• 전자공학회논문지S
• /
• 제36S권2호
• /
• pp.57-62
• /
• 1999

점확산 함수(point spread function: PSF)의 정확한 주정은 복원결과가 원 영상에 얼마나 근접할 수 있는가를 결정한다는 점에서 영상처리의 중요한 연구 주체중의 하나가 된다. 본 논문에서는 PSF를 추정하기 위한 새로운 알로리즘을 제안하고, 이를 영상복원에 적용한 후 이를 기반으로 완전 디지털 자동초점 시스템을 제안한다. 자동초점시스템을 구현하기 위한 과정은 두 단계로 구성되어 있는데, 즉 에지 분류을 통한 PSF측정과, 이를 이용한 영상복원이다. 보다 구체적으로, 입력 영상을 다수의 소 영상 혹은 블록으로 분할한 뒤, 에지를 포함하고 있는 블록들로부터 단위계단응답을 구하여 평균한 후, 2차원 등방성 PSF를 추정한다. 마지막으로 추정된 PSF를 사용하여 영상복원을 수행함으로써 맞는 영상을 구한다.

• 한국전기전자재료학회논문지
• /
• 제13권9호
• /
• pp.729-734
• /
• 2000

Recently, Very Large Scale Integrated (VLSI) circuit & deep-submicron bulk Complementary Metal Oxide Semiconductor(CMOS) devices require gate electrode materials such as metal-silicide, Titanium-silicide for gate oxides. Many previous authors have researched the improvement sub-micron gate oxide quality. However, few have reported on the electrical quality and reliability on the ultra thin gate oxide. In this paper, at first, I recommand a novel shallow trench isolation structure to suppress the corner metal-oxide semiconductor field-effect transistor(MOSFET) inherent to shallow trench isolation for sub 0.1${\mu}{\textrm}{m}$ gate oxide. Different from using normal LOCOS technology deep-submicron CMOS devices using novel Shallow Trench Isolation(STI) technology have a unique"inverse narrow-channel effects"-when the channel width of the devices is scaled down, their threshold voltage is shrunk instead of increased as for the contribution of the channel edge current to the total channel current as the channel width is reduced. Secondly, Titanium silicide process clarified that fluorine contamination caused by the gate sidewall etching inhibits the silicidation reaction and accelerates agglomeration. To overcome these problems, a novel Two-step Deposited silicide(TDS) process has been developed. The key point of this process is the deposition and subsequent removal of titanium before silicidation. Based on the research, It is found that novel STI structure by the SEM, in addition to thermally stable silicide process was achieved. We also obtained the decrease threshold voltage value of the channel edge. resulting in the better improvement of the narrow channel effect. low sheet resistance and stress, and high threshold voltage. Besides, sheet resistance and stress value, rms(root mean square) by AFM were observed. On the electrical characteristics, low leakage current and trap density at the Si/SiO$_2$were confirmed by the high threshold voltage sub 0.1${\mu}{\textrm}{m}$ gate oxide.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.361-361
• /
• 2010

The separated quasi-one-dimensional ($7{\times}7$) and ($5{\times}5$) phases on vicinal Si(557) surfaces were successfully realized by changing the crystallographic orientation and thermal treatment conditions. A small change in the crystallographic orientation of the Si(557) surface stabilized the quasi-one-dimensional ($5{\times}5$) phase of a (111) facet on vicinal Si(557) surfaces and made it coexist with a quasi-one-dimensional ($7{\times}7$) phase after an optimal thermal treatment, whereas only the quasi-one-dimensional ($7{\times}7$) phase was stable on the Si(557) surface. Interestingly, this causes the (111) terraces with different widths (L) to prefer only one of the $5{\times}5$ (L=12) and $7{\times}7$ (L=9) phases resulting in long-range order of both phases along the step edge direction, which was observed by scanning tunneling microscopy (STM) and was supported by first principle calculations. In contrast, the quasi-one-dimensional ($5{\times}5$ and ($7{\times}7$) phases were arranged randomly across the step edge direction. The change of surface morphology of vicinal Si(557) surfaces will be discussed with STM images and theoretical calculations by changing crystallographic cutting angles and thermal treatment conditions.

• IEIE Transactions on Smart Processing and Computing
• /
• 제1권3호
• /
• pp.125-132
• /
• 2012

This paper proposes an automatic object segmentation and background composition method for video communication over consumer mobile phones. The object regions were extracted based on the motion and color variance of the first two frames. To combine the motion and variance information, the Euclidean distance between the motion boundary pixel and the neighboring color variance edge pixels was calculated, and the nearest edge pixel was labeled to the object boundary. The labeling results were refined using the morphology for a more accurate and natural-looking boundary. The grow-cut segmentation algorithm begins in the expanded label map, where the inner and outer boundary belongs to the foreground and background, respectively. The segmented object region and a new background image stored a priori in the mobile phone was then composed. In the background composition process, the background motion was measured using the optical-flow, and the final result was synthesized by accurately locating the object region according to the motion information. This study can be considered an extended, improved version of the existing background composition algorithm by considering motion information in a video. The proposed segmentation algorithm reduces the computational complexity significantly by choosing the minimum resolution at each segmentation step. The experimental results showed that the proposed algorithm can generate a fast, accurate and natural-looking background composition.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제37권3호
• /
• pp.170-176
• /
• 2010

무손실영상 압축에서 높은 압축률을 얻기 위해 데이터의 예측을 정확하게 하는 것은 매우 중요하다. 본 논문에서는 정확한 예측을 통해 압축률을 향상시키고 다중 해상도 기법을 사용하여 "빠른 미리보기"를 제공할 수 있는 압축 및 복원 알고리즘을 제안한다. 각 해상도의 영상이 단계적으로 처리되며 각 픽셀은 이전 단계의 픽셀 정보를 포함한 주변 픽셀 정보를 이용하여 압축되고 복원된다. 이때, 수평, 수직, 대각 경계선 정보와 평균 및 가중평균 정보를 이용해 예측함으로써 JPEG-LS 보다 3.6%, HINT보다 2.5% 좋은 엔트로피를 가지는 예측 성능을 얻을 수 있었다.

• Structural Engineering and Mechanics
• /
• 제47권4호
• /
• pp.559-573
• /
• 2013

Geometrically non-linear axisymmetric bending of a shallow spherical shell with a clamped or a simply supported edge under axisymmetric load was investigated numerically. The partial load was introduced by the Heaviside step function, and the solution was obtained by the finite difference and the Newton-Raphson methods. The thickness of the shell was considered to be uniform and the material was assumed to be homogeneous and isotropic. Sensitivity analysis was made for three geometrical parameters. The accuracy of the algorithm was checked by comparing the central deflection, the radial membrane stress at the edge, or the transverse shear force with the solutions of plates and shells in the literature and good agreement was obtained. The main findings of the study can be outlined as follows: (i) If the shell is fully loaded the central deflection of a clamped shell is larger than that of a simply supported shell provided that the shell is not very shallow, (ii) if the shell is partially loaded the central deflection of the shell is sensitive to the parameters of thickness, depth, and partial loading but the influence of the boundary conditions is negligible.

• 대한기계학회논문집
• /
• 제6권4호
• /
• pp.353-360
• /
• 1982

The determination of the natural frequencies and mode shapes for thin conical shell is an important step not only in the investigation of the dynamic response of the composite structures such as missile cone, mose firings, but also in the analysis of the acoustic behavior of bells. A Rayleigh-Ritz procedure was used to determine the natural frequencies for a certain class of mode shapes of a thin conical shell built in on the edge with the smaller radius and free on the other edge. Both bending and extensional energy are included in the analysis. This paper described the experiments on the two natural frequencies which are present in association with two preferential modal directions, as a result of imperfection of the thin conical shell. Experimental work was conducted on two different bronze conical shells. One of these was specially designed to the effects of the adding distributed mass to the end of the conical shell. The other shells were identical in all dimensions except that of the thickness to the end of the conical shell. In this paper, the effect of a adding mass to a conical shell was investigated. Experimental result was that the magnitude of the natural frequency rate and the increase of depth of beat frequency depend upon the location of adding lumped mass on the surface of the conical shell.

• 대한전자공학회논문지SP
• /
• 제41권6호
• /
• pp.25-32
• /
• 2004

본 논문에서는 스테레오 영상으로부터 자연스러우면서도 정확한 변이 정보를 추출하기 위한 변이 추정 알고리듬을 제안한다. 제안된 알고리듬은 영역 분할 기법을 이용한 계층적 변이 추정부와 편미분 방정식(PDE: Partial Differential Equation)을 이용한 에너지 기반 경계 보존 변이 평활화부로 구성되어 있다. 제안된 계층적 변이 추정 기법은 빠르면서도 신뢰도 있는 변이를 제공하며, 이러한 변이장은 정확도와 평활화도를 함께 고려한 에너지 모델의 최소화 기법에 의해 자연스럽고 정밀한 최종 변이장으로 추출된다. 에너지 모델의 최소화 과정은 대응되는 Euler-Lagrange 방정식으로 변형되어 유한차분법(FDM: Finite difference Method)을 이용한 근사화를 통해 구현된다. 실험을 통해 제안된 변이 추정 기법은 다양한 환경의 영상에 대해서도 자연스러우면서도 정확하고, 경계가 잘 보존된 변이를 추정해 낼 수 있음을 검증하였다.

• 제어로봇시스템학회논문지
• /
• 제20권7호
• /
• pp.718-723
• /
• 2014

In this paper, we developed the inspection system of electric vehicle battery plate using image processing. Four cameras are used for acquiring the principal parts of the plate, and several steps of image processing for extracting significant dimensions of the plate such as widths and lengths. As a preceding step, calibration of four cameras is carried for compensating distorted images using dot-arrayed sheet. Coordinate systems for four cameras are defined where one coordinate system is assigned to the reference coordinate system to which the others are relatively described. Line information of the edge in the windowed image is extracted using elaborate edge-detection algorithm, and finally the intersection points between lines are extracted to calculate widths and lengths of the plate from which the error status of the battery plate is decided.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.173-176
• /
• 2008

Lake studies play an important role in water management, ecology, and other environmental issues. Typically, monitoring lake levels is the first step on the lake studies. However, for the Prairie Pothole Region (PPR) of North America having millions of small lakes and potholes, on-site measurement for lake levels is almost impossible with the conventional gage stations. Therefore, we employed Geographic Information System (GIS) and remote sensing approach with the Shuttle Radar Topography Mission data to extract lake levels. Several image processing techniques were used to extract lake levels for January, 2000 as a one-time snapshot which will be useful in historic lake level reconstruction. This study is associated with other remote sensing datasets such as Landsat imagery and Digital Orthophoto Quadrangle (DOQ). In this research, firstly, image processing techniques like FFT filtering, Lee-sigma, masking with Canny Edge Detector, and contouring were tested for lake level estimation. The semi-automated contouring technique was developed to accomplish the bulk processing for large amount of lakes in this region. Also, effectiveness of each method for bulk processing was evaluated.