• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.7
• /
• pp.841-849
• /
• 2013

In this study, a 2-step stamping model with an additional 1st stamping tool is proposed to reduce stamping flaws in the curved parts of a dimple in a nuclear fuel spacer grid. First, the strains of curved part of dimple are characterized via a comparison with strain solutions in pure bending. A reference 2D finite element (FE) model of 1-step stamping is then established, and the corresponding maximum strain is obtained. By varying the values of design variables of the 1st stamping tool in the 2-step stamping model, FE solutions are obtained to express the strain as a function of process variables, which provides the optimum values of process variables. Finally, applying these optimum values to a 3D FE model, we demonstrate the enhanced formability of the proposed 2-step stamping model.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.3
• /
• pp.209-215
• /
• 2006

Now, in this paper, going to present you with an Idea related to a new inverter of multi-step voltage source, that Is, the double-connected 12-step inverter with an auxiliary circuit. It possibly can be 24-step inverter with 3-phase voltage source which will enable us make full application even to medium and high power-level Motor drive, UPS, STATCOM, SVC, etc. in which the PWM method could not be employed. 24-step operation can be obtained from the link between the existing 12-step inverter and the additional auxiliary circuit in which the transformer of auxiliary circuit generates ripple voltage delivered to the inverter. Through a lot of experiments and simulations, (from which the validity of this scheme is confirmed,) we came to the conclusion that the increase of the primary winding number on transformer by 2N(N=1,2,3....) leads to the 12M-step(M=2,3,4...) inverter. The validity of the proposed scheme is confirmed by the simulated and experimental results.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.23-29
• /
• 2015

The baby-step giant-step algorithm seeks b in a discrete logarithm problem when a,c,p of $a^b{\equiv}c$(mod p) are already given. It does so by dividing p by m block of $m={\lceil}{\sqrt{p}}{\rceil}$ length and letting one giant walk straight toward $a^0$ with constant m strides in search for b. In this paper, I basically reduce $m={\lceil}{\sqrt{p}}{\rceil}$ to p/l, $a^l$ > p and replace a giant with an adult who is designed to walk straight with constant l strides. I also extend the algorithm to allow $2^k$ adults to walk simultaneously. As a consequence, the proposed algorithm quarters the execution time of the basic adult-walk method when applied to $2^k$, (k=2) in the range of $1{\leq}b{\leq}p-1$. In conclusion, the proposed algorithm greatly shorten the step number of baby-step giant-step.

• Journal of Internet Computing and Services
• /
• v.19 no.4
• /
• pp.71-82
• /
• 2018

As the era of the $4^{th}$ industrial revolution began, it is possible to provide smart education by utilizing various new technologies. This paper included 6 steps to prove that the educational satisfaction of students' can be improved by applying the technology of the $4^{th}$ Industrial Revolution toward smart education. The first step is to review technologies of the $4^{th}$ industrial revolution that could enable smart education. The second step is to define areas that smart education should include by adopting technologies of the $4^{th}$ industrial revolution. The third step is to extract the keyword through literature review while the keyword can constitute the smart education for the defined areas. The fourth step is to present the research model by using the extracted keyword. The fifth step is to verify the proposed research model through questionnaires. The last step is to analyze the result of questionnaires to suggest better educational method. Consequentially, the purpose of this study is to verify the effectiveness of smart education by measuring students' expectation about smart education through questionnaire. As a result, students responded that the presented factors of smart education could maximize the effect of education by increasing the satisfaction of education. Therefore, it is necessary to utilize the technology of the $4^{th}$ Industrial revolution in the education field and apply the smart education method for better education.

• Journal of Korean Association for Spatial Structures
• /
• v.12 no.4
• /
• pp.109-118
• /
• 2012

The large-space single-layer lattice dome is relatively simpler in terms of the arrangement of the various framework members and of the design of the junction than the multi-layered lattice dome, can reduce the numbers and quantity of the framework members, and has the merit of exposing the beauty of the framework as it stands. The single-layer lattice dome, however, requires a stability investigation of the whole structure itself, along with an analysis of the stress of the framework members, because an unstable phenomenon called "buckling" occurs when its weight reaches critical levels. Many researchers have systematically conducted researches on the stability evaluation of the single-layer lattice dome. No construction case of a single-layer lattice dome with a 300-m-long span, however, has yet been reported anywhere in the world. The large-space dome structure is difficult to erect due to the gigantic span and higher ceiling compared with other common buildings, and its construction cost is generally huge. The method of erecting a structure causes major differences in the construction cost and period. Therefore, many researchers have been conducting various researches on the method of erecting such structure. The step-up method developed by these authors can reduce the construction cost and period to a great extent compared with the other general methods, but the application of this method inevitably requires the development of system supports in the center section as well as pre-existing supports in the boundary sections. In this research, the safety during the construction of a single-layer lattice dome with 300-m-long span using pre-existing materials was examined in the aspect of structural strength, and the basic data required for manufacturing the supports in the application of the step-up method developed by these authors during the erection of the roof structure were obtained.

• Bulletin of the Korean Space Science Society
• /
• 2008.10a
• /
• pp.26.4-27
• /
• 2008

The completion ('initiation' de facto) of the KASI Orbit Propagator and Estimator (KASIOPEA) has been delayed for several reasons unfortunately. Due to the lack of working staffs and the Division priority rearrangement, the initial plan was dismantled and ignored for many years. However, fundamental researches regarding the essential parts of KASIOPEA has been done by author. The numerical integration module of the KASIOPEA is the most sensitive part in the precision of the final output in general. There is no silver bullet in the numerical integration in an orbit propagation as a non-stiff ODE case. Many numerical integration method like single-step methods, multi-step method, and extrapolation methods have been used in overly populated orbit propagator or estimator. In this study, several popular methods from single-step, multi-step, and extrapolation methods have been tested in numerical accuracy and stability.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.10a
• /
• pp.257-260
• /
• 2003

Dynamic simulation program for a smart UAV turbojet engine was developed. The transient simulation program utilized the CMP(Constant Mass flow) method and Euler integration method for integration of excess torque. The transient performance analysis was carried out by increasing from the idle to the maximum rotational speed of the gas generator. To observe engine dynamic behavior, fuel flow was monitored through a step and a ramp increase. When the fuel was increased as a step function the overshoot of the turbine inlet temperature exceeded the limit temperature.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.500-503
• /
• 1997

In this paper, a method for recognizing 3-D objects using the 3-D Hough transform and the robust stereo vision is studied. A 3-D object is recognized through two steps; modeling step and matching step. In modeling step, features of the object are extracted by analyzing the IGES file. In matching step, the values of the sensed image are compared with those of the IGES file which is assumed to location and orientation in the 3-D Hough transform domain. Since we use the 3-D Hough transform domain of the input image directly, the sensitivity to the noise and the high computational complexity could be significantly allcv~ated. Also, the cost efficiency is improved using the robust stereo vision for obtaining depth map image which is needed for 3-D Hough transform. In order lo verify the proposed method, real telephone model is recognized. Thc results of the location and orientation of the model are presented.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.19 no.1
• /
• pp.113-122
• /
• 1994

This study proposes a new procedure to find an initial solution to reduce the number of iterations of goal programming. The process of computing an initial solution is divided into two steps in this study. Decision variables which satisfy feasibility using Gaussian eliminations construct an initial solution reducing the iterations in the first step. It uses LHS as a tool that decision variables construct an initial solution. The initial solution which is constructed by the first step computes the updated coefficient of the objective function in the second step. If the solution does not satisfy the optimality, the optimal solution using the Modified Simplex Method is sought. The developed method doesn't reduce the overall computing time of goal programming problems, because time is more required for the process of constructing an initial solution. But The result of this study shows that the proposed procedure can reduce the large number of iterations in the first step effectively.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.419-422
• /
• 2005

Many process parameters have an effect on the auto-body panel forming process. A well-designed blank shape causes the material to flow smoothly, reduces the punch and yields a product with uniform thickness distribution. Therefore, the determination of an initial blank shape plays the important role of saving time and cost in the auto-body panel forming process. For these reasons, some approaches to estimate the initial blank shape have been implemented in this paper, the one-step approach by using a finite element inverse method will be introduced to predict the initial blank shape the developed program is applied to auto-body panel forming.