• 제목/요약/키워드: stiffness deterioration

검색결과 140건 처리시간 0.022초

댐퍼도입에 의한 사장 케이블의 제진설계 (Design to Control Vibration for Stay Cable with Damper)

  • 김현겸;황재웅;이명재;서주원
    • 대한토목학회논문집
    • /
    • 제28권1A호
    • /
    • pp.51-58
    • /
    • 2008
  • 사장 케이블은 휨강성이 미소하여 휨변형에 관한 고유감쇠비가 매우 작다. 따라서 케이블 부재는 다른 구조부재보다 진동발생 가능성이 훨씬 높게 된다. 사장 케이블의 진동은 우수와 기류에 기인된 것과 지점운동에 기인된 것으로 대별된다. 특별히 보강형과 사장 케이블의 고유진동수 대역이 일치되는 경우를 제외하고 대부분은 우수와 기류에 기인된 진동이 발생된다. 이런 현상은 와류진동, 풍우진동, 갤로핑을 발생시키며 사장 케이블의 사용성과 내구성을 저하시킨다. 이에 대한 제어방안으로 추가감쇠비 부여(댐퍼도입)는 보편적이고 효과적인 것으로 알려져 있다. 하지만 국내는 케이블 지지교량이 활발하게 설계되고 시공됨에도 불구하고 주요 부재인 케이블의 동적설계에 관한 지침개발이 미진한 상황이다. 따라서 케이블 댐퍼도입에 관한 지침개발이 시급하다. 본 연구는 사장 케이블의 진동현상 중 댐퍼도입으로 효과적인 제어설계가 가능한 와류진동, 풍우진동, 갤로핑의 전체감쇠비 평가방법을 전개하여 풍현상에 따른 요구감쇠비 하한을 제시하고, 설치위치에 따른 유효계수가 고려된 추가감쇠비 상한과 최소설치위치를 제시하여 댐퍼도입에 의한 일관되고 체계적인 사장 케이블 제진설계 지침을 제안하고자 한다.

Whole-life wind-induced deflection of insulating glass units

  • Zhiyuan Wang;Junjin Liu;Jianhui Li;Suwen Chen
    • Wind and Structures
    • /
    • 제37권4호
    • /
    • pp.289-302
    • /
    • 2023
  • Insulating glass units (IGUs) have been widely used in buildings in recent years due to their superior thermal insulation performance. However, because of the panel reciprocating motion and fatigue deterioration of sealants under long-term wind loads, many IGUs have the problem of early failure of watertight properties in real usage. This study aimed to propose a statistical method for wind-induced deflection of IGU panels during the whole life service period, for further precise analysis of the accumulated fatigue damage at the sealed part of the edge bond. By the estimation of the wind occurrence regularity based on wind pressure return period, the events of each wind speed interval during the whole life were obtained for the IGUs at 50m height in Beijing, which are in good agreement with the measured data. Also, the wind-induced deflection analysis method of IGUs based on the formula of airspace coefficient was proposed and verified as an improvement of the original stiffness distribution method with the average relative error compared to the test being about 3% or less. Combining the two methods above, the deformation of the outer and inner panes under wind loads during 30 years was precisely calculated, and the deflection and stress state at selected locations were obtained finally. The results show that the compression displacement at the secondary sealant under the maximum wind pressure is close to 0.3mm (strain 2.5%), and the IGUs are in tens of thousands of times the low amplitude tensile-compression cycle and several times to dozens of times the relatively high amplitude tensile-compression cycle environment. The approach proposed in this paper provides a basis for subsequent studies on the durability of IGUs and the wind-resistant behaviors of curtain wall structures.

초고강도 콘크리트의 수축 균열 특성 및 구속도 평가 (Evaluation of Shrinkage Cracking Characteristics and Degree of Restraint for Ultra-High-Strength Concrete)

  • 류두열;민경환;양준모;윤영수
    • 콘크리트학회논문집
    • /
    • 제22권5호
    • /
    • pp.641-650
    • /
    • 2010
  • 콘크리트의 수축으로부터 발생하는 구속응력은 균열을 유발하고, 그에 따라 황산염 및 염화이온의 침투로 인한 철근의 부식으로 인해 콘크리트 구조물의 내구성을 저하시킨다. 특히, W/B가 감소할수록 균열 발생 가능성이 크며, 따라서 고강도 콘크리트(HSC), 초고강도 콘크리트(UHSC)의 수축 및 균열 거동의 정확한 이해와 평가가 필요하다. 하지만, 기존의 비구속 수축 실험은 콘크리트의 강도발현, 응력의 이완, 균열강도 및 구속도 등을 고려할 수 없으며, 균열 발생에 영향을 미치는 수축량의 평가에 한계가 있었다. 따라서 이 연구에서는 비구속 수축실험과 구속 수축실험(ring-test)을 통하여 W/B(30, 25, 16%) 및 혼화재에 따른 HSC, UHSC의 수축, 균열 거동을 평가하였다. 실험 결과, 자기수축 및 총 건조수축은 W/B가 클수록, 플라이애쉬(FA) 및 고로슬래그미분말(BFS)의 치환율이 증가할수록 감소하는 것으로 나타났으며, W/B의 증가 및 콘크리트 두께의 증가, FA의 혼입은 균열 발생을 효과적으로 억제하는 것으로 나타났다.

다발형 폴리아미드섬유 보강 콘크리트의 역학적 성능평가 (Evaluation on the Mechanical Performance of Concrete Using Entanglement Polyamide Fiber)

  • 전중규;김규용;전찬기;이수철
    • 한국재난정보학회 논문집
    • /
    • 제8권3호
    • /
    • pp.223-233
    • /
    • 2012
  • 콘크리트의 보강재료로 사용되고 있는 강섬유는 강성이 크고 중량이 무거워 안전관리의 어려움이 있으며, 강섬유의 부식으로 인한 내구성 저하 및 높은 리바운드 손실량이 등이 개선사항으로 요구되고 있다. 이와같이 2009년 개정된 규정에 의해 강섬유 외의 재료보강이 가능해짐에 따라 콘크리트 보강재료로서 강섬유 이외의 다양한 섬유의 적용성 검토가 필요한 실정이다. 강섬유는 기타섬유에 비해 강성이 크고, 섬유의 형상에 따라 부착성능을 개선하였만, 유기섬유의 경우 강섬유에 비해 일반적으로 탄성계수 및 인장강도가 낮고 섬유의 뭉침현상이 발생하여 콘크리트 보강재료로 사용하기 위해서는 적절한 섬유 개질이 필요한 실정이다. 이러한 관점에서, 본 연구에서는 미세섬유를 다발형 단일 개체로서 공기 압출성형을 통해 부착 비표면적을 크게 하여 역학적 성능을 고려하고, 섬유의 표면을 계면 활성제로 개질하여 분산성을 향상시킨 폴리아미드섬유와 강섬유, PP섬유를 혼입한 콘크리트를 비교하여 현장 활용을 위한 기초 자료를 제시하고자 한다.

네트형 외부 긴장재에 의한 슬래브교 보강 실험 (An Experimental Study About a Net-Type External Prestress Strengthening Method for Slab Bridges)

  • 한만엽;강태헌;최석환
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제15권5호
    • /
    • pp.136-149
    • /
    • 2011
  • 국내의 지형 특성으로 인해서 교량의 많은 부분이 슬래브교 형식이다. 차량이 대형화하고 교통량이 증가하면서 노후 슬래브교의 보강이 필요한 경우가 많다. 본 연구에서는 노후화된 슬래브교를 효과적으로 보강할 수 있는 외부 긴장재 보강공법을 제안하였다. 종방향 및 횡방향 외부 프리스트레싱을 이용한 네트형 보강법은 슬래브 중앙부의 처짐을 효과적으로 보강할 수 있는 방법이며, 하부공간을 침해하지 않으므로 실제 적용성이 뛰어나다. 실험을 통해서 제안한 보강법으로 인해서 향상되는 내하력의 크기를 검증하였다. 실험에서는 세 가지 서로 다른 하중조건에 대하여 처짐 및 변형률을 계측하여 보강의 효과를 비교, 분석하였다. 네트형 긴장재 보강 전후의 휨강성의 증가량은 재하 종류별로 30.7~107.3% 증가하였다. 보강 전후 처짐의 감소율은 27.6~52.2%에 달하였다. 종방향 및 횡방향 프리스트레싱으로 인한 네트형 보강법은 슬래브교의 중앙부 보강에 매우 효과적이며, 중앙에 집중되는 하중 뿐만 아니라 편기 재하되는 하중에 대해서도 유사한 보강효과가 있다. 또한 네트형 보강법은 필요에 따라 재긴장이 가능하므로 유지보수 및 사용성 측면에서 장점이라 할 수 있다.

노인물리치료를 위한 저항트레이닝 처방에 대한 탐색 (An Exploration on Prescription of Resistance Training for Geriatric Physical Therapy)

  • 신홍철;정동혁
    • The Journal of Korean Physical Therapy
    • /
    • 제15권1호
    • /
    • pp.61-81
    • /
    • 2003
  • There can be little dissension that the ultimate goal of all physical therapy interventions with the elderly is to restore or maintain the highest level of function possible for the individual. Whenever physical therapists take on this challenge, they assist elders in maintaining their identities as competent adults. Advancing age is associated with profound changes in body composition, including increased fat mass, decreased fat-free mass(particularly muscle), decreased total body water and decreased bone density. Along with these changes in body compositions, and perhaps as a direct result of them, elderly people have lower energy needs, reduced strength and functional capacity and a greatly increased risk for such diseases as noninsulin-dependent diabetes mellitus and osteoporosis. Resistance training is considered a promising intervention for reversing the loss of muscle function and the deterioration of muscle structure that is associated with advanced age. This reversal is thought to result in improvements in functional abilities and health status in the elderly by increasing muscle mass, strength and power and by increasing bone mineral density. In the past couple of decades, many studies have examined the effects of Resistance training on risk factors for age-related diseases or disabilities. We have explored the positive and negative aspects of older adults' participation in resistance training programs. The benefits to older adults are reported to be increased strength, endurance, muscle capacity, and flexibility; more energy; and improved self-image and confidence. The negative aspects include some pain or stiffness and other nonspecific problems. The positive and negative aspects of resistance training are therefore very similar to those in younger populations. Scientific investigations over the past 10 years have demonstrated that resistance training can be safely and successfully implemented in older populations. Even the frail and very sick elderly can benefit and improve their quality of life. Proper design and progression of a resistance training program for older adults is vital to optimal benefits from resistance exercise. The results of data provided by this research on resistance training for health shows that there is enough existing evidence to conclude that resistance training, particularly when incorporated into a comprehensive fitness program, can offer substantial health benefits which can be obtained by persons of all ages. These benefits, including improvements in functional capacity, translate into an improved quality of life.

  • PDF

Hysteretic characteristics of steel plate shear walls: Effects of openings

  • Ali, Mustafa M.;Osman, S.A.;Yatim, M.Y.M.;A.W., Al Zand
    • Structural Engineering and Mechanics
    • /
    • 제76권6호
    • /
    • pp.687-708
    • /
    • 2020
  • Openings in steel plate shear walls (SPSWs) are usually used for decorative designs, crossing locations of multiple utilities and/or structural objectives. However, earlier studies showed that generating an opening in an SPSW has a negative effect on the cyclic performance of the SPSW. Therefore, this study proposes tripling or doubling the steel-sheet-plate (SSP) layer and stiffening the opening of the SPSW to provide a solution to undesirable opening effects, improve the SPSW performance and provide the infill option of potential strengthening measures after the construction stage. The study aims to investigate the impact of SSP doubling with a stiffened opening on the cyclic behaviour, expand the essential data required by structural designers and quantify the SPSW performance factors. Validated numerical models were adopted to identify the influence of the chosen parameters on the cyclic capacity, energy dissipation, ductility, seismic performance factors (SPF) and stiffness of the suggested method. A finite Element (FE) analysis was performed via Abaqus/CAE software on half-scale single-story models of SPSWs exposed to cyclic loading. The key parameters included the number of SSP layers, the opening size ratios corresponding to the net width of the SSP, and the opening shape. The findings showed that the proposed assembly method found a negligible influence in the shear capacity with opening sizes of 10, 15, 20%. However, a deterioration in the wall strength was observed for openings with sizes of 25% and 30%. The circular opening is preferable compared with the square opening. Moreover, for all the models, the average value of the obtained ductility did not show substantial changes and the ultimate shear resistance was achieved after reaching a drift ratio of 4.36%. Additionally, the equivalent sectional area of the SSP in the twin and triple configuration of the SPSWs demonstrated approximately similar results. Compared with the single SSP layer, the proposed configuration of the twin SSP layer with a stiffened opening suggest to more sufficiency create SSP openings in the SPSW compared to that of other configurations. Finally, a tabular SPF quantification is exhibited for SPSWs with openings.

도시철도 침목플로팅궤도 분기기 망간크로싱의 손상해석 (Damage Analysis of Manganese Crossings for Turnout System of Sleeper Floating Tracks on Urban Transit)

  • 최정열;윤영선;안대희;한재민;정지승
    • 문화기술의 융합
    • /
    • 제8권5호
    • /
    • pp.515-524
    • /
    • 2022
  • 도시철도 침목플로팅궤도(STEDEF)의 분기기는 콘크리트 도상에 매입된 목침목과 침목 하부의 침목방진패드로 구성된 방진궤도로서 침목방진패드의 열화 및 이에 따른 스프링강성의 변화가 침목지지조건의 변화를 초래할 수 있다. 현재 약 21년의 공용기간 동안 발생된 망간크로싱의 손상수량은 전체 부설수량 대비 약 17%로 조사되었으며, 사용 기간 15년 이후(누적통과톤수 약 5.5억톤)부터 손상 물량이 증가하는 것으로 분석되었다. 본 연구에서는 실물 망간크로싱과 차륜의 형상을 모사한 3차원 수치모델을 이용한 매개변수 해석(차륜의 위치, 침목지지조건 및 동적 윤중의 크기)을 수행하여 실제 현장에서 발생된 망간크로싱의 손상유형 및 발생원인을 분석하였다. 연구결과, 노즈부 주변 침목에 뜬침목이 발생된 경우, 설계 궤도충격계수가 적용된 동적윤중 작용 시 노즈부 단면의 발생응력이 항복강도를 초과하였으며, 이는 실제 현장에서 발생된 손상위치와 비교적 잘 일치하는 것으로 분석되었다. 따라서 망간크로싱의 손상을 최소화하기 위해서는 노즈부 주변의 침목지지조건을 일정한 수준으로 유지하고, 손상된 망간크로싱 교체 시에는 침목 하부 경계조건의 균일성 확보를 위해 침목방진패드를 함께 교체하는 것이 바람직할 것으로 분석되었다.

100MPa급 초고강도 원심성형 콘크리트의 내구성 평가를 위한 실험연구 (Experimental Study to Evaluate the Durability of 100 MPa Class Ultra-high Strength Centrifugal Molding Concrete)

  • 김정회;김성진;이두성
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제28권1호
    • /
    • pp.12-23
    • /
    • 2024
  • 본 연구에서는 원심성형 기법을 이용하여 구조용 콘크리트 각형보를 개발하였으며, 단면의 휨강성을 확보하기 위하여 단면의 중공률은 10 %이하로 하며 이를 위하여 기존의 빈배합상태의 콘크리트가 아닌 고슬럼프(150~200)의 물성을 갖으며 설계강도가 100 MPa이상인 콘크리트 배합비를 개발하여 적용하였다. 피암터널이나 라멘소교량의 상부구조로 활용될 원심성형 PSC 각형보의 내구성을 조사하기 위하여 압축⧵강도 100 MPa급 초고강도 원심성형 콘크리트의 열화 및 내화학적 특성에 대한 내구성능을 평가하였다. 2022년과 2023년에 제작한 원심 성형 각형보 시험체에 대하여 염화물침투 저항성, 촉진탄산화 , 황산염침식 저항성, 동결융해 저항성, 스케일링 저항성 등 콘크리트의 내구성 시험을 수행하였다. 본 연구에서 검증한 내용을 고려해 볼 때 추후 제작단계에서 수밀성이 높아지는 원심성형 콘크리트의 내구성은 일반적인 콘크리트에 비해 우수한 것으로 조사되었다.

영상처리기법을 이용한 다중 변위응답 측정 알고리즘의 검증 (Verification of Multi-point Displacement Response Measurement Algorithm Using Image Processing Technique)

  • 김성완;김남식
    • 대한토목학회논문집
    • /
    • 제30권3A호
    • /
    • pp.297-307
    • /
    • 2010
  • 최근 토목, 건축 구조물의 유지관리 기술에 대한 관심이 커지고 있으며 구조물의 성능저하 및 노후화 등으로 구조적 안전성의 검토가 요구되는 구조물의 수가 급증하고 있는 실정이다. 그리고 구조물의 노후화 및 부재의 균열 등으로 인하여 강성이 저하되면 구조물의 동특성에 변화가 나타나게 되며 구조물의 실제 거동상태에서 동특성을 분석하여 손상부위와 손상정도를 정확히 판단하는 것은 중요한 문제이다. 구조물 모니터링에 사용되는 대표적 계측장비가 동적계측기이다. 기존의 동적계측기는 측정 센서와 장비를 연결하는 케이블 길이가 길어질 경우 신뢰할 수 있는 데이터를 얻기 힘들고 각 센서와 계측기를 1:1로 연결하는 방식을 취하고 있어 비경제적이다. 따라서 센서를 부착하지 않고 원거리에서 진동을 측정하는 방법이 필요하다. 구조물의 진동을 계측하기 위하여 적용 가능한 비접촉식 방법으로는 레이저의 도플러효과, GPS를 이용하는 방법 및 영상처리기법 등이 대표적이다. 레이저의 도플러효과를 이용하는 방법은 정확도가 상대적으로 높지만 비경제적이며, GPS를 이용하는 방법은 장비가 고가이고 신호 자체의 오차와 데이터 취득속도의 제약이 있는 단점이 있다. 그러나 영상신호를 이용하는 방법은 간편하고 경제적이며 접근이 어려운 구조물의 진동 및 동특성 추출에 적합하다. 기존에도 센서를 대신하여 카메라의 영상신호를 이용하는 연구가 수행되기도 하였으나, 기존의 방법은 구조물에 부착된 표적의 한 지점을 기록한 후 영상처리기법을 이용하여 진동을 측정하는 방법으로서 측정 대상이 비교적 국한적일 수 있다. 그러므로 본 연구에서는 영상처리기법을 이용하여 구조물의 다중 변위응답을 측정할 수 있는 방법의 타당성을 검증하기 위하여 진동대 실험 및 현장재하실험을 수행하였다.