• Journal of Korean Society of Forest Science
• /
• v.108 no.4
• /
• pp.592-599
• /
• 2019

This study aimed to develop an equation for estimating stem volume for Larix kaempferiin South Korea using independent variables, diameter at breast height (DBH), and height as being closely associated with stem volume. Analysis was conducted on the growth performance of 2,840 Larix kaempferi samples across South Korea after felling them and gleaning diameter data according to both stem height and stem analyses. In order to test the fitness of six different stem taper equations, empirical assessment was conducted for fitness index (FI), bias, mean, and absolute deviation (MAD), and coefficient variation (%CV). The two selectedmodels found to be optimal were the following: model one (V=a+bDBH²), established by employing DBH only; and model four (V=a+bDBH²H), established by utilizing DBH and height, respectively. The findings of non-linear regression indicated statistical significance (p < 0.05) in a and b, which were the coefficients for the intercepts and slopes of the models. The FI of the models ranged between 94% and 99%, and the bias was close to zero, while MAD ranged from 0.01 to 0.05, and %CV from 5.97 to 14.43, indicating a high level of fitness. Thus, using the suggested models, the basic information necessary for forest management was obtained, and an estimation of the stem volume was effected without delay soon after effecting DBH and height measurements.

• Journal of Forest and Environmental Science
• /
• v.33 no.4
• /
• pp.315-321
• /
• 2017

This study was carried out to estimate the parameters of stem taper functions, to figure out the best taper model by species, and to compare with previous studies by species, targeting on the stemmed tree samples collected from the Korean red pine (Pinus densiflora), Korean white pine (Pinus koraiensis), and Japanese larch (Larix kaempferi ) stands in Gangwon and North Gyeongsang provinces of South Korea. The seven widely used models were applied in this study, and Muhairwe 1999 model for Korean red pine and Korean white pine and Kozak 2002 model for Japanese larch were evaluated as the best model for each species according to the fit statistics and the predicted stem form comparison. In addition, the predicted diameter was suitably fitted when comparing the previous studies, and the values were more appropriate following stem taper according to neiloid, paraboloid, and cone parts by species. Consequently, the estimation of this study was considered to represent the stem taper well. When comparing stem taper of three species, the diameter was largest in Korean white pine. Overall, the taper models of this study are judged to be useful for estimating stem form and volume computation of Korean red pine, Korean white pine, and Japanese larch.

• Journal of Engineering Education Research
• /
• v.23 no.4
• /
• pp.37-51
• /
• 2020

This study examined the differential effects of High-Impact Practices(HIPs) on the career aspiration of STEM college students by gender. Through the theoretical lens of Social Cognitive Career Theory(SCCT), a two-level model analysis was conducted. A sample of 2,101 third- and fourth-year undergraduate students majoring in STEM at 38 universities, which had been collected from the National Survey on College Student Experiences and Learning Outcomes funded by the Korea Research Foundation, was used. This study found that the three HIP domains(learning with peers, faculty support, content relevancy) had different influences depending on gender. These findings suggest that HIPs can benefit the development of female students' career aspiration and have gender-differential effects on students in STEM majors. Based on those findings, this study also deduced implications about the roles of faculty members and higher-education institutions that might foster the retention of women in STEM.

• Journal of Korean Society of Forest Science
• /
• v.83 no.4
• /
• pp.521-530
• /
• 1994

Voume functions, which are usually expressed by the function of dbh and height, are estimated commonly through the regression analysis with the highest statistical accuracy considered. In Korea, general volume functions for each tree species were prepared by means of the regression analysis with the exponential function ($V=aD^bH^c$) having the dbh(D) and height(H) as independent variables. In this study, regional stem curve functions for the Pinus densiflora in Kangwon-province were derived and a regional volume function model, in which the stem volume can be directly estimated through the rotational integral of the regional stem curve functions, was prepared. The regional volume estimated by the prepared model was more accurate than the volume by the general volume table for the Pinus densiflora in Kangwon-province. Additionary, the form of stem curves derived by the regional stem curve functions showed difference from each other. The stem in Youngwol and Wonju taper down more fast in upper part than that in other regions. These various stem forms also led to the regional difference in volume estimates.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.5 s.54
• /
• pp.25-31
• /
• 2003

Numerical experiments have been conducted using the nonlinear combined refraction-diffraction model, in order to analyze the generation characteristics of stem wave, which is formed by the interaction between vertical structure and the oblique incident waves. The results of stem wave are discussed through the stem wave height distribution along/normal vertical structure, under the wide range of incident wave conditions-wave heights, periods, depths, and angles. Under the same wave height and period, the larger the incident wave angle, the higher the stem wave heights. According to the results of wave height distribution, in front of vertical structure, the maximum of stern wave heights occurs in the location bordering the vertical wall. Furthermore, the most significant result is that stem waves occur under the incident angles between $0^{\circ}\;and\;30^{\circ}$, and the stem wave height ratio has the maximum value, which is approximately 1.85 times the incident wave height when the incident wave angle becomes $23^{\circ}$.

• Korean Journal of Clinical Pharmacy
• /
• v.28 no.1
• /
• pp.24-29
• /
• 2018

Background: Cyclosporine is an immunosuppressive agent used to treat and prevent graft versus host reaction (GVHR)-a complication associated with stem cell transplantation. This study aimed to develop a population pharmacokinetic model of cyclosporine and investigate factors affecting cyclosporine clearance in pediatric hematopoietic stem cell transplant patients. Methods: A total of 650 cyclosporine concentrations recorded in 65 patients who underwent hematopoietic stem cell transplantation were used. Data including age, sex, weight, height, body surface area (BSA), type of disease, chemotherapy before stem cell transplantation, type of donor, serum creatinine levels, total bilirubin concentration, hematocrit value, and type of concomitant anti-fungal agents and methylprednisolone used were retrospectively collected. Data related to cyclosporine dosage, administration time, and blood concentration were also collected. All data were analyzed using the non-linear mixed effect model; a two-compartment model with first-order elimination was used. Results: The population pharmacokinetic model of cyclosporine using the NONMEM program was as follows: $CL(L/h)=5.9{\times}(BSA/1.2)^{0.9}$, V2 (L) = 54.5, Q (L/h) = 3.5, V3 (L) = 1080.0, $k_a(h^{-1})=0.000377$. BSA was selected as a covariate of cyclosporine clearance, which increased with an increase in BSA. Conclusion: A population pharmacokinetic model for Korean pediatric hematopoietic stem cell transplant patients was developed, and the important factor affecting cyclosporine clearance was found to be BSA. The model might contribute to the development of the most appropriate dosing regimen for cyclosporine. Further studies on population pharmacokinetics should be carried out, prospectively targeting pediatric patients.

• Molecular & Cellular Toxicology
• /
• v.3 no.2
• /
• pp.77-84
• /
• 2007

Millions of individuals worldwide are currently afflicted with neurodegenerative disorders such as Parkinson's disease and multiple sclerosis which are caused by the death of specific types of specialized cells in the Central Nervous System (CNS). Recently, Neural Stem Cells (NSCs) are able to replace these dead cells with new functional cells, thereby providing a cure for devastating neural diseases. The clinical use of neural stem cells (NSCs) for the treatment of neurological diseases requires overcoming the scarcity of the initial in vivo NSC population. Thus, we developed a novel 3-dimentional cellular automata model for optimum production of neural stem cells and their derivatives in large scale to treat neurodegenerative disorder patients.

• Journal of The Korean Association of Information Education
• /
• v.17 no.2
• /
• pp.177-189
• /
• 2013

According to a comparison study of international academic achievements, Korean students showed high academic achievements in science and mathematics, whereas their learning motivation appeared relatively low. Therefore, this work developed the robot-based STEM integrated education program reflecting an engineering class model. The title of the program is determined as 'animals' which are included in one section of the fourth grade science curriculum, are friendly to students, and are effective for robot application. Robot-based STEM program is consisted of three areas: robot education, subject-related course learning, and engineering education. The STEM program was reviewed by 14 teachers. The study result presented that regardless of knowledge of robot, most teachers gave positive response to program goal, composition of contents, application of robot.

• Journal of The Korean Association For Science Education
• /
• v.34 no.2
• /
• pp.63-78
• /
• 2014

Integrative STEM education is an engineering design-based learning approach that purposefully integrates the content and process of STEM disciplines and can extend its concept to integration with other school subjects. This study was part of fundamental research to develop an integrative STEM education program based on the science inquiry process. The specific objectives of this study were to review relevant literature related to STEM education, analyze the key elements and value of STEM education, develop an integrative STEM education model based on the science inquiry process, and suggest an exemplary program. This study conducted a systematic literature review to confirm key elements for integrative STEM education and finally constructed the integrative STEM education model through analyzing key inquiry processes extracted from prior studies. This model turned out to be valid because the average CVR value obtained from expert group was 0.78. The integrative STEM education model based on the science inquiry process consisted of two perspectives of the content and inquiry process. The content can contain science, technology, engineering, and liberal arts/artistic topics that students can learn in a real world context/problem. Also, the inquiry process is a problem-solving process that contains design and construction and is based on the science inquiry. It could integrate the technological/engineering problem solving process and/or mathematical problem solving process. Students can improve their interest in STEM subjects by analyzing real world problems, designing possible solutions, and implementing the best design as well as acquire knowledge, inquiry methods, and skills systematically. In addition, the developed programs could be utilized in schools to enhance students' understanding of STEM disciplines and interest in mathematics and science. The programs could be used as a basis for fostering convergence literacy and cultivating integrated and design-based problem-solving ability.

• Journal of Biosystems Engineering
• /
• v.16 no.1
• /
• pp.37-48
• /
• 1991

Rice plants are subjected to various forces such as natural force of wind and mechanical force of cultivating machines. Rheological behavior of the rice stem can be expressed in terms of three variables : stress, relaxation and time. The objectives of this study are to examine stress relaxation, creep and recovery characteristics on the rice stem in case of axial and radial loading. Stress relaxation with time was studied on three levels of loading rate and on four levels of applied stress. The results were summarized as follows : 1. The hysterisis losses of the rice stem distinctly observed at the radial compression in comparison with axial compression. The hysterisis loss implied that the stem to absorbed energy without being deformed beyond the yield point. 2. Ageneralized Maxwell model consisting of three elements gave a good description of the relaxation behavior of the rice stem. Rate of loading was more significant on the observed relaxation behavior within the short relaxation time, but there were little influences of rate of loading on the relaxation time. 3. The stress relaxation intensity and the residual stress increased in magnitude as the applied stress increased, but the relaxation time was little affected by the applied stress. 4. The coefficients of the stress relaxation model showed much differences in the radial compression and the axial compression, especially the higher relaxation stress of the third element was observed in the radial compression. 5. The behaviors of rice stem in creep and recovery test also might be represented by a four element Burger's model. But the coefficients of the creep model were different from those of the recovery model. 6. The steady-state phenomena of creep appeared at the stress larger than 20 MPa in Samkang and 1.8 MPa in Whajin. 7. The elastic modulus of the stem showed the range from 40 to 60 MPa. It could be considered, as a result, the rice stems had viscoelastic properties.