• Korean Chemical Engineering Research
• /
• v.44 no.5
• /
• pp.520-527
• /
• 2006

A realistic surface model is presented for prediction of various surface phenomena such as polymer deposition, suppression and sputtering as a function of incidence ion energy in high density fluorocarbon plasmas. This model followed ion enhanced etching model using the "well-mixed" or continuous stirred tank reactor (CSTR) assumption to the surface reaction zone. In this work, we suggested ion enhanced polymer formation and decomposition mechanisms that can capture $SiO_2$ etching through a steady-state polymer film on $SiO_2$ under the suppression regime. These mechanisms were derived based on experimental data and molecular dynamic simulation results from literatures. The model coefficients are obtained from fits to available beam and plasma experimental data. In order to show validity of our model, we compared the model results to high density fluorocarbon plasma etching data.

• Korean Journal of Food Science and Technology
• /
• v.36 no.2
• /
• pp.211-216
• /
• 2004

Mono-and diacylglycerol-enriched oil was produced from corn oil through enzymatic glycerolysis using 1,3-specific immobilized lipase in solvent-free system and stirred-tank batch reactor. HPLC analysis revealed enriched oil was respectively composed of: 45.05, 16.27, 23.05, and 14.98% triacylglycerol, 1,3-diacylglycerol, 1,2-diacylglycerol, and monoacylglycerol; 13.21, 0.15, 2.02, 34.36, 49.12, and 1.14 mol% palmitic, palmitoleic, stearic, oleic, linoleic, and linolenic acids; and 0.014, 0.029, 0.010 and 0.053% ${\alpha},\;{\gamma},\;{\delta}-$, and total tocopherols. Physiochemical and melting properties of enriched oil were evaluated. Oxidative stability study revealed enriched oil showed higher peroxide and p-anisidine values than corn oil. Rosemary extracts (100 to 300 ppm) reduce oxidation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4649-4655
• /
• 2010

The aim of this study was to investigate the effect of flowing the industrial wastewater effluents into the K lake which is located in the A city on the eutrophication. The lake was modelled as a continuous stirred-tank reactor. Phosphorus and Chl-a concentration in the lake were calculated to $0.29\;/m^3$과 $4.0\;g/m^3$ at steady state, respectively. Those simulated concentrations were very close to the monitored mean concentration of the lake, indicating that the simulation could be used a tool for characterizing the lake. The non-steady state concentrations of the phosphorus and Chl-a were proposed as a function of time as well. Phosphorus loading ($L_p$) and depth to retention time ratio ($H/{\tau}w$) was calculated in order to analyze the current state of eutrophication. We proposed a strategy to change the lake from eutrophic to permissible oligotrophic state using a graph consisting of two variables, $L_p$ and $H/{\tau}w$.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.5
• /
• pp.49-55
• /
• 2012

A 1.28 L-batch reactor and continuous-flow stirred tank reactor (CFSTR) fed with formate and trichloroethene (TCE) were operated for 120 days and 56 days, respectively, to study the effect of formate as electron donor on anaerobic reductive dechlorination (ARD) of TCE to cis-1,2-dichloroethylene (c-DCE), vinyl chloride (VC), and ethylene (ETH). In batch reactor, injected 60 ${\mu}mol$ TCE was completely degraded in the presence of 20% hydrogen gas ($H_2$) in less than 8 days by anaerobic dechlorination mixed-culture (300 mg-soluble protein), Evanite Culture with ability to completely degrade tetrachloroethene (PCE) and -TCE to ETH under anaerobic conditions. Once the formate was used as electron donor instead of hydrogen gas in batch or chemostat system, the TCE-dechlorination rate decreased and acetate production rate increased. It indicates that the concentration of hydrogen produced in both systems is possibly more close to threshold for homoacetogenesis process. Soluble protein concentration of Evanite culture during the batch test increased from 300 mg to 688 mg for 120 days. Through the protein monitoring, we confirmed an increase of microbial population during the reactor operation. In CFSTR test, TCE was fed continuously at 9.9 ppm (75.38 ${\mu}mol/L$) and the influent formate feed concentration increased stepwise from 1.3 mmol/L to 14.3 mmol/L. Injected TCE was accumulated at 18 days of HRT, but TCE was completely degraded at 36 days of HRT without accumulation of the injected-TCE during the left of experiment period, getting $H_2$ from fermentative hydrogen production of injected formate. Although c-DCE was also accumulated for 23 days after beginning of CFSTR operation, it reached steady-state in the presence of excessive formate. We also evaluated microbial dynamic of the culture at different chemical state in the reactor by DGGE (denaturing gradient gel electrophoresis).

• Environmental Engineering Research
• /
• v.19 no.4
• /
• pp.387-393
• /
• 2014

The purpose of this study is to evaluate integrated anaerobic hydrogen fermentation and membrane bioreactor (MBR) for on-site domestic wastewater treatment and resource recovery. A synthetic wastewater (COD 17,000 mg/L) was used as artificial brown water which will be discharged from urine diversion toilet and fed into a continuous stirred tank reactor (CSTR) type anaerobic reactor with inclined plate. The effluent of anaerobic reactor mixed with real household grey water (COD 700 mg/L) was further treated by MBR for reuse. An optimum condition maintained in anaerobic reactor was HRT of 8 hrs, pH 5.5, SRT of 5 days and temperature of $37^{\circ}C$. COD removal of 98% was achieved from the overall system. Total gas production rate and hydrogen content was 4.6 L/day and 52.4% respectively. COD mass balance described the COD distribution in the system via reactor byproducts and effluent COD concentration. The results of this study asserts that, anaerobic hydrogen fermentation combined with MBR is a potent system in stabilizing waste strength and clean hydrogen recovery which could be implemented for onsite domestic wastewater treatment and reuse.

• Journal of the Korean Applied Science and Technology
• /
• v.19 no.4
• /
• pp.273-280
• /
• 2002

Thermal decomposition of the copolymer of butyl methacylate(BMA) with styrene(St) was investigated. The copolymer Was obtained at 80 $^{\circ}C$ in a continuous stirred tank reactor(CSTR) using toluene and benzoyl peroxide(BPO), as solvent and initiator, respectively. The reactor volume was 0.3 liters and residence time was 3 hours. The thermal decomposition followed the second order kinetics for BMA/St copolymer. The activation energies of thermal decompositon were in the ranges of 38 ${\sim}43$ kcal/mol for BMA with St copolymer and a good additivity rule was observed with the composition of copolymer. The thermogravimetric trace curve agreed well with the theoretical calculation.

• KSBB Journal
• /
• v.11 no.4
• /
• pp.476-480
• /
• 1996

Using Pseudomonas sp. B3, identified and isolated from nature, wastewater containing phenol was treated in a continuous stirred tank reactor and its reaction characteristics were studied. Average concentrations of phenol and COD in effluents were 1.5mg/L and 124mg/L at 0.059h-1 dilution rate, respectively. At the dilution rate higher than 0.063h-1, phenol and COD increased abruptly to 19mg/L and 318mg/L. At the dilution rate higher than 0.059h-1, biomass concentration suddenly decreased and was "washed out". Biomass concentration was 150mg/L at a dilution rate of 0.067h-1. Maximum biomass production rate was 15.98mg/L$.$h at a dilution rate of 0.067h-1. When dilution rate increased above 0.059h-1, effluent phenol concentration abruptly increased and biomass production rate decreased. Maximum cell growth rate(${\mu}$max) and Michaelis-Mentens kinetic constant(Ks) were 0.074h-1 and 0.424mg/L, respectively. From the above result low phenol concentration can be expected at a maximum dilution rate, but reactor becomes unstable due to phenol inhibition.

• KSBB Journal
• /
• v.20 no.2 s.91
• /
• pp.100-105
• /
• 2005

Removal of nitrogen compound from waste water is essential and often accomplished by biological process. Denitrification bacterium, Paracoccus denitrificans (KCTC 2350) is employed to estimate the denitrification ability and the characteristics. In the immobilized biological reactor system, the measurement of absolute amount of active strain in the reactor is comparatively difficult or impossible. In this. study, a reactor was designed with the unwoven texture wrapped peep holed plastic tube to calculate the absolute amount of active strain by comparing the activity of the permeabilized and or immobilized reactor and the free cell reactor The reactor system was continuous stirred tank reactor and the reaction rate of substrate consumption was assumed to satisfy the Michaelis-Menten equation. The effluent concentration of nitrate and nitrite was measured to estimate the apparent parameter of Michaelis-Menten equation. As a result, we found that the amount of immobilized active strain was figured out to be half of the total active strain in the reactor and the time required to be reached in the equilibrium state in the permeabilized and or immobilized reactor system was figured out to be shorter than that of the free cell reactor system.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.542-547
• /
• 2001

A non-intrusive Planar Laser-Induced Fluorescence(PLIF) technique was applied to study the turbulent mixing process in a Rushton turbine reactor. Instantaneous and ensemble averaged concentration fields are obtained by measuring the fluorescence intensity of Rhodamine B tracer excited by a thin Nd:Yag laser sheet illuminating the whole center plane of the stirred tank. The gray level images captured by a 14-bit cooled CCD camera can be transformed to the local concentration values using a calibration matrix. The dye injection point was selected at the tank wall with three quarter height (3/4H) from the tank bottom to observe the mixing characteristics in upper bulk flow region. There exist distinct two time scales: the rapid decay of mean concentration in each region after the dye infusion reflects the large scale mixing while the followed slow decay reveals the small scale mixing. The temporal change of concentration probability functions conjectures the two sequential processes in the batch type mixing. An inactive column of water existed above the impeller disk, in which the fluid rotates with the shaft but is isolated from the mean bulk flow.

• Journal of environmental and Sanitary engineering
• /
• v.4 no.1 s.6
• /
• pp.43-52
• /
• 1989

A synthetic wastewater composed of powdered baby food and inorganic nutrients was treated by five 3.6L anaerobic reactors in order to test the relationship between solids retention time (SRT) and media surface ratio, and the removal efficiencies of organic substrate. Of the five reactors, four were semi-continuously fed stirred-tank reactors and one continuously-stirred batch reactor. The influent was 7430mg/L in COD, 7120 mg/L $BOD_L$ and 6350mg/L in $BOD_5$, respectively. Operating temperature was $35{\pm}1^{\circ}C$ and pH in the range 6.9 to 7.2. In this experimental study it was found that a linear relationship existed, within the experiment range, between SRT and media surface ratio, and that SRT and removal efficiency increased with increasing media surface ratio. The substrate removal efficiencies were 82.7 to $88.2\%$ in COD, 82.9 to $88.4\%$ in $BOD_L$ and 83.3 to $88.7\%$ in $BOD_5$, respectively.