• 제목/요약/키워드: stay plates

검색결과 9건 처리시간 0.027초

A numerical method for buckling analysis of built-up columns with stay plates

  • Djafour, M.;Megnounif, A.;Kerdal, D.;Belarbi, A.
    • Structural Engineering and Mechanics
    • /
    • 제26권4호
    • /
    • pp.441-457
    • /
    • 2007
  • A new numerical model based on the spline finite strip method is presented here for the analysis of buckling of built-up columns with and without end stay plates. The channels are modelled with spline finite strips while the connecting elements are represented by a 3D beam finite element, for which the stiffness matrix is modified in order to ensure complete compatibility with the strips. This numerical model has the advantage to give all possible failure modes of built-up columns for different boundary conditions. The end stay plates are also taken into account in this method. To validate the model a comparative study was carried out. First, a general procedure was chosen and adopted. For each numerical analysis, the lowest buckling loads and modes were calculated. The basic or "pure" buckling modes were identified and their critical loads were compared with solutions obtained using analytical methods and/or other numerical methods. The results showed that the proposed numerical model can be used in practice to study the elastic buckling of built-up columns. This model is considered accurate and efficient for the local buckling of short columns and global buckling for slender columns.

GDQM에 의한 띠판을 갖는 조립 칼럼의 좌굴 해석 (Buckling Analysis of Built up Column with Stay Plates by the Generalized Differential Quadrature Method)

  • 신영재;김재호;정인식
    • 한국소음진동공학회논문집
    • /
    • 제11권9호
    • /
    • pp.462-474
    • /
    • 2001
  • In this paper, Generalized Differential Quadrature Method is applied to the buckling analysis of built-up columns without or with stay plates. numerical analysis using GDQM is carried out for various boundary conditions(simply supported conditions, fixed conditions, fixed-simply supported conditions), dimensionless stiffness parameter and dimensionless inertia moment parameter. The accuracy and convergence of solutions are compared with exact solutions of Gjelsvik to validate the results of GDQM. Results obtained by this method are as follows. 91) This method can yield the accurate numerical solutions using few grid points. (2) The buckling load of built-up column increases as the dimensionless stiffness parameter decreases. (3) The effects of boundary conditions on the buckling load are not considerable as the dimensionless stiffness parameter increases. (4) The buckling load of built-up column increases due to the stay plate.

  • PDF

위험물저장탱코밑판의 부식 성향분석 및 부식예방 방안에 관한 연구 (A Study On the Corrosion Tendency of Bottom Plates and Corrosion Prevention Measures in Hazmat Tanks)

  • 최정수;노경진
    • 한국재난정보학회 논문집
    • /
    • 제4권1호
    • /
    • pp.138-152
    • /
    • 2008
  • The most important factor in the maintenance of chemical industry facilities is related with deterioration and corrosion. Leakage of hazardous materials is likely to occur because the confirmation and maintenance of bottom plates are very difficult while the bottom corrosion of the massive hazmat-storage facilities is most dangerous especially. As a result of the analysis of the corrosion locations, areas, usage condition of 287 hazmat-storage tanks on this syudy, it is concluded that the main external corrosion factors are the inflow of moisture and the materials inducing corrosion in the air such as sodium chloride and the main internal corrosion factors are corrosion react caused by stay of seawater, sulfur and moisture in hazmat for a long time without appropriate discharges. It is anticipated that the corrosion of bottom plates can be restrained effectively by establishing the proper measures for the each corrosion cause.

  • PDF

자려 평형 틸팅 패드 스러스트 베어링의 정렬불량에 따른 베어링 특성에 관한 실험적 연구 (Experimental Study on the Characteristics of Misaligned Self-equalizing Tilting Pad Thrust Bearing)

  • 송애희;조현준;최성필;김선진
    • Tribology and Lubricants
    • /
    • 제36권1호
    • /
    • pp.27-33
    • /
    • 2020
  • Self-equalizing tilting pad thrust bearings are usually employed in turbomachines to achieve high stability and reliability. A tilting pad bearing can incorporate self-equalizing links to handle the misalignment between the bearing and the thrust collar. In this popular design method, the pads sit on the upper-level plates and the lower-level plates stay on the retainer base. With misalignment, the pads that are heavily loaded are pushed down. Consequently, the link pushes up the pads on the opposite side, keeping the bearing surface parallel to the thrust collar surface. The self-equalizing link is used to handle the misalignment from the thermal and mechanical effects. In this study, the experimental investigation deals with the performance of self-equalizing tilting pad thrust bearings. The test rig for evaluating the performance of bearing is developed which can control the misalignment angle. Simultaneous measurements are taken for the force acting on each pad. Pad metal temperature and oil film thickness are functions of the shaft speed, bearing load, misalignment angle, and design of leveling plates. The effect of misalignment on bearing performance is discussed. The results demonstrate that the load on each pad depends on the test conditions(especially misalignment angle), and the load influences the performance of bearings.

이멀션윤활특성에 관한 실험적 연구 (An Experimental study on the Characteristics of the Emulsion Lubrication)

  • 이종순;이봉구;정재련;지창헌
    • Tribology and Lubricants
    • /
    • 제2권2호
    • /
    • pp.12-19
    • /
    • 1986
  • 냉각성, 난연성, 그리고 경제성의 면에서 우수한 윤활특성을 갖고 있는 이멀션윤활제를 사용하여 로울러와 프레이트간의 선접촉 및 광간섭계의 실험장치를 통하여 탄성유체윤활 영역에서의 윤활기구 및 분산립자의 거동기구를 명확히 하여 다음과 같은 결론을 얻었다. 1. 스퀴즈 유막내의 유동은 윤활간극이 비교적 넓은 경우와 좁은 경우로 대별하여 전자의 경우에는, 입자분포 및 속도분포의 영향이 크게 나타나며, 후자의 경우는 이멀션입자가 간극내에 정지하여 유막두께의 감소와 더불어 변형되어 간다. 2. 스퀴즈 유막내의 O/W, W/O 각 이멀션의 유동은 간극이 클 경우, 입경에 의한 속도차가 역으로 나타나고, 작은 경우에는 잔류액적의 분포가 서로 다르며 그밖에 O/W 형은 W/O 형에 비하여 분산입자가 쉽게 변형하는 것을 알 수 있다. 3. EHL영역입구부에서는 입자의 유동속도가 극히 적은 정체영역이 존재하며, 그 부근에서의 입자의 거동은 입경에 따라서 다르다. 4. 2색광에 의한 광간섭선의 관찰에 의하여 탄성유체윤활 영역내를 통과하는 이멀션유를 확인함과 동시에 EHL영역입구부에서의 분열거동이 관찰되었다.

판형 열교환기의 열전달과 유동특성에 대한 연구 (Study on Characteristics of Heat Transfer and Flow in Plate Heat Exchanger)

  • 김진화;이광성;지명국;정한식;정효민
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2009년도 하계학술발표대회 논문집
    • /
    • pp.1476-1483
    • /
    • 2009
  • In present work, experiments conducted to investigate the heat transfer characteristics and relationship between operating parameters and production of fresh water as output of the system. Plate Heat Exchanger (PHE) applied in vacuum evaporator for product fresh water that system intended to efficiently use low grade heat. PHE have become popular in chemical, power, food and refrigeration industries due to the efficient heat transfer performance, extremely compact design and flexibility of extend or modify to suit changed duty. The heat transfer part contains corrugated plates with 60 degree of chevron angle which verified by many researchers and commonly apply. Fresh water can be produced from saline water under near vacuum pressure by operating ejector. Consequently, evaporating temperature stay around $51-57^{\circ}C$ so it is possible to use any low grade heat source or renewable source. The maximum fresh water produced by freshwater generator with plat heat exchanger applied in the study was designed as 1.0 Ton/day.

  • PDF

스키에 의한 전방십자인대 손상에 대한 고찰 (The study of anterior cruciate ligament injury after a ski accident)

  • 박주환;전성화;양난희;김용권;김지혁
    • 대한물리치료과학회지
    • /
    • 제10권1호
    • /
    • pp.222-231
    • /
    • 2003
  • The ACL(Anterior cruciate ligament) is the smallest of the four main ligaments of the knee, but it is the primary stabilizer. Injuries have a tendency to occur when the foot is firmly planted and the knee is twisted. Any sports that requires acceleration, change of direction and deceleration can increase the chances of suffering an ACL tear. The incidence of severe knee sprains that involve the ACL are at an all-time high. Since 1980, the number of these injuries have increased at least three-fold. Although the rate of increase has been much less dramatic since the middle 1980s, even the ultra-modem releasable ski binding has not been able to start reducing the incidence of ACL injuries. An ACL injury prevention program developed for downhill skiers by the Vermont Safety Research group emphasized increasing awareness of situations that can potentially result in an ACL injury and pre-planning strategies if events, leading to these situations, begin to fall in place. As part of the above study by Ettlinger et al., an educational prevent program was developed to teach these principles and thus reduce the rate of serious knee injuries. Four thousand instructors and patrol at 20 ski resorts who received the training had a 62% decline in serious knee injuries compared to a similar group that did not receive this training. Whenever you fall, try not to fully straighten your legs. Don't try to get up until you've stopped sliding(unless you are try to avoid an obstacle or other skier). When you're down, stay down. And don't land on your hand. So, if you feel yourself falling: arms forward, ski plates together, hands over knee. Then you will be able to save your ACL.

  • PDF

Use of resorbable mesh and fibrin glue for restoration in comminuted fracture of anterior maxillary wall

  • Yang, Jae-Hyuk;Chang, Suk Choo;Shin, Jin Yong;Roh, Si-Gyun;Lee, Nae-Ho
    • 대한두개안면성형외과학회지
    • /
    • 제19권3호
    • /
    • pp.175-180
    • /
    • 2018
  • Background: The facial bone has a complex structure compared to other bones, and various types of fractures can occur due to its characteristics. Among them, in comminuted fractures of anterior maxillary wall, multiple depressed and impacted bony segments cannot be reduced easily when performing internal fixation using plates and screws or wires, and inadequate restoration leads to a range of complications. This paper introduces an alternative technique using a resorbable mesh with fibrin glue to restore comminuted fractures of anterior maxillary wall. Methods: Thirteen patients were diagnosed with comminuted fractures of anterior maxillary wall between March 2017 and February 2018 in the authors' hospital. All patients with comminuted fractures of anterior maxillary wall underwent restoration using resorbable mesh with fibrin glue. The patients' demographics, causes of facial trauma, mean operation time, length of hospital stay, follow-up period, and complications were recorded. Results: No major complications and only one hypoesthesia of the skin area was noted. Three months after surgery, the hypoesthesia recovered completely. After surgery (mean, 3.9 months; range, 2-12 months), computed tomography showed that the bone fragments in all patients were fixed successfully in their anatomical places. Conclusion: In comminuted fractures of anterior maxillary wall, the use of a resorbable mesh with fibrin glue can be an advantageous and effective method for a successful restoration without complications.

중증 위장관염 소아의 대변검체에서 역전사-중합효소 연쇄반응을 이용한 Astrovirus 검출 (Detection of Astrovirus Infection from Hospitalized Young Children Feces by Reverse Transcription-Polymerase Chain Reaction)

  • 박혜경;우소연;서주영;정영해;서정완
    • 대한미생물학회지
    • /
    • 제34권5호
    • /
    • pp.453-459
    • /
    • 1999
  • Astrovirus is frequently associated with diarrhea in children. It can not be readily isolated by cell culture, and an electronmicroscope is usually used for detection of this agent. Recently in 1995 a combined method of reverse transcription-polymerase chain reaction (RT-PCR) was designed for easier detection of astrovirus, which is based on the conserved sequence in 3'-end of genomes of the 7 known serotypes of human astrovirus. As of yet there has not been any report of astrovirus data in Korea using the RT-PCR methods. The purpose of this study was to detect astrovirus incidence, severity of symptoms, seasonal variation and co infection rate with rotavirus in Korean children inpatients with diarrhea. Fecal specimens from 61 young children hospitalized with gasteroenteritis Korea from Jan. 1996 through Mar. 1997. They were examined for astroviurs infection by RT-PCR method. Results are as follows:1. Astrovirus was detected at 9.8% (6/61) from fecal specimens of children with severe diarrhea by EIA using monoclonal antibody coated plates. 2. Astorvirus was detected at 29.5% (18/61) from fecal specimens of children with severe diarrhea by RT-PCR. 3. The age of the 18 children affected by astrovirus ranged from 2 monthes to 7 years with mean of 3.0 years. 4. Mean hospital stay of the 18 children was 6.1 days. 5. Five (27.8%) astrovirus RT-PCR positive strains were confirmed in November and in December, respectively out of 18 specimens in total. 6. Astrovirus coinfection with rotavirus type G1 was confirmed in 15/16 specimens (93.8%), and with type G2 was in 1/16 specimens (6.3%).

  • PDF