• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1449-1454
• /
• 2003

For many industrial processes there are good static models used for process design and steady state operation. By using system identification techniques, it is possible to obtain black-box models with reasonable complexity that describe the system well in specific operating conditions [1]. But black-box models using inductive modeling(IM) is not suitable for model based control because they are only valid for specific operating conditions. Thus we need to use deductive modeling(DM) for a wide operating range. Furthermore, deductive modeling is several merits: First, the model is possible to be modularized. Second, we can increase and decrease the model complexity. Finally, we are able to use model for plant design. Power plant must be able to operate well at dramatic load change and consider safety and efficiency. This paper proposes a simplified nonlinear model of an industrial boiler, one of component parts of a power plant, by DM method and applies optimal control to the model.

• 한국기계가공학회지
• /
• 제1권1호
• /
• pp.123-132
• /
• 2002

In this study, the static and dynamic characteristics of endmilling process was modelled and the analytic realization of chatter mechanism was discussed. In this regard, We have discussed on the comparative assessment of recursive time series modeling algorithms that can represent the machining process and detect the abnormal machining behaviors in precision endmilling operation. In this study, simulation and experimental work were performed to show the malfunctional behaviors. For this purpose, new recursive least square method (RLSM) were adopted for the on-line system identification and monitoring of a machining process, we can apply these new algorithms in real process for detection of abnormal chatter. Also, The stability lobe of chatter was analysed by varying parameter of cutting dynamices in regenerative chatter mechanics.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.807-811
• /
• 2002

As the requirements on precision and speed of motion in chip mounter increase, vibration forces are always exerted on operating conditions. To insure safety of the chip mounter, the vibration must be kept within an acceptable limit. The focus of this paper is on the identification of dynamic load characteristics and the estimation of static and dynamic stiffness characteristics for Frame Base by judicious selection of the number and the location of the support points. This study carried an analytical and experimental method to estimate the dynamic characteristics in structure.

• 제어로봇시스템학회논문지
• /
• 제5권2호
• /
• pp.189-199
• /
• 1999

This paper presents an optimization algorithm for a stable Self Dynamic Neural Network(SDNN) using genetic algorithm. Optimized SDNN is applied to a problem of controlling nonlinear dynamical systems. SDNN is dynamic mapping and is better suited for dynamical systems than static forward neural network. The real-time implementation is very important, and thus the neuro controller also needs to be designed such that it converges with a relatively small number of training cycles. SDW has considerably fewer weights than DNN. Since there is no interlink among the hidden layer. The object of proposed algorithm is that the number of self dynamic neuron node and the gradient of activation functions are simultaneously optimized by genetic algorithms. To guarantee convergence, an analytic method based on the Lyapunov function is used to find a stable learning for the SDNN. The ability and effectiveness of identifying and controlling a nonlinear dynamic system using the proposed optimized SDNN considering stability is demonstrated by case studies.

• 한국공작기계학회논문집
• /
• 제10권4호
• /
• pp.76-83
• /
• 2001

In this study, the static and dynamic characteristics of turning process was modelled and the analytic realization of regen-erative chatter mechanism was discussed. In this regard, we have discussed on the comparative assessment of recursive times series modeling algorithms that can represent the machining process and detect the abnormal machining behaviors in precision turning operation. In this study, simulation and experimental work were performed to show the malfunction behaviors. For this purpose, new Recursive Extended Instrument Variable Method(REIVM) was adopted for the on-line system identification and monitoring of a machining process. Also, we can apply REIVE algorithms in real process for the detection of chatter frequency and dynamic property and analyze the stability lobe of the system by changing a parameter of cutting dynamics in regenerative chatter mechanics, if it is stable or unstable, Also, The stability lobe of chatter was analysed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.49-52
• /
• 1999

A subspace-based identification method of the Wiener model, consisting of a state-space linear block and a polynomial static nonlinearity at the output, is used to retrieve from discrete sample data the accurate information about the nonlinear dynamics. Wiener model may be incorporated into model predictive control (MPC) schemes in a unique way which effectively removes the nonlinearity from the control problem, preserving many of the favorable properties of linear MPC. The control performance is evaluated with simulation studies where the original first-principles model for a continuous MMA polymerization reactor is used as the true process while the identified Wiener model is used for the control purpose. On the basis of the simulation results, it is demonstrated that, despite the existence of unmeasured disturbance, the controller performed quite satisfactorily for the control of polymer qualities with constraints.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.371-376
• /
• 1999

Stick-slip friction is present to some degree in almost all actuators and mechanisms and is often responsible for performance limitations. Simulation of stick-slip friction is difficult because of strongly nonlinear behavior in the vicinity of zero velocity. A straightforward method for representing and simulating friction effects is presented. True zero velocity sticking is represented without equation reformulation or the introduction of numerical stiffness problems. Stick-slip motion is investigated experimentally, and the fundamental characteristics of the stick-slip motion are clarified. Based on these experimental results, the characteristics of static in the period of stick and kinetic friction in the period of slip are studied concretely so as to clarify the stick-slip process.

• Structural Engineering and Mechanics
• /
• 제31권5호
• /
• pp.507-526
• /
• 2009

Based on numerical and experimental methods, a systematic structural evaluation of a steel natatorium in service was carried out in detail in this paper. Planning of inspection tasks was proposed firstly according to some national codes in China in order to obtain the economic and reliable results. The field visual inspections and static computation were conducted in turn under in-service environmental conditions. Further a three-dimensional finite element model was developed according to its factual geometry properties obtained from the field inspection. An analytical modal analysis was performed to provide the analytical modal properties. The field vibration tests on the natatorium were conducted and then two different system identification methods were used to obtain the dynamic characteristics of the natatorium. A good correlation was achieved in results obtained from the two system identification methods and the finite element method (FEM). The numerical and experimental results demonstrated that the main structure of the natatorium in its present status is safe and it still satisfies the demand of the national codes in China. But the roof system such as purlines and skeletons must be removed and rebuilt completely. Moreover the system identification results showed that field vibration test is sufficient to identify the reliable dynamic properties of the natatorium. The constructive suggestion on structural evaluation of the natatorium is that periodic assessment work must be maintained to ensure the natatorium's safety in the future.

• 한국구조물진단유지관리공학회 논문집
• /
• 제18권2호
• /
• pp.64-73
• /
• 2014

본 연구에서는 철골 골조 구조물의 안전성 모니터링을 위하여 계측한 변형률을 통해 구조물에 작용한 하중을 식별하는 알고리즘을 제안한다. 기존의 시스템 식별 연구에서 구조물의 강성 등을 변수화한 것과는 다르게, 본 연구에서는 구조물에 작용한 하중과 이로 인해 구조물에 발생하는 변형률 간의 관계를 행렬로 정의하고, 이 행렬 및 작용한 하중을 변수화 한다. 계측한 변형률과 변수를 통해 추정한 변형률 사이의 차이를 오차함수로 설정하고 이를 최소화시키기 위해 최적화 알고리즘 중 하나인 유전자 알고리즘을 적용한다. 구해진 변수와 계측 변형률을 통해 작용한 하중을 식별하고 구조물의 하중 변화 시 미계측 지점의 응답을 추정한다. 본 연구에서 제안하는 하중 식별 알고리즘을 검증하기 위해 3차원 철골 골조 구조물의 정적 가력 실험을 수행하였고, 계측한 변형률을 통해 가해진 하중을 낮은 오차 수준으로 식별할 수 있었다. 또한, 하중 조건 변화 시, 계측한 변형률을 통해 모니터링 대상이 되는 미계측 지점의 변형률을 0.17~3.13%의 오차 범위로 추정하였다. 본 연구가 제안하는 식별법이 철골 구조물의 보다 현실적인 안전성 모니터링에 효과적으로 적용될 것으로 기대된다.

• 한국컴퓨터정보학회논문지
• /
• 제24권10호
• /
• pp.65-70
• /
• 2019

최근 선박자동식별장치의 도입으로, 육상에서 선박위치, 침로, 속력, 선박종류 등 선박 항적데이터 수집이 가능해 졌다. 본 연구는 맵리듀스 알고리즘을 분산처리 환경에 적용하여 선박 항적데이터를 효율적으로 처리하는 방법을 제안한다. 제안하는 방법은 데이터 전처리 단계, 맵핑 단계, 리듀싱 단계로 나뉘어져 있다. 데이터 전처리 단계는 선박의 동적 및 정적 데이터를 통합하고, 비관심지역의 선박정보는 필터링한다. 맵핑 단계는 선박 위치를 지오해시 코드로 변환하여 맵리듀스의 키 데이터로 할당하고, 선박의 ID는 값 데이터로 분리한다. 리듀싱 단계에서는 키 데이터가 같은 키-값 쌍 데이터를 추출하여 해당 그리드에서 선박의 수를 계산하여 시각화 한다. 제안한 방법은 항적데이터 분석에 있어서 기존 프로그램 성능에 비해 1~4배 성능 개선이 되었다.