• 한국통신학회논문지
• /
• 제40권8호
• /
• pp.1507-1514
• /
• 2015

비-직교 다중접속 (NOMA: Non-Orthogonal Multiple Access)는 5G 네트워크를 위한 유망한 후보 기술이다. NOMA는 여러 사용자가 동일한 시간과 주파수 자원을 사용하기 때문에 기존의 직교 다중 접속 (OMA: Orthogonal Multiple Access) 기술보다 개선된 주파수 효율을 갖는다. Multiple-Input-multiple-output (MIMO)는 시스템 성능을 향상 시킬 수 있는 또 다른 유망한 기술이다. 본 논문에서 우리는 다중 안테나 기반의 NOMA기법의 주파수 및 에너지 효율을 다룬다. 제안된 기법에서 셀 외각 사용자는 공간 영역 (Spatial Domain)에서 다중화되고, 이것은 셀 외각 유저가 송신 안테나 인덱스를 이용하여 정보를 전송한다는 것을 의미한다. NOMA에서 셀외각 사용자의 성능은 다른 사용자의 신호로 부터 많은 영향을 받는데, 이때 다른 사용자의 신호는 잡음으로 작용한다. 제안된 기법은 기존의 NOMA에 비해 향상된 주파수 효율을 가진다. 셀 외각 사용자를 공간 영역에서 다중화함으로써 NOMA 신호의 복호 단계를 감소시킬 수 있기 때문이다. 또한, 제안된 기법은 기존의 NOMA 보다 뛰어난 에너지 효율을 갖는다. 주파수 및 에너지 효율, 복호 과정의 간소화는 기지국(Base Station)에서 다중 송신 안테나를 사용함으로 인해 얻게 된다.

• ETRI Journal
• /
• 제27권1호
• /
• pp.53-63
• /
• 2005

A compressed video bitstream is sensitive to errors that may severely degrade the reconstructed images even when the bit error rate is small. One approach to combat the impact of such errors is the use of error concealment at the decoder without increasing the bit rate or changing the encoder. For spatial-error concealment, we propose a method featuring edge continuity and texture preservation as well as low computation to reconstruct more visually acceptable images. Aiming at temporal error concealment, we propose a two-step algorithm based on block matching principles in which the assumption of smooth and uniform motion for some adjacent blocks is adopted. As simulation results show, the proposed spatial and temporal methods provide better reconstruction quality for damaged images than other methods.

• 한국소음진동공학회논문집
• /
• 제14권1호
• /
• pp.50-55
• /
• 2004

In this study, slit-tones by plane impinging jet are investigated experimentally over the whole subsonic flow range, especially at low speeds, in order to obtain the instability behaviour of impinging plane jet. Slit-tones are generated at low speeds associated with laminar shear layer instability as well as at high speeds associated with turbulent instability. Most of low-speed slit-tones are induced by symmetric mode instability unless the slit is not so wide, in which case antisymmetric modes are induced like edge-tones. It is found that the frequencies at low speeds ate controled by the unstable condition of the vortex at the nozzle exit and its pairings by which the frequencies are decreased by half. In the case of symmetric modes related with low-speed slit-tones, frequencies lower than those associated with one-step pairings are not found.

• 품질경영학회지
• /
• 제31권4호
• /
• pp.1-18
• /
• 2003

Quality is a critical competitive factor in today's environment because of the impact of quality on costs and delivery. Many companies regard quality as a key concept of company strategy in order to achieve the competitive edge. Measuring and reporting quality cost is the first step in quality management program. The supposition of quality cost model is that investment in prevention activities will bring rewards from reduced failure costs, and that further investment in prevention activities will show profits from reduced appraisal costs. In this study, the degree of quality cost deviation is conceptualized. This means a deviation between the ideal and present ranking in the amounts of quality cost categories. This study analysed that the effect of its deviation on quality management activity and performance variables. However, there are no difference in these variables. The major reason is that most of companies are endeavoring for quality management but operating quality cost system unsystematically. The review against a prevention and appraisal activity is necessary.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.86-89
• /
• 2002

In NC machining, the ability to automatically generate an optimal process plan is an essential step toward achieving automation, higher productivity, and better accuracy. For this ability, a system that is capable of simulating the actual machining process has to be designed. In this paper, a milling process simulation system for the general NC machining was presented. The system needs first to accurately compute the cutting configuration. ME Z-map(Moving Edge node Z-map) was developed to reduce the entry/exit angle calculation error in cutting force prediction. It was shorn to drastically improve the conventional Z-map model. Experimental results applied to the pocket machining show the accuracy of the milling process simulation system.

• 한국정밀공학회지
• /
• 제17권6호
• /
• pp.176-184
• /
• 2000

Reverse engineering (RE) is a process to create computer aided design (CAD) models from the scanned data of an existing part acquired using 3D position scanners. This paper proposes a novel methodology of extracting geometric features directly from a set of 3D scanned points, which utilizes the concepts of feature-based technology and artificial neural networks (ANNs). The use of ANN has enabled the development of a flexible feature-based RE application that can be trained to deal with various features. The following four main tasks were mainly investigated and implemented: (1) Data reduction; (2) edge detection; (3) ANN-based feature recognition; (4) feature extraction. This approach was validated with a variety of real industrial components. The test results show that the developed feature-based RE application proved to be suitable for reconstructing prismatic features such as block, pocket, step, slot, hole, and boss, which are very common and crucial in mechanical engineering products.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.144-146
• /
• 1994

We manufactured amorphous core for 1 KVA transformer by lap-step and one cut method, and measured the magnetic characteristics of the cores as a function of the number of ribbons per group, the number of group per set. the air gap and radius of core edge.

• 한국정밀공학회지
• /
• 제19권8호
• /
• pp.108-115
• /
• 2002

In measuring step for reverse engineering of sculptured surfaces, computer vision system is used to simplify the complicated surface by boundary edge detection method that minimizes the measuring error. The measured data by Coordinate measuring machine is clouded data points of surfaces which is segmented surface using image process. In this research, the measured data is approximated as NURBS surfaces by new suggested algorithm. The position and number of control points, selection of parametric values and compensation of weight factors are proposed. Finally, surface model is simulated and improved resulting performance is obtained.

• Transactions on Electrical and Electronic Materials
• /
• 제6권5호
• /
• pp.225-228
• /
• 2005

In this work, we studied the optimized copper thickness in Cu ECP (Electrochemical Plating). In order to select an optimized Cu ECP thickness, we examined Cu ECP bulge (bump, hump or over-plating amount), Cu CMP dishing and electrical properties of via hole and line trench over dual damascene patterned wafers split into different ECP Cu thickness. In the aspect of bump and dishing, the bulge increased according as target plating thickness decreased. Dishing of edge was larger than center of wafer. Also in case of electrical property, metal line resistance distribution became broad gradually according as Cu ECP thickness decreased. In conclusion, at least $20\%$ reduced Cu ECP thickness from current baseline; $0.8\;{\mu}m$ and $1.0\;{\mu}m$ are suitable to be adopted as newly optimized Cu ECP thickness for local and intermediate layer.

• Journal of information and communication convergence engineering
• /
• 제6권1호
• /
• pp.80-85
• /
• 2008

Images are often corrupted by noises during signal acquisition and transmission. Among those noises, additive white Gaussian noise (AWGN) and impulse noise are most representative. For different types of noise have different characters, how to remove them separately from degraded image is one of the most fundamental problems. Thus, a modified image restoration algorithm is proposed in this paper, which can not only remove impulse noise of random values, but also remove the AWGN selectively. The noise detection step is by calculating the intensity difference and the spatial distance between pixels in a mask. To divide two different noises, the method is based on three weighted parameters. And the weighted parameters in the filtering mask depend on spatial distances, positions of impulse noise and standard deviation of AWGN. We also use the peak signal-to-noise ratio (PSNR) to evaluate restoration performance, and simulation results demonstrate that the proposed method performs better than conventional median-type filters, in preserving edge details.