• 수산해양기술연구
• /
• 제35권2호
• /
• pp.201-208
• /
• 1999

To develop a new fish cage which is required for offshore or moving cage culturing system has been gradually increased against being closely dense of fish cage in shallow water. Though submersible fish cage culturing system is essential technology for converting from shallow water into the offshore, it was pointed out the serious problem about stability of which are sinking and floating state. This study is presented conceptual design of submersible fish cage centered with a mooring steel pile to acquire stability and faculty. Design of mooring steel pile for submersible fish cage culturing system needs to carry out optimal design of mooring steel pile for which much efforts are required. Formulation and optimal design process of submersible fish cage are organized into using Sequential Quadratic Programming method of numerical optimization. For submersible fish cage system centered with a mooring steel pile, process of the optimal design is proposed and the optimal solutions are obtained.

• Ocean and Polar Research
• /
• 제23권3호
• /
• pp.305-310
• /
• 2001

This paper describes a floating fish reef technology for enhancement of fisheries productivity in the muddy areas. The floating fish reef was composed of main fish cage, anchor rope and concrete anchor blocks. Main fish cage was made up of 12 steel buoys measuring 0.37m in diameter and 1.5m long, polyethylene (PE) netting and circular steel rings. Each steel buoy had buoyancy of 110kgf. The size of main fish cage was 1.96 m in diameter and 3.75m in length. Monitoring on its durability was made for eight months after installation. The steel buoys fixed on main fish cage and nettings were observed to be kept safely. The wet weight of fouling organisms per unit area$(m^2)$ was 26.6kgf after eight months. Reduction in the cross-section of steel buoys and circular steel rings of main fish cage were not found. In addition, any cracks on the concrete anchor blocks were not observed.

• Steel and Composite Structures
• /
• 제8권4호
• /
• pp.329-342
• /
• 2008

The strengthening of reinforced concrete (RC) columns by steel angles and strips (steel cage) is one of various techniques available to increase ultimate column load. Different authors have shown the influence of the beam-column joint on the behaviour of columns strengthened by steel cages. This paper presents an experimental study carried out at the Universidad Polit$\acute{e}$cnica de Valencia with the aim of analysing two different techniques to solve the strengthening close to the joint and the influence on the behaviour of RC columns strengthened steel cages. The ultimate loads obtained in the laboratory tests for these two techniques are compared to that specified by Eurocode 4.

• 한국산학기술학회논문지
• /
• 제5권5호
• /
• pp.462-465
• /
• 2004

본 알루미늄 용해반사로 gas배출기의 bag cage에서 사용 6개월 만에 균열이 발생하였다. 이러한 bag cage의 용접부에서 발생한 균열의 원인조사를 위해 bag cage의 성분분석, 용접부에서의 파단면과 미세조직을 SEM과 금속현미경으로 관찰한 결과 bag cage의 균열의 원인이 배기가스중의 황화물과 대기중의 습기, 산소와 반응에 의해 형성된 polythionic acid이 생성되어 용접에 의해 예민화된 부위에 부식을 일으켰다는 것을 확인할 수 있었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 춘계 학술논문 발표대회 학계
• /
• pp.29-32
• /
• 2009

Building foundations for Top-Down construction require a special setting, because the foundations have to be placed way before excavation for the substructure of main building, Usually, the foundation goes into the layer of rock and it is often called rock-pier foundation, Currently, a cage of steel reinforcing bars is inserted to the pre-excavated hole in the rock layer, hanging down from the wide flange steel column above. This paper presents a new method for connecting the prefounded column and the steel cage with a coupler for better connection between the two, The use of a circular Concrete Filled Tube (CFT) as a prefounded column makes it possible to have this type of connection. The details of the connection and application to a Top-Down construction site is also included in this paper.

• Composites Research
• /
• 제14권3호
• /
• pp.77-89
• /
• 2001

초고속 일체형 주축의 공진주파수가 일체형 주축 시스템의 모터 회전자의 질량과 주축의 굽힘 강성에 의존하기 때문에 초고속 주축 시스템의 동적 특성을 향상시키기 위해 주축과 회전자를 각각 고분자 기지 섬유강화 복합재료와 자성분말이 함침된 에폭시 수지를 이용하여 설계하였다. 설계된 복합재료 회전자의 자기 특성을 향상시키기 위해 내부에 강철 코어를 삽입하였으며, 강철 코어와 전도체 봉의 기하학적 형상의 변화가 전동기의 성능에 미치는 효과를 파악하기 위해 자기 해석을 수행하였다. 유한요소해석을 통해 복합재료 회전자의 최적의 기하학적 조건을 제안하였다. 또한 복합 재료 회전자 재료의 열특성을 파악하기 위해 TMA, DMA및 VSM을 이용한 기계적, 전자기적 물성측정을 수행하여 복합재료 회전자의 최적 설계에 적용하였다.

• 전산구조공학
• /
• 제21권4호
• /
• pp.55-60
• /
• 2008

• Computers and Concrete
• /
• 제31권4호
• /
• pp.293-306
• /
• 2023

This study proposes and demonstrates a smart monitoring system that uses transmission lines embedded in a reinforced concrete structure to detect the presence of defects through changes in the electromagnetic waves generated and measured by a time-domain reflectometer. Laboratory experiments were first conducted to identify the presence of voids in steel-concrete composite columns. The results indicated that voids in the concrete caused a positive signal reflection, and the amplitude of this signal decreased as the water content of the soil in the void increased. Multiple voids resulted in a decrease in the amplitude of the signal reflected at each void, effectively identifying their presence despite amplitude reduction. Furthermore, the electromagnetic wave velocity increased when voids were present, decreased as the water content of the soil in the voids increased, and increased with the water-cement ratio and curing time. Field experiments were then conducted using bored piles with on-center (sound) and off-center (defective) steel-reinforcement cage alignments. The results indicated that the signal amplitude in the defective pile section, where the off-center cage was poorly covered with concrete, was greater than that in the pile sections where the cage was completely covered with concrete. The crosshole sonic logging results for the same defective bored pile failed to identify an off-center cage alignment defect. Therefore, this study demonstrates that electromagnetic waves can be a useful tool for monitoring the health and integrity of reinforced concrete structures.

• 한국가구학회지
• /
• 제10권2호
• /
• pp.17-27
• /
• 1999

As a countermeasure to reach self-sufficiency for wood supply and demand, we have to develop wood substitutes. Rice hull is the cheapest fiber material we can get in Korea, What is better the yield of rice hull amounts to 1 million tons per year. Before carrying out this study, new ecomaterial rice hull board for housing materials was developed successfully. In order to evaluate whether the rice hull board with or without bioceramic treatment is suitable for housing materials, we studied the environmental effect of the above materials in comparison with the polycarbonate, stainless, or concrete on the adaptation (body weight, water/feed consumption, general signs, urinalysis, autopsy, etc) and the reproduction(litter size, newborn adaptation, etc)of mice. In conclusion, the concrete cage was the worst in the adaptation and so was the stainless steel cage in the reproduction. The rice hull board cage with or without bioceramic treatment was superior or equivalent to other material cages from the standpoints of the adaptation and reproduction.

• 한국유기농업학회지
• /
• 제26권3호
• /
• pp.381-391
• /
• 2018

본 연구는 상자형 포획트랩으로 멧돼지를 성공적으로 포획할 수 있는지 확인하고 유인먹이에 대한 반응과 트랩포획 개체수를 조사하기 위해 수행되었다. 상자형 철골 포획트랩은 길이 4${\times}$폭 1.5${\times}$높이 1.2 m 크기로 제작하여 2017년 1월 17일부터 동년 3월 24일까지 전남 담양군 소재 2개소와 전북 순창군 소재 1개소에서 설치하였다. 유인먹이의 선호도를 확인하고자 옥수수 알곡사료와 발효된 옥수수 알곡사료를 혼합하여 멧돼지 이동통로 주변에 200 m 간격으로 제공하였다. 미리 먹이주기를 통해 먹이반응이 활발한 곳으로 선택하여 트랩설치를 하였고, 트랩설치를 한 후 유입구를 열어둔 상태를 유지하였다. 그 결과 유인먹이 처리별로 선호하는 특성을 확인할 수 없었고 모두 고르게 섭식하였다. 또한 처음 유인먹이를 제공한 후 멧돼지가 먹이를 모두 섭식할 때까지 소요일수를 조사한 결과, 수렵활동이 활발한 담양과 영암지역은 6~12일이 소요되었으나 수렵활동이 없었던 순창지역은 5일이 걸렸다. 또한 먹이유인을 8.7일간 하고 트랩 유입구를 개방한 채로 3일 더 유인작업을 한 결과 약 13.7일이 되어 트랩당 4.3마리의 멧돼지가 포획되었다. 따라서 멧돼지의 포획을 성공적으로 하기 위해서는 트랩주변의 수렵활동 강도가 중요 요인임을 시사한다.