• Journal of The Korean Society of Integrative Medicine
• /
• v.3 no.3
• /
• pp.59-71
• /
• 2015

Purpose : This study examines the effect of vibration exercise grafting PNF patterns for 6 weeks on upper body stability and equilibrium for seniors having fifteen or over of MMSE-K. Method : A total of 10 senior citizens participated in this study. Each participant performed PNF patterned exercises using vibration sports equipment for 30 minutes, once static a week, for six weeks. We measured trunk stability and balance degree before and after the six-week exercise program. Motor Assessment Scale (MAS) was used to measure trunk stability, while Functional Reach Test (FRT) and Timed Up and Go (TUG) was used to measure balance degree. The collected data was processed using paired t-test to confirm the difference between pre-program conditions and post-program conditions. Results: The results of our study show that post-program trunk stability measurements increased when compared to pre-program data; however, this increase was not statistically significant. pre and post-measurements for satatic balance and dynamic balance were statistically unchanged. Conclusion: Due to limitations in the number of participants, the procedural design of this experiment, and the limited amount of time participants actually controlled, this study failed to produce statistically significant results. However, further study should be conducted using a systematically implemented exercise program to show support for exercising with flexi-bar as an effective program for the elderly.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.6
• /
• pp.134-142
• /
• 2012

This paper presents a study of system identification on the tilt response of the L-type retaining wall located at Tanhyun 11th ACE Apartment, Ilsan in order to understand mechanism how the structure behaves in operational conditions and to provide a reference tilt values for assessing structural abnormality. The retaining wall was extraordinarily tall (14m) in urban area so the long-term monitoring system had been installed with 3 tilts-meters and 9 temperature sensors operational from Oct 2004 upto Nov 2007. By using 5-months continuous data in which all the 12 channels were up and running, the two prediction models, 1) the linear model, and 2) the state-space equation (SSE) model, have been identified by finding the best fitness model among all possible 511 combinations of input temperatures out of the 9 temperatures. The linear model which was simple in the model structure achieved the validation fittness of 68% due to the fact that the static model wasn't able to represent thermal dynamics. The SSE model achieved the validation fitness of 90% which was quite accurate considering various unexpected noises happening in field measurements.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.6 s.52
• /
• pp.103-114
• /
• 2006

Forced vibration testing is important for correlating the mathematical model of a structure with the real one and for evaluating the performance of the real structure. There exist various techniques available for evaluating the seismic performance using dynamic and static measurements. In this paper, full scale forced vibration tests simulating earthquake response are implemented by using a hybrid mass damper. The finite element (FE) model of the structure was analytically constructed using ANSYS and the model was updated using the results experimentally measured by the forced vibration test. Pseudo-earthquake excitation tests showed that HMD induced floor responses coincided with the earthquake induced ones which were numerically calculated based on the updated FE model.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.1
• /
• pp.155-164
• /
• 2015

In this paper, two rotor configurations including different amount of magnet and reluctance parts are presented. The rotors are constituted by means of a flexible hybrid motor structure. Considerable features of the hybrid structure are that the combination of the magnet and reluctance parts can be suitably modified and the mechanical angle (${\beta}$) between the parts can also be varied. Two hybrid rotor configurations have been considered in this study. First, finite element (FE) simulations were carried out and the torque behaviors of the motors were predicted. The average torque ($T_{avg}$) and maximum torque ($T_{max}$) curves were obtained from FE simulations in order to find suitable ${\beta}$. Mathematical model of the motors was formed in terms of a,b,c variables considering the amount of the magnet and reluctance parts on the rotor and simulations were performed. Rotor prototypes, motor drive and drive method were introduced. Torque profiles of the motors were obtained by static torque measurement and loaded tests were also realized. Thus, simulation results were verified by experimental study. There is a good match between predictions and measurements. The proposed motors are operated with electrical $120^{\circ}$ mode as a brushless DC motor (BLDC) and torque versus speed characteristics show a compound DC motor characteristic. The motors can be named as brushless DC compound motors.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2601-2610
• /
• 2013

The main limiting factors of Precise Point Positioning(PPP) accuracy are errors in broadcast satellite orbits, clock errors, and the others, which are receiver-dependent errors(ionospheric, tropospheric refraction, multipath, and tides, etc.). Therefore, to facilitate high precision PPP, precise orbits/clocks corrections, the receiver-dependent errors corrections have to apply to multi frequency GNSS measurements for an ionosphere free combination and integer ambiguity resolution in real-time. Currently, there are many Analysis Centers, which offer the precise corrections stream computed in real-time using the global or regional GNSS tracking network. The goles of this research considered performances of the real-time static PPP with using RTCM corrections from NTRIP casters. For this, the corrections streams of Analysis Centers received via NTRIP does apply to GNSS data of check points individually, as well as jointly, in accordance with various session lengths. After that, have compared the PPP results from the corrections streams with each other, and with Standard Point Positioning(SPP) results.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.10
• /
• pp.1025-1031
• /
• 2007

GPS is widely used for positioning applications and attitude of a vehicle can be found also with multiple antennas. However, extremely weak signal level prevents GPS from indoor operation. DR with accelerometers and gyros and landmark based localization method used for indoor applications increase complexity and cost. In this paper, a simple but very efficient ultrasound based attitude determination system which determines both position and attitude in WSN is given. The range between transmitter and receivers are measured using the arrival time difference between ultrasound and RF signal. The 3 dimensional positions can be found using more than 3 range measurements. Furthermore, if more than 2 transmitters are used, the attitude can be determined using the baseline vectors obtained by differencing transmitter and receiver positions. The prototype system is implemented to evaluate the performance of the proposed method. In addition, an error analysis shows the relation between the attitude error and basel me length, quality of measurement and orientation of a vehicle. The static and dynamic experiments performed by micro mobile robot shows accurate position with less than 1.5cm error and attitude with less than 1 degree error can be obtained continuously with 20cm baseline. It is expected that these results can be adapted without modification to indoor applications such as home cleaning robot and autonomous wheelchair maneuvering.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.4
• /
• pp.305-323
• /
• 2017

Objective: The purpose of this study was to determine breast shape and ratio of breast enlargement women prior to development of breast enlargement patient's bra. Background: Although there are many previous studies on women's breast that did not undergo breast augmentation surgery, no studies have examined the breast type and proportion of women with breast augmentation. Method: In this study, we analyzed ratios and angles with photographs taken before and after breast augmentation on the frontal and lateral views of the breast, UPF and projection were analyzed too. We also compared the pre-operative and post-operative rates with those of previous breast studies, as well as the post-operative breast types for the desirable breast types. Results: The length and width of the breast base and the height of the breast projection increased after the operation. The rate of increase in width is larger than the vertical distance in the breast base, and the rate of increase in height of the projection is larger than the increase in the width. Specifically, in the vertical distance, the rate of increase in the lower portion is larger than that in the upper portion. In the width, the rate of increase on the inside is larger than that on the outside. Conclusion: The angles of the static relationship with the projection increased and the angles of the minor relation decreased. The changes in the size of the breast were visually observed in the overlapping of the triangle shape before and after the surgery. The changes were composed of the line connecting the angle and the measurement points. The pre-operative upper pole fullness (UPF) was mostly 0 and - 1, but after the surgery, +1, 0, -1, +2 were distributed, while post-operative levels of projection were distributed in the order of level 3> level 1> level 2. In comparison with the desirable breast type, it was found that the anatomical type was a more natural breast type than the round type of implant. Application: These results can be useful as basic data for the breast analysis of breast enlargement patients and their bra patterns.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.6
• /
• pp.3046-3070
• /
• 2017

Nowadays, the utilization of multiprocessor environments has been increased due to the increase in time complexity of application programs and decrease in hardware costs. In such architectures during the compilation step, each program is decomposed into the smaller and maybe dependent segments so-called tasks. Precedence constraints, required execution times of the tasks, and communication costs among them are modeled using a directed acyclic graph (DAG) named task-graph. All the tasks in the task-graph must be assigned to a predefined number of processors in such a way that the precedence constraints are preserved, and the program's completion time is minimized, and this is an NP-hard problem from the time-complexity point of view. The results obtained by different approaches are dominated by two major factors; first, which order of tasks should be selected (sequence subproblem), and second, how the selected sequence should be assigned to the processors (assigning subproblem). In this paper, a hybrid proposed approach has been presented, in which two different artificial ant colonies cooperate to solve the multiprocessor task-scheduling problem; one colony to tackle the sequence subproblem, and another to cope with assigning subproblem. The utilization of background knowledge about the problem (different priority measurements of the tasks) has made the proposed approach very robust and efficient. 125 different task-graphs with various shape parameters such as size, communication-to-computation ratio and parallelism have been utilized for a comprehensive evaluation of the proposed approach, and the results show its superiority versus the other conventional methods from the performance point of view.

• The Journal of Korean Physical Therapy
• /
• v.30 no.4
• /
• pp.141-145
• /
• 2018

Purpose: Changes in the curvature of the vertebral columns of elderly women with increasing age causes various side effects and disorders. Therefore, this study was conducted to evaluate the effectiveness of the 8-figure scapular brace to improve pulmonary function and balance ability based on lung capacity and foot pressure by increasing the vertebral curvature. Methods: Seventeen elderly women with a forward head posture were selected. Women were asked to wear the 8-figure scapular brace and the forced expiratory volume in 1 second (FEV1) and forced vital capacity (FVC) were measured, as were changes in foot pressure. Measurements were conducted three times each and the mean values were used for subsequent analyses. For static evaluation, we used the paired t-test to identify differences between pre and post values. Results: There was no significant difference in FEV1 and FVC before and after use of the brace (p>0.05); however, there was a significant decrease in forefoot pressure and an increase in rearfoot pressure following application of the brace (p<0.05). Conclusion: Application of the 8-figure scapular brace to correct vertebral curvature in elderly women influenced pressure distribution change from immediate effect body arrange of cervical and thoracic. However, wearing the 8-figure scapular brace may interfere with expansion of the chest and therefore respiratory muscle activity. Accordingly, it is necessary to apply appropriate treatment when wearing a scapular brace and to allow a sufficient intervention period while also providing therapeutic interventions such as posture correction or respiration training.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.19 no.2
• /
• pp.101-115
• /
• 2017

This study classified social stratum variables of adults in their 20s to 50s by subjective and objective measurements and classified leisure activities into groups to examine the conspicuous consumption of leisure apparel. A total of 365 adults in their 20s to 50s living in Daegu and the Kyungbuk area were selected considering their jobs and residences. SPSS PC+ 20.0 was used to analyze the data with frequency analysis, factor analysis, reliability examination, cluster analysis, ANOVA, Duncan-test, Scheffe-test, and ${\chi}^2-test$. The results of this study are shown as follows. First, 'Jogging/Walking' was found to be the most favorable activity in the examination of leisure sports activities among the participants and showed a difference in gender. Second, leisure activities were pastime-culture activity, sports activities, static activity, volunteering, and relaxing, and these activities were grouped into non-participant, active and passive leisure activities. Conspicuous consumption of leisure apparel was classified into personality oriented, luxury goods-oriented, and other people-oriented. Third, there was a significant difference in the sub-factors of the conspicuous consumption of leisure apparel (personality oriented, luxury goods-oriented, other people-oriented) according to the sub-factors of subjective stratum(economic power, social position, level of consumption, cultural level and overall stratum consciousness). Fourth, there was significance in the objective social stratum variable by the types of leisure activities. Significant differences were found in personality orientation, luxury goods-oriented, and other people-oriented in conspicuous consumption of leisure apparel by the types of leisure activities. Finally, there were significant differences in economic power, level of consumption, cultural level of subjective social stratum by gender, sports activities and volunteering in leisure activities, as well as other people-oriented conspicuous consumption of leisure apparel. This study also found significant differences in economic power, level of consumption and cultural level of social stratum by age, as well as other people-oriented conspicuous consumption of leisure apparel.