• 한국소음진동공학회논문집
• /
• 제23권11호
• /
• pp.966-972
• /
• 2013

Measurement or estimation of tilt angle is necessary for balancing robot such as Segway which is considered as a next generation transportation vehicle. However, it requires high-cost accurate sensors to hold balancing during stationary and moving situations. In this paper, a tilt angle estimation of a plane rotating in a vertical plane using low-cost sensors. Estimation using a set of 2-axis orthogonal accelerometers along with an inaccurate rate gyro has been considered. Feasibility and performance of the proposed technique has been verified through some experimental results.

• Wind and Structures
• /
• 제27권6호
• /
• pp.399-416
• /
• 2018

In order to reveal the independent relationship between track irregularity and wind loads, the stochastic characteristics of train-bridge coupling systems subjected to wind loads were investigated by the multi-sample calculation. The vehicle was selected as 23 degrees of freedom dynamical model, and the bridge was described by three-dimensional finite element model. It was assumed that the wind loads were random processes with strong spatial correlation, while the track irregularities were stationary random ones. As a case study, a high-speed train running on a cable-stayed bridge subjected to wind loads was studied. The effect of rail irregularities was deemed to be independent of the effect of wind excitations on the coupling system in the same wind circumstance for the same project, leading to the conclusion that the effect of wind loads and moving vehicle could be calculated separately. The variance results of the stochastic responses of vehicle-bridge coupling system under the action of wind loads and rail irregularities together were equivalent to the sum of the variance of the responses induced by each excitation. Therefore, when one of the input excitations is different, only the effect of changed loads needs to be assessed. Moreover, the new calculated results were combined with the effect of unchanged loads to present the stochastic response of coupling system subjected to the different excitations, reducing the cost of computations. The stochastic characteristics, the CFD (cumulative distribution function) of the coupling system with different wind velocities, vehicle speed, and vehicle marshalling were studied likewise.

• 한국정밀공학회지
• /
• 제27권10호
• /
• pp.52-60
• /
• 2010

It is generally important to get a precise position information for autonomous unmanned vehicle(AUV) to run safely. For getting the position of AUV, the GPS has been using to navigation in a vehicle. Though it is useful to finding a position, it is difficult to precisely control a trajectory of the AUV due to large measuring error which may reach over 10 meters. Therefore to apply AUV it needs to compensate for the error. This paper proposes a method to more precisely localize AUV using three low-cost differential global positioning systems (DGPS). The distance errors between each DGPS are minimized as using the least square method (LSM) and the Kalman filter to eliminate a Gaussian white noise. The selected DGPS is cheaper and easier to set up than the RTK-GPS. It is also more precise than the general GPS. The proposed method can compensate the relatively position error according to stationary and moving distance of the AUV. For evaluating the algorithm by simulation, the DGPS signal with the Gaussian white noise to any points is generated by the AR model and compared with the measurement signal. It is confirmed that the proposed method can effectively compensate the position error as comparing with the measurement signal. The compensated position signal can be used to localize and control the AUV in the road.

• Tribology and Lubricants
• /
• 제25권6호
• /
• pp.421-426
• /
• 2009

The brake system is important part of automobile safety system. The disc brake system is divided two parts: the rotating axisymmetrical disc and the stationary pads. During braking, the kinetic energy and potential energy of moving vehicle were converted into the thermal energy through frictional heat between the brake disc and the pads. The frictional heat, which is generated on the interface of the disc and pads, can cause high temperature during the braking process. The object of present work is to determine temperature and thermal stress, to compare to simulation results and experimental results in the disc by partial 3D model of ventilated disc brake with appropriate boundary conditions. In the simulation process, the mechanical loads were applied to the thermo-mechanical coupling analysis in order to simulate the process of heat produced by friction.

• Journal of Positioning, Navigation, and Timing
• /
• 제7권4호
• /
• pp.235-243
• /
• 2018

Conventional Real Time Kinematics (RTK) collect measurements in stationary state for several minutes to resolve the integer ambiguity in the carrier phase measurement or resolve the integer ambiguity on the move assuming low maneuvering movement. In this paper, an On The Move-RTK (OTM-RTK) technique that resolves the integer ambiguity on the move for fast and precise positioning of ground vehicles such as high maneuvering vehicles was proposed. The OTM-RTK estimates the precise amount of movement between epochs using the carrier phase measurements acquired on the move, and by using this, resolves the integer ambiguity within a short period of time by evaluating the integer ambiguity candidates for each epoch. This study analyzed the integer ambiguity resolution performance using field driving experiment data in order to verify the performance of the proposed method. The results of the experiment showed that the precise trajectory including the initial position bias can be obtained prior to resolving the integer ambiguity, and after resolving the integer ambiguity on the move, it was possible to obtain the bias-corrected precise position solution. It was confirmed that the integer ambiguity can be resolved by collecting measurements of about 10 epochs from the moving vehicle using a dual frequency receiver.

• 드라이브 ㆍ 컨트롤
• /
• 제17권3호
• /
• pp.9-14
• /
• 2020

A special purpose machine with two manipulators and quadruped crawler system is being developed to work at disaster sites where it is intended to quickly respond in the initial stages after the event. In this study, a terrain recognition module is developed so that the above special purpose machine can quickly obtain ground information to help choose its path while recognizing objects in its way, this is intended to enhance the remote driver's limited situational awareness. Terrain recognition modules were developed for two tasks (real-time path guidance, precision terrain measurements). The real-time path guidance analyzes terrain and obstacles while moving, while the precision terrain measurement feature provides more accurate terrain information by precisely measuring the ground in front of the vehicle while stationary. In this study, an air-cooled sensor protection module was developed so that the terrain recognition module can continue its vital tasks in the event of exposure to foreign substances, including scattered dust, mist and rainfall, as well as high temperatures.

• 대한기계학회논문집A
• /
• 제39권6호
• /
• pp.549-559
• /
• 2015

본 논문에서는 동적 움직임을 갖는 장애물이 위치한 주행환경에서 이동로봇의 충돌회피 기능을 포함하는 효율적인 반응경로계획 기법을 제안하고자 한다. 로봇의 동적 장애물과의 충돌회피 기능을 위해서 반응경로계획기법을 기반으로 키넥트센서를 이용한 센서융합기법의 보완을 통해서 자율주행의 강건성을 증대시키고자 하였다. 반응경로기법에서 사용된 접근방식은 동적장애물을 가상좌표평면에서 지역관측기개념을 이용하여 정적장애물로 좌표변환을 가능하게하며, 생성된 가상평면에서의 로봇과 장애물의 충돌 발생 가능한 속도와 경로의 운동학적 정보추출이 가능하게 된다. 또한 키넥트 센서 정보를 융합하여 장애물의 방향과 위치 정보를 추정하여 동적 환경에서의 주행성능의 정미도를 증대시키고자 하였다. 본 연구에서 제안 기술의 성능을 검증하기 위해서 임베디드 로봇플랫폼과 여러 개의 동적 장애물을 이용하여 시뮬레이션 해석 및 실험을 수행하였다.

• 대한원격탐사학회지
• /
• 제32권3호
• /
• pp.307-321
• /
• 2016

대기경계층고도 (Planetary Boundary Layer Height, PBLH)는 기상예측모델과 대기확산모델에 중요한 예측 인자이다. PBLH는 지역의 특성에 따라 시공간 빠르게 변화하기 때문에 이를 분석하기 위하여 시공간 고해상도로 관측된 자료가 필요하다. 본 연구에서 국립기상과학원 재해기상연구센터에서 운영중인 차량에 탑재된 라이다 시스템(Lidar observation Vehicle, LIVE)을 소개하고 이것으로 관측된 PBLH의 분석결과를 제시하였다. 분석기간 (2014년 6월 26일~30일) LIVE에서 산출된 PBLH는 WRF와 라디오존데에서 산출된 값과 비교하여 결정계수가 각각 0.68, 0.72로 높은 상관도를 나타내었다. 하지만, 라이다로 산출된 PBLH는 WRF, 라디오존데와 비교하여 값을 과대모의 하는 경향을 보였다. 이는 라이다가 중첩고도 이하 (< 300m)에서 나타나는 PBLH를 찾아내지 못하고 중첩고도 이상에서 나타나는 잔류층 (Residual Layer, RL)을 PBLH로 산출한 결과라 생각된다. 라이다를 활용하여 10분 시간 해상도로 산출된 PBLH는 일출 뒤 성장하다 태양의 남중이 최고가 되는 시점의 2시간 이후 서서히 감소하는 전형적인 일변화 경향을 보여주었다. 분석기간 평균 PBLH의 성장률은 1.79 (-2.9 ~ 5.7) m $min^{-1}$ 였다. 또한, 이동 중 관측된 라이다 신호를 고정관측 기반자료와 비교한 결과 잡음이 적은 것으로 나타났다. 이동 중 관측된 PBLH의 평균은 1065 m 였으며 인근 속초에서 비양된 라디오존데 (1150 m)와 유사한 값을 보였다. 본 연구에서 LIVE가 고해상도의 시공간 자료를 안정적으로 산출 할 수 있음을 제시하였다. 이 같은 LIVE의 장점은 에어로졸 및 대기구조에 대한 새로운 관측 패러다임 제시와 관측기술선진화에 기여도가 클 것으로 기대된다.