• Current Research on Agriculture and Life Sciences
• /
• 제17권
• /
• pp.65-70
• /
• 1999

피의 유묘 및 줄기를 사용하여, 실내에서 간편하게 제초제 저항성 개체를 선발하기 위해 실시한 실험결과를 요약하면 다음과 같다. 1. 유묘 검정법으로 6일 동안 돌피를 생육시킨 결과, 돌피의 생육이 제초제 추천량의 1/4 처리 농도에서 현저히 억제되었다. 2. Stem node 검정법으로 20일 동안 돌피를 생육시킨 결과, 돌피의 생육이 제초제 추천량의 1/2 처리 농도에서 현저히 억제되는 것으로 나타났다. 3. 유묘 검정법과 stem node 검정법을 이용한 생물검정의 결과, 유묘 검정법이 stem node 검정법 보다 빠른 시간 내에 그리고 낮은 농도의 범위에서 저항성 반응을 효과적으로 검정할 수 있었다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 춘계학술대회
• /
• pp.245-248
• /
• 1997

Excessive stress on the bone-stem interface may cause local micromotion that could produce midthigh pain, interface bone resorption and prevent bony ingrowth. It is important for clinician and prosthetic designer to develop an understanding of the load transfer mechanism, its associated stress pattern and its relationships with the particular mechanical characteristics of the femoral stem designs. Finite element method (FEM) is preeminently suited to provide information in this respect. The authors developed 3-dimensional numerical finite element models implanted with the straight stem which is composed of total 1170 elements of 8 nodes and with the curved stem which is composed of total 885 elements of 8 node, and analysed the relative micromotions between the straight stem and the curved stem in immediate postoperative stage of an uncemented total hip replacement in load simulating the single leg stance. The results showed that the rotational displacement was occupied over 90% of total micromotion in both types of stem and was peak at the proximal medial portion of the stem, but markedly less distally. The curved stem was more stable especially in terms of rotational stability. It is recommended that surgeons do not allow the patient weight bearing until bony ingrowth was achieved. In the future more attention should be drawn to increase initial rotational stability of the two types of femoral stem to prevent loosening from excessive micromotion.

• 한국작물학회지
• /
• 제41권6호
• /
• pp.704-709
• /
• 1996

모시풀의 경편과 흡지의 배양을 통하여 완전한 식물체를 대량증식하기 위하여 소독방법과 생장조절제 처리 효과에 대한 기내배양을 실시하여 다음과 같은 결과를 얻었다. 1. 모시풀 경편 배양시 소독은 초음파세체기를 이용한 2% NaClO를 20분 동안 하였을때 오염률이 3.3%로 가장 낮았으며, 식물체도 79%가 생존하였고, 건실한 묘를 생산할 수 있었다. 2. 생장조절제 처리효과에서는 NAA(0.02mg/$\ell$)+ BA(1.5mg/$\ell$) + GA3(0.1mg/$\ell$) 혼합처리가 캘러스 형성이 안되고, 식물체 형성률이 96%였으며, 건실한 묘를 생산할 수 있었다. 3. 치상부위별로는 흡지보다 경편배양이, 품종별로는 개량종인 서방종보다 재래종인 보성종이 증식효률이 높았다. 4. 순화 효율은 상토 배합과 호르몬 처리에 있어서 버미큐라이트 : 모래 ：황토 =1 : 1 : 1의 배합과 NAA 1000ppm을 30분간 담근 후 이식한 순화율이 99%로서 건실하였으며, 식물체는 대부분 정상이었다.

• 한국약용작물학회지
• /
• 제25권2호
• /
• pp.83-88
• /
• 2017

Background: This study was aimed to determine the optimal vine induction method for growing of Korean schisandra (Schisandra chinensis), by comparing plant growth and fruit yields between plants grown with either fence-type (U-type) or A-type induction. Methods and Results: Plants were transplanted on August 17, 2014, and the plant height, stem node number and weight were measured every two weeks, six times from June 17, 2016. The plant height, stem node number, and leaf length and width were higher with the A-type than with the U-type induction, by approximately 37.0%, 49.1%, 27.6%, and 12.7%, respectively. Although there was no significant difference between the photosynthesis rates of plants grown with the two vine induction method, the leaf area and leaf number per plant were higher in the plants grown with the A-type than the U-type, by approximately 23.7% and 46.0%, respectively. The number of green-color pixels, in a defined area of digital camera images of creeper leaves from the inducted vines, was significantly higher in the plants grown with the A-type than the U-type. The number of fruit clusters per plant was approximately 26 and 36, under the U-type and A-type, respectively. A two fold higher total fruit weight per plant was observed in the plants grown under the A-type (250 g/plant) than the U-type (120 g/plant). Conclusions: The A-type vine induction method is optimal for cultivation of Korean schisandra.

• 생물환경조절학회지
• /
• 제25권3호
• /
• pp.162-167
• /
• 2016

본 실험은 종자 가격이 비싼 여주를 삽목하여 증식하고자 할 때 적절한 줄기 절단위치와 삽목상내 온도를 구명하기 위하여 실험하였다. 시험품종 'NS454'(NS)와 '드레곤'(DR) 품종을 대상으로 삽수 절단 위치를 3번째 잎의 마디를 절단한 처리(I) 와 3번째와 4번째 잎의 중간 부위를 절단한 처리(II)를 하였다. 삽목상내 온도는 18, 23, 28, $35^{\circ}C$ 처리를 하였다. 삽목상내 명기는 16시간유지하였으며, 광합성유효광량자속은 약 $150-200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ 정도였으며, 상대습도는 85% 이상 유지시켰다. 그 결과 삽목 후 10일에 생존율은 두 품종 모두 $18^{\circ}C$와 $23^{\circ}C$ 처리구에서는 삽수의 절단 위치와 상관없이 100%의 생존율을 보였지만, $18^{\circ}C$ 처리구의 경우, 뿌리 발근이 되지 않아 많은 개체가 고사하게 되었다. 뿌리 발근율에 있어서는 $28^{\circ}C$ 처리구가 DR과 NS 품종 모두 삽수의 절단위치와 상관없이 100% 새뿌리가 발생하였고, $23^{\circ}C$ 처리구에서는 DR 품종의 경우 마디를 절단한 처리는 90%, 마디 중간지점을 절단한 처리는 40%이었으며 NS 품종의 경우도 마디를 절단한 처리는 50%, 중간지점을 절단한 처리는 40% 로 마디를 절단한 처리구에서 두 품종 모두 발근율이 높았다. 온도 $35^{\circ}C$ 처리구에서는 발근율이 현저하게 낮아졌으며 NS 품종의 경우는 절단위치에 상관없이 발근이 되지 않았다. 뿌리의 개체당 발근수는 DR 품종의 경우, $28^{\circ}C$ 처리구는 마디 중간지점을 절단한 처리구에서 5.3개로 처리구중에서 가장 많았고 마디를 절단한 처리구는 2.7개이었다. 따라서 여주의 삽목시 절단위치는 마디부위를 절단하거나 마디 중간지점을 절단해도 되지만 마디 중간지점을 절단하는 것이 생존율을 높일 수 있을 것으로 사료되고, 또한 삽목상내 기온을 $28^{\circ}C$ 정도를 유지해 주는 것이 바람직할 것으로 판단된다.

• 한국약용작물학회지
• /
• 제3권3호
• /
• pp.246-250
• /
• 1995

토천궁(土川芎)의 종묘비(種苗費) 절감(節減)과 증식율(增殖率)을 향상시키기 위하여 소목번식(掃木繁殖)에 대한 시험을 수행(遂行)한 결과를 요약(要約)하면 다음과 같다. 1, 삽수(揷穗)의 종류에 따른 발근률(發根率)은 1년생과 2년생에서 채취한 삽수간(揷穗間)에는 큰 차이가 없였고, 삽수(揷穗)의 부위(部位)에 따라 차이가 심하였으며, 첫째마디 부위(部位)를 삽목(揷木)할 패는 $90{\sim}l00%$, 둘째마디 부위(部位)는 $56{\sim}64%$ 발근(發根)되어 효과적이었다. 2. 1년생과 2년생에서 채취한 첫째마디 부위(部位) 삽목시(揷木時) 1개월 후에는 발근률(發根率) 90%이상, 삽수당(揷穗當) 발근수(發根數) 16개 이상, 발근장(發根長) 31cm이상 발육(發育)되었다. 2. 발근촉진(發根促進) 물질(物質)에 따른 발근상태(發根狀態)는 Rootone-F 발근처리(發根處理)와 NAA 250ppm에서 가장 효과적이었다. 4, 상토(床土)에 따른 발근률(發根率)은 모래가 18%로 가장 좋았으며, vermiculite와 perlite를 1 : 1혼합한 상토(床土)의 발근상태(發根狀態)와 유사하였고 기경지 밭흙은 현저히 감소되었다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1994년도 추계학술대회
• /
• pp.71-74
• /
• 1994

In cementless total hip arthroplasty(THA), an initial stability of the femoral component is mandatory to achieve bony ingrowth and secondary long term fixation. Bone ingrowth depends strongly on relative micromotion and stress distributions at the interface. Primary stability of the femoral component can be obtained by minimizing the magnitude of relative micromotions at bone-prosthesis interface, Hence an accurate evaluation of interface behavior and stress/strain fields in the bone implant system may be relevant for better understanding of clinical situations and improving THA design. However, complete evaluation of load transfer in the bone remains difficult to assess experimentally, Hence, recently finite element method (FEM) was introduced in orthopaedic research field to fill the gap due to its unique capacity to evaluate stress in structure of complex shape, loading and material behavior. The authors developed the 3-dimensional numerical finite element model which is composed of totally 1179 elements off and 8 node blick. We also analyzed the micromotions at the bone-stem interface and mechanical behavior of existing bone prosthesis for a loading condition simulating the single leg stance. The result indicates that the values of relative motion for this well fit Multilock stem were $150{\mu}m$ in maximum, $82{\mu}m$ in minimum, and the largest relative motion developed in medial region of proximal femur with anterior-posterior direction. The proximal region of the bone was much larger in motion than the distal region and the stress pattern shows high stress concentration on the cortex near the tip of the stem. These findings indicates that the loading in the proximal femoral bone in the early postoperative situation can produce micromotions on the interface and clinically cementless TEA patient should not be allowed weight bearing strictly early in the postoperative period.

• Tribology and Lubricants
• /
• 제13권1호
• /
• pp.82-87
• /
• 1997

The modern orthopaedics frequently uses the total hip replacement in the artificial hip joint. The wear in this joint requires a re-replacement of hip joints because it is under the severe load and friction conditions. To solve these problems the previous studies have been mainly focussed on the development of new materials. The research of new materials, however, needs much time and effort since it should be experimented for its bio-compatibility, friction, and wear characteristics. To reduce the work, in this study, the finite element analysis is applied to find new combinations of bio-materials in the total hip replacement which has the excellent contact characteristics. A non-linear FEM program MARC with 5-node axisymmetric element was used for analyzing the contact stresses between the hip joints. The computed results show that in case of acetabulum UHMWP has good characteristics, in femoral head, $Al_2O_3$, and in stem, Ti6Al4V.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1996년도 제24회 추계학술대회
• /
• pp.189-194
• /
• 1996

The modern orthopaedics frequently uses the total hip replacement in the artificial hip joint. The wear in this joint requires the re-replacement of the hip joint beacuse it is under the severe load and friction conditions. To solve these problems the previous studies have been mainly focused on the development of the new materials. The research of new material, however, needs much time and effort since it should be experimented for its bio-compatibility, friction, and wear characteristics. To reduce the work, in this study, the finite element analysis is applied to find the new combination of the materials in the total hip replacement which has the excellent contact characteristics. The finite element uses MARC and the 5-node aximetric element. The results show that in case of acetabulum UHMWP has good characteristics, in femoral head, the $Al_2O_3$, and in stem, Ti6Al4V.

• Journal of Plant Biotechnology
• /
• 제6권3호
• /
• pp.165-169
• /
• 2004

The fruits of Vitex rotundifolia in Korea, known as 'Man Hyung Ja', occupy an important position as traditional oriental medicine in Asian countries. It is known that propagation of this plant by seed is difficult and time-consuming with little success. Attempts were made to develop a method by using nodal culture techniques. Explants of stem node without leaves cultured on Nitsch medium containing 1 ml/L BA, gave the best shoot induction ratio. Also, BA with IAA or TDZ treatment showed positive effect on shoot induction. Half-strength Nitsch medium was supplemented with 0.5 mg/L NAA produced better success than did the others on root formation. It showed that many of the regenerants grew successfully on growth chamber at $24^{\circ}c$.