 연안지역 침수범람 예측을 위한 폭풍해일 침수범람 예측모델의 정밀 입력자료로 사용되고 있다. 또한 장기간에 걸친 주기적 측량 자료와 측량시의 인위적 해변 변화량 및 해양환경정보를 함께 고려하여 3차원 공간분석을 실시한다면 침 퇴적양의 정확한 산출을 통하여 연안 모니터링에도 효과적으로 활용될 수 있을 것이다.

중소기업 기업가들의 사업실패비용과 사업의욕 (A Study on the Burdens of Business Failure and Entrepreneurial Intention)

  • 하규수;박배진
    • 벤처창업연구
    • /
    • 제16권1호
    • /
    • pp.87-97
    • /
    • 2021
  • 창업과 폐업을 주도하는 기업 활동의 주요 주체(player)인 기업가 연구는 기업연구에서 매우 중요하다. 회사가 경영이 악화되면 경영의 지속, 자산매각과 같은 자율적인 구조조정, 워크아웃, 도산신청 등 다양한 대안 가운데 하나를 선택해야 한다. 기업이 실패하는 경우 기업가들이 부담하는 실패비용을 제대로 파악하여야 사업가들의 사업의욕을 높이기 위한 효과적인 방안을 마련할 수 있다. 본 연구는 기업가가 인식하는 사업종결 시 발생하는 재무적 비용, 사업종결시스템, 심리적 비용이 사업의욕에 미치는 영향력을 분석하였다. 본 연구의 목적을 달성하기 위하여 중소기업을 운영하는 기업인들을 설문대상으로 하였다. 배포한 설문지 중 최종 247개를 대상으로 분석을 실시하였다. 본 연구결과 사업의욕에 영향을 미치는 유의미한 변수는 차입금, 파산제도, 사업중단 의욕으로 나타났다. 현재 기업이 폐업하는 경우 기업가들이 감당하는 비용이 지나치게 높으며, 기업가들의 사업의욕을 높이기 위해서는 사업실패 시에 부담해야 하는 재무적 비용과 심리적 비용을 완화시켜야 한다.

배우의 자아발견을 향한 여정과 인물구축을 위한 도전 (Actors' Challenging Journey to Self-discoveries in Building a Character)

  • 김준삼;김학민
    • 한국콘텐츠학회논문지
    • /
    • 제12권9호
    • /
    • pp.57-67
    • /
    • 2012
  • 배우가 어떤 과정을 통해 인물이 되는가에 관해서는 많은 혼란이 존재한다. 인물이 되어야 한다는 압박감은 배우들로 하여금 자신을 저버리고 무작정 다른 존재가 되도록 요구하고, 그에 따라 인위적이고 상투적인 연기의 함정에 빠지기 쉽다. 모든 예술은 정직하게 자기 자신에게서 시작된다. 벗어날 수 없는 일상속에 얽매인 나와 무한한 가능성을 지닌 자유로운 존재로서의 나를 구분해야만 어떻게 나에게서 시작해서 나를 버리고 나를 넘어설지를 모색할 수 있다. 살아있는 인물이 되고자 하는 배우는 연기하려고 하지 말고, 경험하려고 하여야 한다. 경험하기 위해서는 반응해야 한다. 반응하기 위해서는 오감의 경험에서 시작하여야 한다. 인물도 우리 모두와 마찬가지로, 오감의 경험에 반응하고, 반응에 반응하면서, 그리고 상상력이 빚어내는 이미지들에 반응하면서 세상에 존재하고 살아가는 것이다. 배우는 자신의 감각과 기억, 그리고 상상력만을 가친 채 극적 상황이라는 가상의 절박한 상황에 던져진다. 낯선 상황에 직면해 알지 못하는 것에 대한 두려움을 갖는 것은 자연스러운 일이나, 그 두려움에 억매여 있으면 아무것도 제대로 하지 못한다. 경험을 해가면서 인물을 내 몸과 마음이 저절로 이해하게 해야 한다. 알아서 하는 것이 아니라, 모르기 때문에 하는 것이고, 하면서 그리고 하기 때문에 알게 되는 것이다. 인물이 된다는 것은 미지의 여행에서 새로운 경험을 하면서 새로운 나를 끊임없이 발견하는 것이다.

Sand-Blasting법을 이용한 활물질/기판간 결합력 향상에 따른 AGM 연축전지의 성능 및 충방전 거동 (Performance and Charging-Discharging Behavior of AGM Lead Acid Battery according to the Improvement of Bonding between Active Material/Substrate using Sand-Blasting Method)

  • 김성준;임태섭;김봉구;손정훈;정연길
    • 한국재료학회지
    • /
    • 제31권2호
    • /
    • pp.75-83
    • /
    • 2021
  • To cope with automobile exhaust gas regulations, ISG (Idling Stop & Go) and charging control systems are applied to HEVs (Hybrid Electric Vehicle) for the purpose of improving fuel economy. These systems require quick charge/discharge performance at high current. To satisfy this characteristic, improvement of the positive electrode plate is studied to improve the charge/discharge process and performance of AGM(Absorbent Glass Mat) lead-acid batteries applied to ISG automotive systems. The bonding between grid and A.M (Active Material) can be improved by applying the Sand-Blasting method to provide roughness to the surface of the positive grid. When the Sand-Blasting method is applied with conditions of ball speed 1,000 rpm and conveyor speed 5 M/min, ideal bonding is achieved between grid and A.M. The positive plate of each condition is applied to the AGM LAB (Absorbent Glass Mat Lead Acid Battery); then, the performance and ISG life characteristics are tested by the vehicle battery test method. In CCA, which evaluates the starting performance at -18 ℃ and 30 ℃ with high current, the advanced AGM LAB improves about 25 %. At 0 ℃ CA (Charge Acceptance), the initial charging current of the advanced AGM LAB increases about 25 %. Improving the bonding between the grid and A.M. by roughening the grid surface improves the flow of current and lowers the resistance, which is considered to have a significant effect on the high current charging/discharging area. In a Standard of Battery Association of Japan (SBA) S0101 test, after 300 A discharge, the voltage of the advanced AGM LAB with the Sand-Blasting method grid was 0.059 V higher than that of untreated grid. As the cycle progresses, the gap widens to 0.13 V at the point of 10,800 cycles. As the bonding between grid and A.M. increases through the Sand Blasting method, the slope of the discharge voltage declines gradually as the cycle progresses, showing excellent battery life characteristics. It is believed that system will exhibit excellent characteristics in the vehicle environment of the ISG system, in which charge/discharge occurs over a short time.

솟는 고드름의 형성과정에 관한 관찰, 실험 및 분석 (Observation, Experiment, and Analysis of the Ice Spikes Formation)

  • 윤마병;김희수;손정호;양종우
    • 한국지구과학회지
    • /
    • 제30권4호
    • /
    • pp.454-463
    • /
    • 2009
  • 본 연구에서는 2006년 1월부터 2009년 2월까지 자연 상태에서 만들어진 솟는 고드름(n=107)을 관측, 분석하여 실험실에서 솟는 고드름을 재현할 수 있는 실험 장치를 개발했다. 이 장치를 이용하여 동영상 관측과 실험(531개의 솟는 고드름 생성)을 통해 그 생성과 성장 원리를 연구했다. 용기의 아래 부분이 위쪽 보다 더 차가운 상태에서 용기 바닥과 물 표면에서부터 얼음이 얼기 시작하는데, 표면에서 얼음이 얼지 않는 부분을 숨구멍이라고 하며 이곳으로부터 솟는 고드름이 만들어지기 시작한다. 솟는 고드름이 만들어지기 시작한 후 계속 성장하기 위해서는 용기 하부의 물이 얼음으로 변할 때의 부피 팽창 효과와 숨구멍을 통해 올라오는 과냉각수의 빠른 빙결 효과 등이 관련된다. 실험 장치에서 아이스 트레이 큐브에 증류수를 넣고, -12- $-13^{\circ}C$의 온도를 약 1시간 30분 정도 유지시키면 수면에 살얼음과 숨구멍이 생기기 시작한다. 숨구멍으로부터 생기기 시작한 솟는 고드름은 10-30분 동안 성장하고, 끝이 막히면서 성장을 멈춘다. 솟는 고드름의 형태는 7가지로 분류되며 자연 상태에서는 꼭지형과 기운형이 많았고, 실험실에서는 수직형이 가장 많았다.

발목관절 테이핑이 고령자의 균형능력에 미치는 영향 (The Effect of Ankle Joint Taping on Balance in the Elderly)

  • 이경순;이영빈;최익준;송하영;박주은;구현주;김부성;김영옥;하수종;김양지;권남정;이세인
    • 대한물리치료과학회지
    • /
    • 제19권3호
    • /
    • pp.49-56
    • /
    • 2012
  • Background : The purpose of this study is to understand the effects of ankle joint taping on balancing abilities of the elderly and to provide preliminary data on preventing falls among the elderly. Methods : In this study, 20 students(8 male, 12 female) in their 20s from D University as well as 14 elderly(4 male, 10 female) in their 70s from S community center have participated. The participants were well informed about the experiment and voluntarily participated. We measured the difference in balancing ability before and after taping between the two groups using methods such as standing on single-leg stance, TUG, and plantar pressure. Kinesio taping, a stop-watch, and the EMED-system were used as equipment along with the SPSS 12.0 program, with a significance level of 0.05, to test the difference before and after taping between the two groups. Result : First, the 70s group showed a significant increase in the dorsal flexion angle after taping. Second, the 70s group showed a significant increase in duration time of standing on one foot after taping. Third, the 70s group's TUG time was significantly shorter. Fourth, the maximum peak value for static and dynamic plantar pressure showed a significant decrease after taping; and dynamic plantar pressure area value decreased as well within significant range. Conclusion : The study has shown that taping is effective on static dynamic balancing ability of the elderly.

  • PDF

"무역상무(貿易商務)에의 역사적(歷史的) 어프로치와 무역취인(貿易取引)의 전자화(電子化)" (E-Commerce in the Historical Approach to Usage and Practice of International Trade)

  • 춘홍차
    • 무역상무연구
    • /
    • 제19권
    • /
    • pp.224-242
    • /
    • 2003
  • The author believes that the main task of study in international trade usage and practice is the management of transactional risks involved in international sale of goods. They are foreign exchange risks, transportation risks, credit risk, risk of miscommunication, etc. In most cases, these risks are more serious and enormous than those involved in domestic sales. Historically, the merchant adventurers organized the voyage abroad, secured trade finance, and went around the ocean with their own or consigned cargo until around the $mid-19^{th}$ century. They did business faceto-face at the trade fair or the open port where they maintained the local offices, so-called "Trading House"(商館). Thererfore, the transactional risks might have been one-sided either with the seller or the buyer. The bottomry seemed a typical arrangement for risk sharing among the interested parties to the adventure. In this way, such organizational arrangements coped with or bore the transactional risks. With the advent of ocean liner services and wireless communication across the national border in the $19^{th}$ century, the business of merchant adventurers developed toward the clear division of labor; sales by mercantile agents, and ocean transportation by the steam ship companies. The international banking helped the process to be accelerated. Then, bills of lading backed up by the statute made it possible to conduct documentary sales with a foreign partner in different country. Thus, FOB terms including ocean freight and CIF terms emerged gradually as standard trade terms in which transactional risks were allocated through negotiation between the seller and the buyer located in different countries. Both of them did not have to go abroad with their cargo. Instead, documentation in compliance with the terms of the contract(plus an L/C in some cases) must by 'strictly' fulfilled. In other words, the set of contractual documents must be tendered in advance of the arrival of the goods at port of discharge. Trust or reliance is placed on such contractual paper documents. However, the container transport services introduced as international intermodal transport since the late 1960s frequently caused the earlier arrival of the goods at the destination before the presentation of the set of paper documents, which may take 5 to 10% of the amount of transaction. In addition, the size of the container vessel required the speedy transport documentation before sailing from the port of loading. In these circumstances, computerized processing of transport related documents became essential for inexpensive transaction cost and uninterrupted distribution of the goods. Such computerization does not stop at the phase of transportation but extends to cover the whole process of international trade, transforming the documentary sales into less-paper trade and further into paperless trade, i.e., EDI or E-Commerce. Now we face the other side of the coin, which is data security and paperless transfer of legal rights and obligations. Unfortunately, these issues are not effectively covered by a set of contracts only. Obviously, EDI or E-Commerce is based on the common business process and harmonized system of various data codes as well as the standard message formats. This essential feature of E-Commerce needs effective coordination of different divisions of business and tight control over credit arrangements in addition to the standard contract of sales. In a few word, information does not alway invite "trust". Credit flows from people, or close organizational tie-ups. It is our common understanding that, without well-orchestrated organizational arrangements made by leading companies, E-Commerce does not work well for paperless trade. With such arrangements well in place, participating E-business members do not need to seriously care for credit risk. Finally, it is also clear that E-International Commerce must be linked up with a set of government EDIs such as NACCS, Port EDI, JETRAS, etc, in Japan. Therefore, there is still a long way before us to go for E-Commerce in practice, not on the top of information manager's desk.

  • PDF

이항대립(二項對立)으로부터의 탈주 -<오목어>에서의 매체 수행 방식 분석- (Escape from Binary Opposition -Analysis of Performative Method in -)

  • 서영주
    • 만화애니메이션 연구
    • /
    • 통권41호
    • /
    • pp.511-531
    • /
    • 2015
  • 애니메이션 영화를 탄생시킨 근원적 추동력은 움직이는 이미지에 대한 매혹이다. 그리고 애니메이션 이미지는 프레임과 프레임 사이에서 애니메이터와 장치들이 수행적 관계를 맺는 과정에서 발생한다. 때문에 이미지의 운동이 어떤 질료와 방식을 통해 구성되었는가를 살펴보는 것은 애니메이션 영화를 텍스트로 읽는 필수적 출발점이 될 것이다. 이러한 관점에서 본고는 서사의 전개와는 독립적인 차원에서 이미지 자체가 주제의식을 보다 감각적으로 전달하고 있는 한국 애니메이션 영화 <오목어>의 재료와 기법, 그리고 매체가 수행된 방식을 분석한다. <오목어>는 물 밖 세상에 대한 열망을 품은 물고기의 여정을 누들스크린으로 구현한 스톱모션 애니메이션 영화이다. 애니메이터 김진만은 한국에서 쉽게 접할 수 있는 식재료인 국수용 소면을 사용하여 누들스크린 애니메이션을 고안함으로써 <오목어>의 독창적이면서도 친근한 이미지를 만들어내었으며, 이를 통해 존재론적인 자아성찰과 세계에 대한 고찰을 불이사상(不二思想)에 기반하여 풀어내었다. 불이사상은 현상적으로 이분법적인 모습일지라도 우주의 진리는 분별이 없으며 본질적으로 하나의 괘로 작용한다는 이치로 서양의 이원론적 가치관과 달리 순환적이며 합일적인 동양철학에 기원하고 있다. 본 논문은 서양에서 유입된 애니메이션 매체를 한국 애니메이터가 어떻게 독자적으로 수용해내었고 이를 통해 구성된 이미지의 운동이 어떻게 불이사상이라는 주제의식을 효과적으로 전달하고 있는지를 밝힌다. 이를 위해 2장에서는 누들스크린의 형태와 구조를 살펴본다. 여기서는 애니메이션 매체의 초창기 시절 알렉세이프와 파커에 의해 고안된 핀스크린과의 유사성과 상이성이 분석될 것이며, 누들스크린과 핀스크린 두 기법의 미학적 가치와 특수성이 고찰될 것이다. 다음 3장에서는 이항대립적으로 제시되었던 이미지가 누들스크린의 속성을 활용하여 어떻게 초반의 대립 개념을 전복시키고 보다 풍성한 함의로 확장되는지를 살펴볼 것이다. 마지막 4장에서는 애니메이션 제작과정을 개방함으로써 애니메이션 매체의 허구적 환영성을 반영적으로 폭로하고 스크린 밖으로 펼쳐짐으로써 우리의 현상적 삶의 세계에 대해 질문하도록 하는 <오목어>의 열린 액자 형식에 대하여 알아볼 것이다. 그리고 이 모든 장에 걸쳐 화두로서의 불이사상이 어떻게 다루어지고 있는지를 살펴볼 것이다. 이를 통해 애니메이션 영화 이미지가 단순히 서사에 봉사함이 아니라 보다 독립적이고 확장적인 차원에서 개념을 전달하고 지각을 활성화시키며 통합적 감각 경험을 이끌어낼 수 있는지를 확인하고자 한다.