• ETRI Journal
• /
• v.31 no.1
• /
• pp.86-88
• /
• 2009

In this letter, we consider an m-node tandem queue (queues in series) with a Poisson arrival process and either deterministic or non-overlapping service times. With the assumption that each node has a finite buffer except for the first node, we show the non-increasing convex property of stationary waiting time with respect to the finite buffer capacities. We apply it to an optimization problem which determines the smallest buffer capacities subject to probabilistic constraints on stationary waiting times.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.307-310
• /
• 2002

A two-dimensional numerical method for inviscid two-fluid flows with evolution of density interface is developed, and an initially stationary two-dimensional fluid sheet surrounded by another fluid is studied. The Interface between two fluids is modeled as a vertex sheet, and the flow field u÷th the evolution of interface is solved by using vortex-in-cell/front-tracking method. The edge of the sheet Is pulled back into the sheet due to surface tension and a blob is formed at the edge. This blob and fluid sheet are connected by a thin neck. In the inviscid limit, such process of the blob and neck formation is examined in detail and their kinematic characteristics are summarized with dimensionless parameters. The edge recedes at $V=1.06({\sigma}/{\rho}h)^{0.5}$ and the capillary wave Propagating into the fluid sheet must be considered for bettor understanding of the edge receding.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.2E
• /
• pp.3-7
• /
• 2000

Vibration generated by the non-uniform road profile propagates though each tire and the suspension and finally generates structure born noise in the interior of the passenger vehicle. In this paper, the road-booming-noise which has strong correlation with the vibration signals measured at the suspension system was compensated. Active noise control of the road-booming-noise is rather difficult to achieve because of its non-stationary characteristics. CMFX LMS (Constraint Multiple Filtered-X Least Mean Square) algorithm, which can track non-stationary process rather well, is applied. Comprison of the proposed method and the conventional MFX LMS (Multiple Filtered-X Least Mean Square) algorithm is made through the hardware-in-the-loop simulation and the feasibility of the proposed method is demonstrated with the experiment.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2002.09a
• /
• pp.181-188
• /
• 2002

It is well known that double integration of measured acceleration records are very difficult, particularly in the case of measurements on civil engineering structures. The measured accelerations on civil structures usually contain non-gaussian and low-frequency noises as well as acceleration records are non-stationary. For this type of signals, wavelet transform can be useful because of its inherent processing abilities for non-stationary signals. In this paper, the do-noising algorithm using the wavelet transform are slightly extended to process non-gaussian and low frequency noises, using median filter concepts. The example studies show that the integration can be improved using proposed method.

• Journal of the Korean Mathematical Society
• /
• v.43 no.1
• /
• pp.45-63
• /
• 2006

This paper is concerned with a boundary control problem for the vorticity minimization, in which the flow is governed by the stationary two dimensional Stokes equations. We wish to find a mathematical formulation and a relevant process for an appropriate control along the part of the boundary to minimize the vorticity due to the flow. After showing the existence and uniqueness of an optimal solution, we derive the optimality conditions. The differentiability of the state solution in regard to the control parameter shall be conjunct with the necessary conditions for the optimal solution. For the minimizer, an algorithm based on the conjugate gradient method shall be proposed.

• Journal of Electrical Engineering and Technology
• /
• v.5 no.3
• /
• pp.497-502
• /
• 2010

In this paper, the O-mode ultrashort-pulse reflectometry (USPR) millimeter-wave signals that propagate into the plasma and cover a frequency bandwidth of 33-158 GHz are examined numerically using MATLAB. Two important processes are involved in the computation: the propagation of the USPR impulse signal through a waveguide and the frequency up-conversion using millimeter-wave mixers. These mixers are limited to intermediate frequency signals that are less than 500 mV; thus, it is necessary to disperse the impulse signal into a chirped waveform using the waveguide. The stationary phase method is utilized to derive a closed-form formula for a chirped waveform under the assumption that the USPR impulse is Gaussian. In the process of frequency up-conversion, the chirped waveform is mixed with the mixer LO signal, and the lower frequency components of the RF signal are removed using high pass filters.

• Journal of The Korean Astronomical Society
• /
• v.23 no.1
• /
• pp.63-70
• /
• 1990

The original axisymmetric, stationary electrodynamic model of the central engine in an active galactic nucleus proposed by Macdonald and Thorne consists of a supermassive black hole with magnetic field lines that pass through the region just outside the event horizon of the black hole. Each magnetic field line rotates with a constant angular velocity which will exceed the speed of light at large radii. Even though the field lines are purely mathematical entities this condition sets a stringent physical constraint on the motion of the magnetic field lines and the particles on them. In this paper we will show that we can remove this auxiliary constraint in our model by allowing nonstationary processes. As a result the magnetic field lines can be twisted and wound up in a region lying outside of the quasi-stationary magnetosphere of the black hole. We conclude that astrophysical jets are formed in that region due to the twisted and wound magnetic field lines powered by the Blandford-Znajek process and the other driving forces.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.14 no.1
• /
• pp.39-48
• /
• 2008

Well-dying is as important as Well-Being because dying is also a natural part of life. Recently, due to the change of lifestyles, cancer, AIDS and other chronic diseases cause drastic increase of mortality rate. Needs for hospice services are growing as many terminal patients interested in quality of life during their end of life period. They want calm and dignity in case process as well as pain-relieving. However, there is not many researches on the architectural planning of hospice facilities and their service system as well as government regulations. This study focuses on the German hospice facilities which have developed advanced models through researches on service contents and architectural planning. The purpose of this study is to provide fundamental data for designing hospice facilities through analyzing 7 cases of German hospice facilities with different characteristics.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2082-2087
• /
• 2008

The heat transfer process from steam to web through the cylinder drum consists of the thermal resistance by condensate thickness. thickness of shell, and the contact resistance between cylinder and web. The most thermal resistance in conventional cylinder drum dryer is generated by condensate, which is increased by the increase on revolution per minute(RPM). Therefore, the increase of RPM for the production enhancement results in the more thermal resistance, and eventually RPM is restricted. In this study, the theoretical analysis on the characteristics of heat transfer in cylinder drum for paper dryer was performed in the stationary state of steam in drum. The overall heat transfer coefficient, steam quantity and heat transfer quantity were predicted by diameter and length of drum, condensate thickness, revolution per minute and steam temperature for experimental apparatus design.

• Proceedings of the Korea Contents Association Conference
• /
• 2018.05a
• /
• pp.53-54
• /
• 2018

This paper introduces an approach to detect motion areas of stationary objects when the camera slightly moves in the scene by computing optical flow. The flow field is computed by two pyramidal architectures of 5 levels which are built by down-sampling the size of the images by half at each level. Two pyramids of images are built and then optical flow is computed at each level. A warping process combines the information and generates a final flow field after applying edge smoothness and outliers reduction steps. Moreover, we convert the flow vectors in order of magnitude and angle to a color map using a pseudo-color palette. Experimental results in the Middlebury optical flow dataset demonstrate the effectiveness of our method compared to other approaches.